RAWS-F
RAWS-F
RetiredRemote Automated Weather Station, Fire Weather
No longer available to order
This product is retained for service, documentation, and compatibility information.
- Model:
- RAWS-F
- Item Number:
- 18690
- Warranty:
- 1 year
Overview
Our RAWS-F Fire Weather Quick Deployment Station is ideal for prescribed burns or other temporary installations. Customers can set up the station in as little as 10 minutes—without tools. Each RAWS-F station is preprogrammed to monitor wind speed and direction, air temperature and relative humidity, precipitation, barometric pressure, and solar radiation. This program complies with the National Fire Danger Rating System (NFDRS) weather station standards.
Key Advantages
Ready for use in as little as
10 minutes, without tools
Technical Description
A RAWS-F station consists of an aluminum environmental enclosure mounted to a 6-foot tripod. The enclosure houses and protects a CR1000 datalogger and a 12-V battery that is recharged via a solar panel or an AC transformer. To facilitate sensor connection, the outside of the enclosure has color-coded, keyed connectors. A wiring panel is also provided allowing the RAWS-F to measure additional sensors.
Meteorological Sensors
Meteorological sensors included with the RAWS-F are the CS300-QD Solar Radiation Sensor, HC2S3-QD Air Temperature and Relative Humidity Probe, TE525-QD Tipping Bucket Rain Gage, and either the 034B-QD Wind Set (option -MW) or WindSonic4-QD 2-D Sonic Wind Sensor (option -GW). The CS100-QD Barometric Pressure Probe is available as an option (-QB), and the CS516-QD fuel moisture/temperature sensor can be ordered as a Common Accessory. (See Ordering Info on the web page.)
Sensor Connections
The outside of the enclosure has color-coded, keyed connectors for attaching wind speed and direction, air temperature and relative humidity, precipitation, solar radiation, and the optional fuel moisture/temperature sensors. Besides the connectors, a wiring panel is provided that allows the attachment of additional sensors that measure barometric pressure, stream flow, snow depth, or water depth.
Communication Methods
The RAWS-F typically communicates via our GOES satellite transmitter. It is also compatible with other communication equipment such as telephones, digital cellular transceivers, and radios.
Carrying Case
The station's components fit inside two carrying cases for easily transporting the station to your site.
Benefits
- Monitors, records, and transmits meteorological data relevant to fire danger prediction.
- Ideal for prescribed burns or other temporary installations.
- Can be set up in as little as 10 minutes—without tools.
- Preprogrammed to monitor wind speed and direction, air temperature and relative humidity, precipitation, barometric pressure, and solar radiation sensors.
- Complies with the National Fire Danger Rating System (NFDRS) weather station standard.
Specifications
- -NOTE-
- The RAWS-F has components that have their own specifications.
To review these specifications, refer to the appropriate products below: CR1000 Measurement and Control Datalogger TE525-QD Rain Gage for RAWS-F Station HC2S3-QD Temperature and Relative Humidity Probe for RAWS-F CS300-QD Pyranometer for RAWS-F Station 034B-QD Wind Set for RAWS-F Station WindSonic4-QD 2-D Sonic Wind Sensor with SDI-12 Output for RAWS-F Stations CS100-QD Barometer for RAWS Enclosures - Tripod Material
- Aluminum
- Enclosure Material
- Aluminum
- Hard Transport Case
- Holds sensors, enclosure, solar panel, crossarm, and antennas.
- Soft Transport Case
- Holds tripod, mast, and grounding kit.
- Connector Descriptions
- Color-coded keyed connectors for attaching sensors.
- Tripod Height
- 1.8 m
(6 ft)
- Tripod Weight
- 13.6 kg
(30.0 lb)
- Enclosure Dimensions
- 35.6 x 45.7 x 22.9 cm
(14.0 x 18.0 x 9.0 in.)
- Enclosure Weight
- 12.6 kg
(27.75 lb) fully loaded with CR1000M, connector panel, and 7 Ahr battery
- Hard Transport Case Dimensions
- 96.5 x 63.5 x 43.2 cm
(38 x 25 x 17 in.)
- Soft Transport Case Dimensions
- 94.0 x 45.7 x 15.2 cm
(37 x 18 x 6 in.)
- Hard Transport Case Weight
- 16.3 kg
(36.0 lb)
- Soft Transport Case Weight
- 4.1 kg
(9.1 lb)
Replacement Parts
(19)10075
BP24 24 Ah 12 V Sealed Rechargeable Battery without Mounting Hardware
The 10075 is the 12-Ahr sealed rechargeable battery that comes with the -24 Rechargeable Battery Option. This battery is available as a replacement item.
Orderable10873
Serial Data Cable, 9-Pin Socket (Female) to 9-Pin Pin (Male)
The 10873 is a 6-ft cable that terminates in a 9-pin female connector on one end and a 9-pin male connector on the other end. The female connector attaches to the RS-232 port on a PC, and the male connector attaches to the RAWS-F connector panel.
