This version of the SC115 is for OEMs. The OEM can purchase this product without a label or with a company label. The 26584 is a lightweight, portable instrument that can serve as a 2 GB storage device or as a USB-to-CS I/O synchronous device communications (SDC) adapter. When serving as a storage device, it allows you to augment your onsite data storage or to transport data between the data logger and PC. As a USB-to-CS I/O adapter, the 26584 supports direct communication between a Campbell Scientific data logger and a PC equipped with a USB port.
The 26584 is used with our newer data loggers, and is the only external storage device compatible with the CR800 and CR850 dataloggers (see Compatibility).
|Storage Capacity||2 GB|
|Power Requirements||12 V (supplied through the PC’s USB port or the data logger’s CS I/O port)|
|Packaging||Overmolded with thermoplastic polymide|
|Typical Current Drain||
|Dimensions||10.54 x 4.32 x 1.78 cm (4.15 x 1.7 x 0.7 in.)|
|Weight||63.79 g (2.25 oz)|
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
The SC115 has a CS I/O port for attachment to the data logger and a USB port for attachment to a PC. You can connect the SC115 to the PC or data logger either directly or via the supplied cables. An SC12 CS I/O cable and a USB cable are shipped with the SC115.
CRBasic TableFile instruction is used to store data to the drive. All other file I/O operations available through CRBasic will function with the SC115. Our Device Configuration (DevConfig) utility can be used for field configuration, OS download, and setting the SDC address. CRBasic and DevConfig are included in LoggerNet and PC400 datalogger support software.