Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CR1000X Datalogger - Example code to use a GSM Modem with the datalogger

Shreeshant Mar 31, 2021 12:32 PM

Hello!

I am trying to use a GSM Modem with the CR1000X Datalogger to post the data to the server. Is there any codes or instruction that will help me to begin with this process and give me a slight idea on how i should proceed? 

smile Apr 2, 2021 06:18 PM

Hi

here you can find almost everything

https://s.campbellsci.com/documents/eu/manuals/cs-gsm_gprs%20-%20997.pdf

Shreeshant Apr 5, 2021 05:23 AM

Hi!

Thank you for providing me the link. Is this manual only useful if we use the CS Modems or it canbe helpful in programming for other GSM modems too? I will also check the manual. 

smile Apr 5, 2021 06:21 AM

Hi, it is a starting point, the AT commands are all somewhat the same.

Shreeshant Apr 5, 2021 08:02 AM

Hi!

Thanks a lot. 

Log in or register to post/reply in the forum.