LoggerNet Patch

LoggerNet: Fixed an issue where User Accounts were always created with only Read Only access.

LoggerNet: Fixed an issue where updating from version <= 4.6.2 and below would crash the LoggerNet server.

DevConfig: Added a new setting for the CR1000X, CR6, and Granite dataloggers that controls the range of TCP ports used for active FTP mode for the FTPClient() command.

DevConfig: Updated connect instructions for the CS241DM to reflect changes to the G2.

Updated code and libraries to ensure continued compatibility on supported platforms.

Added optional usage reporting to help us improve product performance and user experience.

TOOLBAR: Fixed an issue that could prevent the toolbar from starting if the update check failed.

TOOLBAR: Improved internal code to support better stability and future enhancements.

TOOLBAR: Fixed an issue that could cause incorrect or missing toolbar icons in certain cases.

CONNECTSCREEN: Restored support for the CR5000 in the Calibration Wizard.

CRBASICEDITOR: Fixed a visual spacing issue with datalogger items on the opening screen

DEVCONFIG: Added support for CS241DM G2.

DEVCONFIG: Fixed an issue where the 'No Updates Available' message was missing from the Manage OS panel.

DEVCONFIG: Resolved a bug that caused some devices to be incorrectly identified as the same type.

DEVCONFIG: Resolved a bug that prevented certain dataloggers from finding updates when checking the update server.

DEVCONFIG: Added support for AL200X.

DEVCONFIG: Fixed an issue where the application could create incorrect folder paths if a working directory setting was missing.

DEVCONFIG: Added support for the AtmosVue 30 and AtmosVue 40.

DEVCONFIG: Added support for the ClimaVue 40.

DEVCONFIG: Fixed an issue where updates would fail in the Manage OS panel.

DEVCONFIG: Added support for the cloud config sub-panel for GRANITE dataloggers.

DEVCONFIG: Fixed a bug where canceling a datalogger OS update had no effect.

DEVCONFIG: Fixed bug where the Settings Editor table display fails to render '<' and '>' symbols.

ShortCut: Added support for CS241DM G2.

ShortCut: Added support for ModBus Client/Server capabilities to the CR1000X and CR6.

LoggerNet - (Feature) Added support for the CR1000Xe datalogger (as part of the CR1000X Series dataloggers).

LoggerNet - (Feature) Changed the LoggerNet loading splash screen, so it does not force itself to the front of the screen.

LoggerNet - (Minor) Fixed an issue where upgrading from PC400 to LoggerNet was not transferring the full working directory over.

LoggerNet - (Minor) Fixed an issue where installing the Software Updater to a custom location was not following the specified path.

LoggerNet - (Minor) Updated compilers and 3rd party dependencies to the latest versions.

DevConfig - (Feature) Added support for the CR1000Xe datalogger (as part of the CR1000X Series dataloggers).

DevConfig - (Feature) Added support for the “Secure By Default” initiative for the CR1000X Series and CR6 Series dataloggers.

DevConfig - (Major) Fixed an issue where a CR350-RF407’s deployment panel was not enumerating settings related to COM_RF.

Short Cut - (Feature) Added support for the CR1000Xe datalogger (as part of the CR1000X Series dataloggers).

Short Cut - (Feature) Added support for the RangeVUE15/30 and TempVUE20 (MODBUS) sensors.

Short Cut - (Feature) Added a sleep/wake control for CELL2XX modems.

Task Master - Major: Fixed an issue that was stopping Task Master tasks from having a base time other than midnight.

Network Planner - Major: Fixed the ability to edit program settings for the CR350 within the “Station Summary” screen.

Task Master - (Major) Fixed an issue that was stopping Task Master tasks from having a base time other than midnight.

Network Planner - (Major) Fixed the ability to edit program settings for the CR350 within the “Station Summary” screen.

LoggerNet - (Major) Fixed an issue where the Chinese and Russian language files were improperly generated and showing all question marks instead of translated text.

Setup - (Minor) Removed old debug code that would cause the Setup Screen to throw a “Range Check Error” in certain conditions.

CRBasic - (Minor) Help files for CRBasic instructions had minor fixes.

LoggerNet - (Major) Added the ability to turn Automatic Update checks on or off.

LoggerNet - (Major) Fixed an issue where LoggerNet could shut down exceptionally slowly.