Orderable31962
1-Ring Replacement Bubble Level with Mounting Bumper and Hardware
Orderable6650
Enclosure Ground Wire, 36 in.
The 6650 consists of a 36-in. ground wire and lug connector. It may be purchased to replace a ground wire and lug connector that has been lost or damaged.
Orderable2207
4 in. Nylon Cable Tie
Five of these 4-inch cable ties are included with the RAWS-F. The cable ties have a flexible, nylon construction, and are available as a replacement item.
Orderable5449
Enclosure Ground Lug
The 5449 may be purchased to replace the ground lug originally attached to the RAWS-F enclosure. This ground lug is required to properly ground the RAWS-F.
Orderable18744
Plug for 1.38 to 1.75 in. Diameter Holes
One plug that covers a 1.38" to 1.75" diameter hole is included with the RAWS-F. The 18744 may be purchased to replace a lost or damaged plug.
Orderable18377
Plug for 0.45 to 0.81 in. Diameter Holes
One plug that covers a 0.45" to 0.81" diameter hole is included with the RAWS-F. The 18377 may be purchased to replace a lost or damaged plug.
Orderable5252
Circular Connector Receptacle Dust Cap with Chain
Four of these dust caps are included with the RAWS-F. They cover the WS/WD, FM/FT, TEMP/RH, and SOLAR RAD sensor connectors. The 5252 may be purchased to replace a lost or damaged dust cap.
Orderable5010
Circular Connector Receptacle Dust Cap with Chain
Three of these dust caps are included with the RAWS-F. They cover the PRECIP, SDI-12, and BATT CHARGER/SOLAR PANEL connectors. The 5010 may be purchased to replace a lost or damaged dust cap.
Orderable18397
Coaxial SMA Connector Protective Cap with Chain
This dust cap covers the GPS Antenna connector on the RAWS-F connector panel. The 18397 may be purchased to replace a lost or damaged dust cap.
Orderable18396
Circular Connector N Type Protective Cap with Chain
Two of these dust caps are included with the RAWS-F. They cover the RF OUTPUT and GOES ANTENNA connectors. The 18396 may be purchased to replace a lost or damaged dust cap.
Orderable18815
Black Nylon Hook and Loop Cable Tie
Five 11" Hook and Loop Cable Ties are included with the RAWS-F. The 18815 is available as a replacement items.
Orderable7363
Enclosure Supply Kit, Standard Size
The enclosure supply kit includes desiccant, a humidity indicator card, cable ties, wire tie tabs, putty for sealing the conduit, and screws and grommets for attaching peripherals to the enclosure backplate.
Orderable17049
Galvanized Steel Grounding Spike 1/2 x 16
The 17049 may be purchased to replace a lost or damaged spike.
Orderable16770
TurfWeather Tripod Installation Kit
The 16770 provides equipment for installation of a RAWS-F station to the correct 3-axis vertical orientation and to align the station to the magnetic North.
Orderable1013
3/8 x 1/2-1 Clamp for Lightning Rod
This clamp attaches the lightning rod onto our tripods and towers. The 1013 is shipped with our tripods and towers, and it may be purchased to replace a lost or damaged clamp.
Orderable7364
UV-Resistant 8 in. Cable Ties (quantity of 12)
The kit includes 12 Tefzel® 8 in. cable ties (pn 7362) that are resistant to gamma radiation, UV radiation, and chemicals.
Orderable34040
10 A External Battery Cable for CH150, CH200, CH201, PS150, or PS200
The 34040 connects a PS150, PS200, CH150, CH200, or CH201 power supply to an auxiliary, 12 V flooded battery such as a deep-cycle marine or RV battery. This is helpful when the battery is not in the same enclosure as the charge regulator/controller. The cable length is 3.048 m (10 ft). This two-conductor cable has a two-pin connector on one end that attaches to the power supply, and pigtails on the other end that attach to the battery.
Orderable
Compatibility
Sensors and solar panels with a "-QD" suffix have a cable that terminates in a military style connector that attaches to the RAWS-F. The cable length of these products is ideal for attachment to the RAWS-F tripod.
Sensors
The following sensors can be attached to the connector panel.
| Connector Label | Compatible Sensors (one sensor per connector) |
| WS/WD | 034B-QD |
| FM/FT | CS516-QD |
| Temp/RH | HC2S3-QD |
| PRECIP | TE525-QD |
| SDI-12 | WINDSONIC4-QD |
| SOLAR RAD SDI-12 |
CS300-QD |
Barometer
The CS100-QD barometric pressure sensor is also compatible. It is mounted inside of the RAWS environmental enclosure and the sensor wires are attached to the CR1000 printed circuit board wiring panel.
Battery Chargers and Solar Panels
The following can be used to recharge the internal battery.
| Connector Label | Compatible Device (choose one) |
| BATT CHARGER/ SOLAR PANEL |
18897 wall charger, SP10-QD 10 W solar panel, SP20-QD 20 W solar panel |
Communications
Our GOES satellite transmitter is offered as an option for the RAWS-F. It is also compatible with communication equipment such as telephones, digital cellular transceivers, and radios.