User Forum A 24/7 resource for Campbell Scientific users

Hi! I m using CR1000x datalogger. How to Upload new version of software with additional instruments without amy glitch and data loss. It shows error 'table definition suspected' and it stopped communication. So I have to manually remove datalogger power and restart it to reinstate communication, the new program then ran smoothly.

This can be frustrating, but there are several steps and best practices you can follow to avoid glitches and data loss while uploading new programs to your CR1000X datalogger.

1. Backup Data Before Updating

Always ensure you have a complete backup of your current data and configuration before uploading any new software. You can use LoggerNet or RTDAQ (if you're using those) to download the current data and program. This will prevent data loss in case anything goes wrong during the update.

2. Check for Compatibility Issues

The error "table definition suspected" can sometimes occur due to compatibility issues between the new software version (or program) and the existing configuration. Here are a few things to check:

• Table Definitions: Ensure that the new software version or program does not conflict with existing table definitions (e.g., data tables, array sizes, etc.) in the datalogger's existing setup.
• New Instruments/Channels: Make sure the new instruments you're adding are properly defined and that their channel assignments don’t overlap with existing ones.
• Software Versions: Ensure the software and any associated firmware or libraries you're using are compatible with the version of the CR1000X you have.

3. Use LoggerNet for a Smooth Upload

LoggerNet is the primary software for communicating with Campbell Scientific dataloggers like the CR1000X. When uploading new programs, make sure you:

• Use the latest version of LoggerNet. Sometimes older versions may have bugs or compatibility issues with newer datalogger firmware.
• Upload Program in Stages: If you're uploading a large program with many changes, try uploading it in smaller chunks or stages. This reduces the chance of communication errors or data corruption.

You can also use Device Configuration in LoggerNet to configure the CR1000X datalogger more easily and minimize errors.