LoggerNet - (Major) Changed the install so it doesn’t update RTMC if a pre-5.0 version of Pro is installed.

LoggerNet - (Feature) Added standalone support for the CR350. Previously, it was included as a part of the CR300 Series loggers.

LoggerNet - (Feature) Added default file filter for programs on the CR350 (.CRB). Updated CR300 filter to show both .CR300 and .CRB by default.

LoggerNet - (Feature) Added a new log file called "FTPLastTx.log" that provides details about the last FTP task that was run. It will be overwritten with each FTP event.

Setup - (Major) Removed IPManager settings.

Setup - (Major) Fixed a Setup Screen crash that occurred when switching views.

Connect - (Moderate) Fixed an issue in the file control screen where some information would update when a Datalogger program was sent from another application, but other information wouldn't.

Connect - (Moderate) Fixed a bug where the currently collected table wasn't saved with the correct timestamp filename when using "Custom Collection".

ViewPro - (Moderate) Fixed a clipping issue where text on minimal width columns would overwrite the next column.

ViewPro - (Minor) Inside TOB1 files, Booleans now show up as true/false instead of as -1/0.

ViewPro - (Feature) Added legend gradient controls to the line graph properties form. These settings are also included to the saved defaults.

ViewPro - (Feature) When record numbers aren’t sequential, they are now separated with a horizontal black line. The record after the line has a cream-colored highlight. This setting can be turned off manually.

Troubleshooter - (Moderate) Fixed an "Out of Memory" error that occurred when the Troubleshooter was already open and the Connect screen failed to connect to a datalogger directly.

LogTool - (Feature) Added the ability to sort stations alphabetically.

RTMC - (Moderate) Removed the grey workplace border that displays around projects in Run-time.

RTMC - (Feature) Added functionality to allow the user to change subcomponent names.

Short Cut - (Major) All bridge measurements now check for channel adjacency.

Short Cut - (Moderate) Changed Modbus Master/Slave terminology to Client/Server.

Short Cut - (Moderate) Added C1-2 and SE1-4 as additional terminals for switch closure measurements on the CR350 datalogger.

Short Cut - (Minor) Fixed a bug where 4-20mA generated CRBasic code didn’t match the wiring diagram.

Short Cut - (Feature)Added support for the following sensors: Wintersense Road Surface Temperature Sensor, TempVue10 (4-wire) Temperature Probe, TempVue20 (SDI-12) Temperature Probe, TempVue50 (SDI-12) Water Temperature Probe, SnowVue10 Digital Snow Depth Sensor, CS320 Digital Thermopile Pyranometer (SN>3505).

CRBasic Editor - (Moderate) Fixed an issue were jumping to a subroutine (Ctrl+Y or blue arrow on the toolbar) could find the wrong subroutine if the full name and params are a subset of a different subroutine.

CRBasic Editor - (Feature) Using the Goto Navigation menu (Ctrl+G or green arrow on the toolbar), the subroutine options now also include functions.

DevConfig - (Major) Added the ability for DevConfig to automatically check for updates if the user allows it.

DevConfig - (Major) Changed the .csipasswd format so that an "admin" is no longer created by default, nor is it required.

DevConfig - (Minor) Added an evaluator to check passwords for certain conditions to consider it a strong password.

DevConfig - (Minor) Replaced all references to the RF451 model with RF451/RF452 to reflect support for the new Freewave radio module.

DevConfig - (Minor) Default directory used for storing config files now references "\\AppData\\AppLocal" instead of roaming.

DevConfig - (Feature) Added the Security Check tab for PakBus dataloggers that displays the results of a security audit and provides links to the panel/subpanel that has a control associated with the setting.

DevConfig - (Feature) Added a new button to the collect data panel that provides a short cut to unselect all tables.

DevConfig - (Feature) Added support for the SPECTRUM 100, SDM-SIO2R, CR350-RF452/CR350-CELL230 devices, as well as a CR6/CR1000X with an attached cell modem.

LoggerNet - One of the main efforts in the development of LoggerNet 4.7 has been support for the new CR350 Series datalogger. (Note that in the main LoggerNet interface, the CR350 is considered a CR300Series datalogger. However, in Device Configuration Utility, Short Cut, and the CRBasic Editor, it is a separate device.)

LoggerNet - An Allowed Neighbors tab has also been added to the PakBusPort device. This allows you to specify a list of PakBus addresses that the port will accept as neighbors.

