CM226
CM226
OrderableSolar Sensor Mounting Stand with Level and Base
Overview
The CM226 is a mount for Apogee solar sensors that integrates both the leveling and mounting hardware into one unit.
Technical Description
The CM226 integrates both the leveling and mounting hardware into one unified mount that can be attached to either a horizontal pipe or vertical mast. The mount is made entirely from aluminum and features brass thumb screws for level adjustment and a bubble level that can be viewed from either above or beneath the sensor. The mounting hardware is all integrated for tool-free installation. Sensors can be attached or removed without dismantling or removing any portion of the mount, making it easier to swap sensors or return sensors for recalibration.
Specifications
- Why/When to Use
- Designed for Apogee solar sensors, this mount combines the leveling and mounting hardware needed to install the sensor.
- Dimensions
- 15.2 x 9.1 x 9.1 cm
(6.0 x 3.6 x 3.6 in.)
- Weight
- 0.36 kg
(0.8 lb)
Replacement Parts
(7)3294
Silicone O-Ring 0.188 ID 0.94 Wide
The 3294 silicone O-ring is a replacement part used on the CM226 solar mount. The part is installed between the brass thumb screws and mounting plate.
Orderable10047
Brass Thumb Screw #10-32 X .750
The 10047 brass thumb screw is a replacement part for the CM226 solar mount. These screws are used to adjust the level of the sensor.
Orderable34378
302 Stainless-Steel Compression Spring
Three of these stainless-steel compression springs are supplied with the CM226 to adjust the level of Apogee solar sensors. The 34378 may be purchased to replace a lost or damaged spring.
Orderable31922
5/16-18 X 3.5 Stainless-Steel Carriage Screw
The 31922 is a 5/16-18 x 3.5 in. stainless-steel bolt. It is used to mount the CM226 Apogee solar sensor mount to a vertical pipe or horizontal pole. The 31922 may be purchased to replace a lost or damaged bolt.
Orderable27552
5/16-18 Brass Wing Nut
The 27552 is a 5/16-18 brass wing nut.
Orderable4365
Stainless-Steel Flat Washer 5/16
The 4365 is a 5/16" flat washer.
Orderable4366
Stainless-Steel Lock Washer 5/16
The 4366 is a 5/16" lock washer.
Orderable
Compatibility
The CM226 is compatible with pipes that have a 5.1 cm (2.0 in.) outer diameter or smaller.
Compatible Products
(7)CM300
23 in. Mounting Pole with Cap
OrderableNotes—CM305
47 in. Mounting Pole with Cap
OrderableNotes—CM310
56 in. Mounting Pole with Cap
OrderableNotes—CS320
Digital Thermopile Pyranometer
OrderableNotes—CS301
Pyranometer
OrderableNotes—CS310
Quantum Sensor
OrderableNotes—SP230SS
Heated Pyranometer
OrderableNotes—
