All FAQs (1993 total: showing 1921-1940)
- What is the measurement resolution, in Hertz, of the AVW1, AVW4, or AVW100? Do these interfaces have any certifications of compliance?
- Does the AVW100 work with Edlog Instruction 28 or 131?
- How can the data logger build a text string and send it out the RS-232 port?
- What is needed to write a simple program that will read two analog channels (0 to 10 Vdc)?
- When dialing up the 21X, the barometric pressure data is displayed in real time. When the data is collected via either dial-up or a storage module, the barometric data are all zeros. Why does this happen?
- Can a point-multipoint network be built using RF401 radios with a base and three remote terminals, a data logger at each terminal, a COM210 modem, and a remote PC with LoggerNet software?
- Does Baler 2.2 work with a CR800? Is a more recent version of Baler needed?
- In what format does the Baler Client Software save the data? Are there format options?
- Is there a patch for the current version of Baler?
- When trying to start LoggerNet, what might cause the "Unable to start program because the Campbell Scientific communications server is already running" message?
- After installing an upgrade to the current version of LoggerNet, why does the Toolbar no longer show all the buttons?
- Why is the battery in the BP12 and BP24 assembly taller than the bracket?
- Is there a meter that can measure the atmospheric vertical electric field without connecting to the Earth?
- What should be done if a compiling error message is received after inserting a new PC card into the CR5000?
- Can a non-standard port for telnet access to the NL100 be specified in OS 7?
- Which version of the OPC DA specification does the PC-OPC Server work with?
- What are the CR9000X download instructions for an operating system upgrade?
- Is there a sample program available for the CR1000 for eddy-covariance applications?
- Where is the Transformer tool?
- What is the stated accuracy for the thermocouple (temperature measurement) in a 229-L Water Matric Potential Sensor?
Previous
Next