LoggerNet - In addition, a Neighbor PakBus Address field has been added to the Datalogger Settings screen in the EZSetup Wizard. This allows you to specify the neighbor you will go through to connect to your datalogger. For example, this can be used to enter the PakBus address of a Konect PakBus router.

LoggerNet - Also, a TCP Password field has been added to the Security Settings screen in the EZSetup Wizard to control IP access to a datalogger.

LoggerNet - In LoggerNet Admin, you can now add, delete, and edit stations while viewing a subnet. Previously, you had to change your view to the whole network before making station changes.

LoggerNet - A Software Updater has been added to LoggerNet and Device Configuration Utility that can automatically notify you and update your software when a new release is available. See LoggerNet Options.

LoggerNet - Users of Campbell Scientific's LNDB database software who are using a PostgreSQL or Oracle database can now access the data directly from the database with View Pro. In addition, View Pro now allows you to set graphs to start maximized, set default settings for all new line graphs, and jump to the beginning or end of a line graph.

LoggerNet - RTMC and RTMC Run-Time have been updated to version 5.0.

LoggerNet - Note: If you are using an older version of RTMC Pro and plan to continue creating RTMC projects, we recommend that you upgrade to RTMC Pro 5.0.

DevConfig - Added support for the CR350 measurement and control datalogger.

DevConfig - Added support for the BaroVUE10 digital barometer.

DevConfig - Added support for the CS250DM PT-1000 Class A, precision air temperature sensor with digital Modbus RS-485 output.

DevConfig - Added support for the GRANITE TEMP 408 isolated thermocouple module.

DevConfig - Added support for the GRANITE VOLT 408 isolated analogue input module.

Short Cut - Support for the CR350.

Short Cut - Support for the GRANITE TEMP 408-K, GRANITE TEMP 408-T, GRANITE VOLT 408-V10, and GRANITE VOLT 408-V60.

Short Cut - Improved 4 to 20 mA Current Input support.

Short Cut - New sensor files: BaroVUE10 (SDI-12) Barometric Pressure Sensor, ClariVUE5/ClariVUE10 Turbidity Meter, MS-80 (Pt100 temp) Secondary Standard Pyranometer, RainVUE10/RainVUE20 Rain Gauge.

Short Cut - Main Processing Board Temperature for GRANITE9 and GRANITE10.

Short Cut - Internal GPS Receiver for GRANITE9 and GRANITE10.

Short Cut - CS250DM (MODBUS RS-485 at 19.2K baud) PT-1000 Class A, Temperature Sensor.

LoggerNet - • RTMC and RTMC Run-Time have been updated to version 5.0. (Note: If you are using an older version of RTMC Pro and plan to continue creating RTMC projects, we recommend that you upgrade to RTMC Pro 5.0.)

Fixed an issue with Subnets in the LoggerNet Admin Setup Screen. If one updated to v4.6.1 and Subnets were being used, the Subnet button did not work, and the network map appeared empty.

Fixed an issue with language support on non-English Windows operating systems.

Added support for the GRANITE 6, GRANITE 9, and GRANITE 10 DCPs.

RWIS Administrator was removed from the LoggerNet Suite of applications.

Fixed the toolbar menu when the font was being displayed with a font that was too large.

Chinese (Simplified) language is now included in the install by default.

Modified the code so that the Toolbar will now start correctly when the toolbar.xml file is missing.

Updated the app icons hints when changing languages so that they work correctly.

Fixed an issue where the full toolbar was not being drawn when shown in full size mode with the windows caption.

Added Alert2Admin under the main group (LoggerNet Admin only). It will now show up properly with the other applications when it is found installed in the LoggerNet directory.

Connect Screen - Modified the Connect Screen to use an Int64 to track the collection metrics.

Connect Screen - Modified the Connect Screen to use an Int64 when reporting the size of a data file.

Connect Screen - Added a menu item that allows the user to choose to monitor the statistics of their network or not.

Connect Screen - Changed the behavior such that if the user changes the symbols they want to display, that the option to show that symbol for the trace is selected. This saves the user a step, on the assumption that if they change the symbol they want to see, that they actually want to see it.

Connect Screen - Modified the code to catch an error when the user tries to set the clock to an invalid format so that it shows a better error message.

