Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Communication CR10X via WIZ110SR


LeoFurst Nov 16, 2018 08:50 AM

Hello everyone,

I'm trying to remote access one weather station with the CR10X datalloger. The idea would be to communicate the module to a modem using the WIZ110SR module ( https://www.wiznet.io/product-item/wiz110sr/ )  and thus be able to access the datalloger remotely. So I would like to know if the communication protocol with the datalloger is open and the necessary commands that I should send to perform the data collection. All suggestions are welcome, thanks in advance.


smile Nov 18, 2018 09:36 AM

Hi

from CS web site you can download the free PC200W sw.

https://www.campbellsci.com/downloads/pc200w

It is a package of applications that complete the total use of functionality with the logger, with the limit of local connection to a PC serial port, virtual serial port in your case.

Smile

Log in or register to post/reply in the forum.