Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
Working with SerialIn ccowin 2
Get device settings via RTMC in runtime a.kim 0
RTMC Pro expression windgust direction Makada 22
CR1000 Strain Gauge Limiations jakewagner 9
GPS16X-HVS / April 6, 2019 leap second issue GaryTRoberts 0
Change schedule interval of loggernet from datalogger side a.kim 2
Reboot remotley SanibelJack 1
Skipped Scans using SDI-12 with CR6 at 1-Second Scan Interval dbrese_stone-env 4
CR1000 not calculating rainfall data corrcetly Tim ECWCD 7
protocol for getvariable smile 1
LoggerLink, iOS/Android & Serial to WiFi Dongle Modernlog 12
CR1000x with RV50 via Modbus TCP/IP Michael Ng. 1
CR1000, lack of control port, use excite? uta 2
How to set PPPInterface and BaudRate of the PPPInterface in CR1000X? Italo 1
CR1000, LoggerNet and CWOP tedphill 4
4-20ma.sensor with cr1000x chalit 9
How to collect now from webserver CD 0
Problems sending os obj file to cr1000 4mb holf 0
Failed to connect when updating CR1000 operating system Eliz 4
GetDataRecord MaxRecord Value trouble retrieving data correctly cobinov 0
Send and Receive SMS (Short Message Service) oldnick 2
SNMP on CR310 Romu 2
TimerInput high and low edge timing TomWind 3
CR1000 serail receive bytes jonny 2
Customized heading to FTP-uploaded data file OlaLa 0
RTMC opens and then closes (4.4.2) Nightwolf 1
CSI Web Server not displaying data on website Chitch 4
Display a TDR trace in RTMC Pro MortenS 0
CR1000 SDM Status MortenS 0
Continuous scan for fast timer interrupt TomWind 2