CoraScript - Added an optional parameter to the LoggerNet Restore Snapshot command that allows the client to specify the state of the LoggerNet commEnabled state when the restoration is complete.

CoraScript - Changed the logic governing login management so that the login.xml file can now specify the maximum number of logins to manage and can also be locked to prevent the client from overwriting it.

CoraScript - Added a new command, create-data-file-import-area, which can be used to create a special kind of collect area that serves to import data from data files in a watch directory (specified by a setting) into new or existing cache tables.

CoraScript - Added the logger-query-ex command for table based dataloggers.

CoraScript - Added an option to the logger-query-ex command that allows the user to specify the reported station name.

CRBasic Editor - Added the ability to use CAN .dbc file for use with new CAN-FD read and write instructions

CRBasic Editor - Added support for CRB files and programs.

CRBasic Editor - Made it so that the parameter check for conditional parameter is not case sensitive.

CRBasic Editor - Fixed a problem with instruction search and last item in list (XOR).

CRBasic Editor - Changed the CRBasic editor to no longer try to write to HKEY_LOCAL_MACHINE hive when associating files which can require admin privileges.

CRBasic Editor - Added the ability to select a .DBC file and fill out parameters for CANRead and CANWrite on the GRANITE 10. This is similar to how the SDMCAN allows selecting of a .PCK file but it uses DBC2PCK.exe for the user.

CRBasic Editor - Added a small change to make the parsing of datalogger type on the first line more flexible.

CRBasic Editor - Optimized loading of the default template files to speed up the process.

CRBasic Editor - Fixed a bug where Compile, Save, and Send was not showing any loggers to send to with a dld extension. Now it shows a filtered list based on CRB or DLD extension.

CRBasic Editor - Fixed an MDI bug where part of MDI child form was hidden behind toolbar when the main form started maximized.

CRBasic Editor - Fixed an issue with editing an instruction with the insert edit dialog when using the insert instruction edit box. If a parameter has options, a selected option could show the comment for a previous option if the selected option does not have a comment.

CRBasic Editor - Modified the code to allow the "&" operator to be syntax highlighted.

CRBasic Editor - Fixed a problem where the instruction edit box would not show the comment for a parameter if that parameter used the rg#DefaultName? The look up for the comment needed the actual name to work.

CRBasic Editor - Modified to now allow the "File Save As" to set the correct extension. Fixed by setting the default extension.

Device Configuration Utility 2.23 - Add support for TX326.

Device Configuration Utility 2.23 - New settings added to the CR1000X, CR6, GRANITE 6, GRANITE 9, and GRANITE 10 dataloggers that allow the user to edit IPv6 domain name servers.

Device Configuration Utility 2.23 - Help for various settings in the ALERT205 have been updated.

Device Configuration Utility 2.23 - Added tooltips for labels in left panel controls.

Device Configuration Utility 2.22 - Added support for the GRANITE 6, GRANITE 9, and GRANITE 10 Measurement and Control Data-Acquisition Systems.

Device Configuration Utility 2.22 - Added support for the LevelVUE B10.

Device Configuration Utility 2.22 - Added support for the TX325 GOES transmitter.

Device Configuration Utility 2.22 - Updated AL200 settings and help.

Device Configuration Utility 2.22 - Moved some retired dataloggers to the ‘Datalogger (other)’ category.

Device Configuration Utility 2.22 - Minor bug fixes and help changes needed to improve the customer experience.

Device Configuration Utility 2.21 - Added support for the GRANITE series VOLT 108, VOLT 116 and TEMP 120.

Device Configuration Utility 2.21 - Reorganized the left panel so that an IP address is kept separate from a serial port name and so that you can specify the PakBus address of the datalogger that might be connected through a PakBus router.

Device Configuration Utility 2.21 - AL200 Alert and Alert 2 bug fixes.

Device Configuration Utility 2.19 - Added new baud rates for the RS-232 port that are faster than the 115,200 KBaud rate for the CR1000, CR3000, CR800 Series, CR6, and CR1000X. These baud rates will only be available with an OS update and can only be used with a very short cable.

Device Configuration Utility 2.19 - Added new settings for the CR300 series dataloggers including "Trusted Hosts", "NTP Server", and "PCAP".

Device Configuration Utility 2.19 - Added settings for external CELL2xx connected to a datalogger that cover roaming and over the air update pending.

