Product Details
Typically Ships Within 0 - 7 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

17953
 
This NU-RAIL® Crossover Fitting is used to mount a sensor with a 1 in. IPS mounting pipe (typically a wind sensor) to the crossarm. It provides equivalent functionality as the CM220 Right Angle Mounting Bracket.
1049
 
This NU-RAIL® Crossover Fitting is used to mount a sensor with a 0.75 in. IPS mounting pipe (typically a wind sensor) to the crossarm. It provides equivalent functionality as the CM220 Right Angle Mounting Bracket.
CMB200
 
The CMB200 Crossarm Brace Kit is designed to provide additional stability to the CM203 crossarm mounted on Campbell Scientific tripods and towers. This kit provides support for crossarms with heavier or sensitive sensor loads, as well as added stability in higher winds. Each kit includes one brace arm and three sets of mounting brackets.
CM220
 
The CM220 Right-Angle Mounting Bracket attaches a sensor that has a 1 in. IPS or 0.75 in. IPS mounting pipe (e.g., most wind sensors) to the crossarm.
CM230
 
The CM230 Adjustable Inclination Mount secures a directional (Yagi) antenna or a sensor that must be pointed at a specific target (e.g., SI-111, SR50A) to the crossarm.
CM225
 
The CM225 can attach one pyranometer or quantum sensor to the crossarm.
CM235
 
The CM235 can attach one peripheral with a magnetic base to this crossarm. Devices that have a magnetic base include our GPS16X-HVS Geographic Position Receiver, GPS antennas, and some short-range omnidirectional antennas.
41003-5
 
This 10-plate Gill radiation shield accommodates one HC2S3 temperature and RH probe. The shield's louvered construction allows air to pass freely through the shield thereby keeping the probe at or near ambient temperature.
41303-5A
 
This 6-plate radiation shield accommodates one 107, 108, 109, HMP60, or CS215 probe. The shield's louvered construction allows air to pass freely through the shield thereby keeping the probe at or near ambient temperature.
RAD06
 
The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.

Replacement Parts

CM210
 
The CM210 is included with the CM203 crossarm but may also be ordered separately as a replacement item. It attaches the CM203 to a tripod mast or tower leg.