CS310
 
CS310 w/CS310 Cable
 
Cable Length Options - show details
-10 -10 w/10ft per Probe
The -10 option should be used with typical Campbell Scientific tripod applications.
-17 -17 w/17ft per Probe
The -17 option is helpful when using a CM206 (6 ft crossarm).
-33 -33 w/33ft per Probe
The -33 option is necessary if the CS310 will be used on a 10 m tower.
-50 -50 w/50ft per Probe
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Restockable Yes
Warranty 4 years
Compliance CE Compliance Image RoHS Compliance Image
Ships With
(1) Mounting screw from original mfg

Common Accessories

CM226
 
One of two mounting options is needed per sensor. The CM226 is one of the options. The CM226 is a mount for Apogee solar sensors that integrates both the leveling and mounting hardware into one unit.
015ARM
 
One of two mounting options is needed per sensor. The 015ARM is one of two mounting options available. The 015ARM is used to attach the CS310 to a tripod.
18356
 
One 18356 leveling base is needed per each CS310 sensor. The 18356 provides several functions:
  1. It provides a secure, stable mount for the CS310. A bolt secures the sensor to the leveling base.
  2. The bubble level and three leveling screws allow the sensor to be adjusted to level for accurate measurements.
  3. The base can be attached to a CM225 Solar Sensor mount using three mounting screws, which allows the sensor to be deployed on a variety of instrument mounts.

Replacement Parts

CS310CBL
 
CS310CBL Replacement CS310 Cable
 
The CS310CBL is easily replaced by the user. It consists of 26 AWG conductors insulated in polypropylene in a shielded two-conductor configuration with a drain wire; the cable jacket is composed of black Santoprene. The CS310CBL has a six-pin weatherproof connector that quickly attaches to the CS310 Quantum Sensor. The cable can be terminated with tinned wires or a prewired connector.
Cable Length Options
-10 -10 w/10ft per Probe
-17 -17 w/17ft per Probe
-33 -33 w/33ft per Probe
-50 -50 w/50ft per Probe
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Services

 
The 30008 provides a recalibration of the CS310 Quantum Sensor with a certificate. An RMA (Returned Material Authorization) from Campbell Scientific is required.