Device Configuration Utility 2.19 - Added support in the deployment panel for the CR300, CR6, and CR1000X dataloggers so that external modem parameters can be edited through the datalogger.

Device Configuration Utility 2.19 - Added support in the deployment panel for the CR1000X, CR6, and CR300 datalogger types for settings that configure an optionally attached CELL-200 series modem.

Device Configuration Utility 2.19 - Extended the baud rates available for the CR300 Series RS-232 port so that rates of 230400 and 460800 can be specified.

Device Configuration Utility 2.19 - Added a "Trusted Host" setting for the CR1000X and CR6 dataloggers.

Device Configuration Utility 2.19 - Added a dialog that can be used for testing serial port connections with loop-back adapters. This can be accessed from the Help menu.

Device Configuration Utility 2.19 - Various minor bug fixes and help changes needed to improve the customer experience.

Device Configuration Utility 2.18 - Added auto-update capability for DevConfig software.

Device Configuration Utility 2.18 - Added "Manage OS" panel to facilitate datalogger operating system updates (CR300, CR1000X, CR6 dataloggers).

Device Configuration Utility 2.18 - Added a new setting for the CR6 to specify the behavior of the Wi-Fi configuration button (Join a Network/Create a Network/Disable).

Device Configuration Utility 2.18 - Added new settings for the CR6 and CR1000X that specify verify and beacon interval values for PakBus/TCP connections.

Device Configuration Utility 2.18 - Added a "Maximum TCP Segment Size" setting for the CRx000 families of dataloggers.

Device Configuration Utility 2.18 - Assigned a maximum value of 10 Amps to the current limit setting for the charge rate for the CH201.

Device Configuration Utility 2.18 - Removed the "factory-write" attribute from the serial number setting for the CS475A.

Device Configuration Utility 2.18 - Edited the setting help files for the CR300 and CR6 so that the help looks better on the settings web page.

Device Configuration Utility 2.18 - Increased the size limit for the CR300 setting that reports cellular state.

Device Configuration Utility 2.18 - Updated the graphics in the about box header.

Device Configuration Utility 2.18 - Removed enable expressions for the HTTP service port and the FTP service port settings. The position of the enabling values is not the same across all device types that use this file.

Device Configuration Utility 2.18 - Updated the help for the CRx000 setting that controls PCAP output.

Device Configuration Utility 2.18 - Added a warning in the instructions for the data recovery wizard that identifies the requirement for OS25 or newer for the CR1000, CR3000, and CR800 datalogger types.

Device Configuration Utility 2.18 - Added a custom version string parser for the CR300 that will ignore anything beyond the dash in the model. This resolves an issue where the CR300 reported its daughter board as a part of the OS version model.

Device Configuration Utility 2.18 - Updated the connect and OS send instructions for the MD485 to change references to the word "modem".

Device Configuration Utility 2.18 - Updated the wiring table in the connect instructions for the CS240DM.

Device Configuration Utility 2.18 - Updated mbed-tls to version 2.9.0

Device Configuration Utility 2.18 - Added key filters for the edit control used for floating point components so that the control will only accept characters associated with floating point values.

Device Configuration Utility 2.18 - Updated the certificate used for signing applications and USB drivers.

Device Configuration Utility 2.18 - Corrected grammar errors in connected and off-line modes for various device types.

Device Configuration Utility 2.18 - Disabled Configuration setting for control port-based com ports (e.g., COMC1, COMC3).

Device Configuration Utility 2.18 - Updated settings help for the NL240.

Device Configuration Utility 2.18 - Removed a reference to the CS I/O port for CR300 baud rate settings.

Device Configuration Utility 2.17 - Added support for CR300-CELL2XX internal cellular modems.

Device Configuration Utility 2.17 - Made numerous device setting changes, cosmetic improvements, and added other new minor capabilities and optimizations.

Hole Monitor - Changed the logic governing login management so that the login.xml file can now specify the maximum number of logins to manage and can also be locked to prevent the client from overwriting it.

LoggerNet Server - Fixed a bug where the broadcast option of a Linux UDP socket was not set on the socket when it was opened.

LoggerNet Server - Changed the function that retrieves the IP interface addresses so that it can use the getifaddr() under posix implementations. This provides a better list of local interfaces than does the previous method.

