Product Details
Restockable No
Warranty
Compliance
Ships With
(1) 6290 #1 Phillips Screwdriver
(2) 6596 Electrician's Putty for Sealing Enclosure Conduit
(4) 4905 Desiccant 4-Unit Bag
(1) 28878 Replacement Enclosure Humidity Indicator Card
(6) 2207 4 in. Nylon Cable Tie
(6) 4005 8 in. Nylon Cable Tie
(4) 2376 Adhesive-Backed Cable Tie Mount
(1) Conduit Plug
(8) 505 Screw #6-32 x .375 Pan Phillips
(8) 6044 Grommet for #6 or 8 Screw
(1) Instruction sheet
(1) 25745 PVC Conduit 1.5 in. to 0.5 in. Reducer

Replacement Parts

2207
 
Six of these 4-inch cable ties are included with the 7363 Enclosure Supply Kit. Once attached, the cable tie must be cut to be removed.
2376
 
Four of these small, square, adhesive-backed mounts are included with the 7363 Enclosure Supply Kit. The 2376 attaches to the inside of an enclosure to provide an "anchor" for attaching the cable ties.
4005
 
Six of these 8-inch cable ties are included with the 7363 Enclosure Supply Kit. Once attached, the cable tie must be cut to be removed.
4905
 
The 4905 provides a single, 4-Unit Silica Desiccant Bag. It is used to desiccate the enclosure and must be periodically replaced.
505
 
Eight of these screws are used to secure our equipment to the enclosure backplate.
6044
 
Eight of these grommets along with the 505 screws are used to secure our equipment to the enclosure backplate.
6290
 
The 6290 provides a Phillips head screwdriver. This screwdriver can drive the #505 screws into the #6044 grommets, which are in turn seated into the square holes in our enclosure backplates.
28878
 
This card provides a visual reference of humidity level inside the enclosure. Colored circles change color from blue to pink to indicate humidity levels of 30%, 40%, and 50% relative humidity. Desiccant inside of the enclosure should be replaced when the relative humidity exceeds 35%.
 
The 6596 provides a 4-ounce container of putty. The putty is used to seal the enclosure conduit.
 
The 25745 is used to reduce the size of the conduit opening when only a couple of wires are threaded through. With the reducer, there is a smaller opening that needs to be filled with putty to seal.