Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

program example for Vaisala GMP343

furban Jul 24, 2022 04:29 PM

Does anyone have a program example they can share to collect data from a Vaisala GMP343 carbon dioxide probe?  It is a RS232 interface and I would like to connect several of these probes to a CR1000 or CR1000X.  Thank you in advance!

Makada Jul 25, 2022 06:56 PM

Hi furban,

I found this post, maybe of help for you i hope:)

With the kindest regards,

Mark

https://www.campbellsci.cc/forum?forum=1&l=thread&tid=16019

And/or

https://iro.uiowa.edu/view/pdfCoverPage?instCode=01IOWA_INST&filePid=13730785340002771&download=true

* Last updated by: Makada on 7/25/22 @ 7:01 PM *
furban Jul 26, 2022 07:31 AM

Thank you- this is a good place to start- I wish Campbell would provide a solid base program for this sensor.

Log in or register to post/reply in the forum.