LoggerNet Server - Added command line options for the loggernet daemon that will enable IPv6 service. (LNLinux)

LoggerNet Server - Changed the post install script so that the -U option is specified along with the useradd command that creates the loggernet user.

LoggerNet Server - Added a try/catch block in the posix TCP client component around the code that attempts connections on various resolved addresses. If a connection fails, the catch will ensure that the socket is closed and will allow us to attempt the next connection.

LoggerNet Server - Added a new value for to the respCode parameter of the Device Send File Status Notification and Device Send Program File Status Notification messages that will indicate that the logger reported that the file was incompatible. Added an optional parameter, explanation, that report the datalogger string that explains the reason for this incompatibility.

LoggerNet Server - Fixed a bug in the BMP5 file send operation where the datalogger explanation string was not read from the datalogger's response because the code was not reading the file offset from the body first. Also added code to ensure that the comms log messages recognize the incompatible file response code.

LoggerNet Server - Added a new collect area setting for ALERT2 sensor report areas that will control the data type that is used for the raw and processed values stored in the cache table.

LoggerNet Server - Changed the persistence values assigned to alert station sensor report collect areas so that they are all marked as user-defined. This will allow the user to rename or delete default areas.

LoggerNet Server - Changed the implementation of the device rename collect area transaction so that the notification for the collect area deletion is sent out before the new name is applied to the collect area.

LoggerNet Server - Changed the code that creates alert2 report areas so that, if the report value type is specified as an integer, the cache data type will be specified as an int4 rather than an int8.

LoggerNet Server - Fixed a bug in the alert2 report area where the table would not get recreated after the client had changed the report value data type setting.

LoggerNet Server - Changed the BMP5 enumerate files operation so that, if the client does not specify a preceding slash when it needs to limit the files sent, that slash will be provided automatically.

LoggerNet Server - Added code to log comms messages for the alert2 base when there is a communications failure

LoggerNet Server - Added code in the restore snapshot handler to work around a bug where, in older versions of backup files, files lengths were encoded as size_t (64 bits on 64 bit machines) instead of the expected uint4. The result was that, when attempting to restore the older file, the newer server would report it as corrupt. The validation code will now check the length encoding for the first file by reading eight bytes for the length and, if the least significant four bytes are zero, will expect all string lengths to be encoded with 64 bits instead of 32 bits.

LoggerNet Server - Fixed an oversight where the connection rules did not allow a CR1000X to be configured as a child to a CR800 router.

LoggerNet Server - Changed the current focus object state log messages produced so that they will include the destination address and transaction ids in the message. This will hopefully make it easier to track down problems with frozen focus.

LoggerNet Server - Fixed a bug where the alert2 base monitor command was not being removed when communications were disabled. This resulted in any attempt to delete the base while it was on-line getting stuck waiting for the base to go off-line.

LoggerNet Server - Changed the base PakBus router code so that, when a link is reported deleted and there are pending transactions that appear to use that link, a failure will be reported for those transactions. This may be of some use to customers who are experiencing problems with transactions getting stuck in the queue after a hello message timed out.

LoggerNet Server - Added code in the periodic save device handler for PakBus/TCP routers that will check the routes for any unrouted messages that have been enqueued for longer than one minute, require a static route, and there is a route for that static route's neighbour. When these conditions are satisfied, a delivery failure will be reported for that neighbour and port.

LoggerNet Server - Changed the log baler component to use the Csi::move_file() function to rename log files rather than the "C" run time version. The move_file() function can work with unicode file names while, apparently, the ::rename() expects multi-byte format.

LoggerNet Server - Changed the method that calculates the time stamp for an alert2 sensor report value so that, if the sensor report does not have a reported time stamp, the received time less any specified time offset will be used as the time stamp for the value.

LoggerNet Server - Fixed a bug where, if a table based collect area was renamed, the transactions that enumerate tables for data brokers and devices were not being updated.

LoggerNet Server - Removed the code that generates a default set of sensor reports when a new alert2 station is added. It is much simpler to allow the client to perform this as that leaves only one place where we have to worry about what those defaults should be.

LoggerNet Server - Changed the file control operation for BMP5 dataloggers so that, if an OS is being started, we will force the server to wait a minimum of 2.5 minutes (150 seconds) before attempting to restart the link to the datalogger.

LoggerNet Server - Added a watch dog timer for the communication command used to communicate with an ALERT2 base so that a beacon (\r\n) will be sent on the link if more than two minutes elapse without receiving any data on the link.

LoggerNet Server - Changed the rename() method for the base TableArea class for collect areas so that the tables written setting gets updated with the new name. This will ensure that the enabled state will be correctly reported to the table collator.

LoggerNet Server - Added an optional parameter to the LgrNet Restore Snapshot command that allows the client to specify the state of the LgrNet commEnabled state when the restoration is complete.

LoggerNet Server - Removed support for the NTCIP-RWIS version 1 and version 2 type stations. These relied on increasingly antiquated libraries that were difficult to update and rebuild for static linking and were not used by our customers.

LoggerNet Server - Fixed a bug in the windows version of TCP clients where socket handles could be leaked when trying more than one address to reach a named host. This manifested as a server lock-up on large networks where some sites failed to connect.

LoggerNet Server - Changed the PakBus/TCP server so that the max time on-line setting is ignored.

LoggerNet Server - Changed the parser for newer BMP5 datalogger table definitions so that, if only the table size has been changed, the new size is larger than the existing table.

LoggerNet Server - Overloaded the comm disabled handler for the BMP5 hangup delay operation as well as for the clock check/set operation in order to ensure that these operations are closed when communication becomes disabled.

LoggerNet Server - Added a new message that will be broadcast to all LgrNet session clients when a snapshot has been restored.

LoggerNet Server - Fixed a bug where the pakbus encryption key settings was not reported for any of the granite series loggers.

LoggerNet Server - Changed the way that IPv6 broadcasts are done when performing a UDP search. The behavior should match that of Device Configuration Utility.

LoggerNet Server - Changed the BMP5 implementation for the program file send transaction so that the program is not stopped when sending an OS to a CR300, CR6, CR1000X, GRANITE 9, GRANITE 6, or GRANITE 10 dataloggers.

LoggerNet Server - Changed the file synch so that the history now tracks when a file should be deleted but wasn't able to because of comm failures. This addresses a problem that was found on Mount Everest where the link was timing out before we had retrieved all of the files and none of the files that should have been deleted were ever deleted.

LoggerNet Server - Changed the file synch so that pending deletes take precedence over pending retrievals.

LoggerNet Server - Fixed a bug in the BMP5 set variable implementation that prevented the server from setting string variables that were declared with a size greater than or equal to 995. The implementation was producing a PakBus message that was unrouteable due to its size. The fix is to avoid attempting to fill all bytes of the variable with trailing nulls but to set the variable to the client specified value with at least one trailing null. If the result is too large, the transaction will be reported as a failure. Eventually, we will need to create a new transaction that can be used to transfer large objects for variable values.

LoggerNet Server - Removed the code that set the lastComPortId setting when handling an incoming socket for callback.

LoggerNet Server - Implemented the code that creates the new data file import collect area as well as settings to support that area type. Also implemented the code that parses data files and attempts to import their data into new or existing broker tables.

LoggerNet Server - Implemented support for the logger query EX transaction for BMP1, BMP3, and BMP5 (all table based) dataloggers.

LoggerNet Server - Fixed a bug in the LgrNet delete branch transaction where the incorrect outcome code was reported if the client specified an invalid device name.

LoggerNet Server - Fixed a bug that was introduced into the formatted data advise where the record number, file mark number, and time stamp were not being written to the notification message.

LoggerNet Server - Added code in the BMP5 implementation of the logger query ex transaction that will ensure that records are not repeated.

LoggerNet Server - Fixed a bug in the logger query ex transaction where the client specified station name was not applied.

LoggerNet Server - Changed the mechanism to track expected records within the logger query ex transaction.

LoggerNet Server - Fixed a bug in the BMP5 implementation of Logger Query EX that could result in collecting the entire table while collecting record range if the client's end record number was not in the table.

LoggerNet Server - Fixed a bug where received bytes from the cc proxy conn provider were not transmitted to the root level device. This only has impact on LoggerNet operating within the Campbell Cloud.

LoggerNet Server - Fixed a bug where the socket close method for the cc proxy conn provider got confused with the provider close method. As a result, the state of the provider was wrong when the connection to the proxy service was made.

LoggerNet Server - Fixed a bug in the default value of the CCProxyConnInfo setting where the datalogger IP address property was misnamed.

LoggerNet Server - Removed quotes from the timestamp pattern when formatting records for collected data.

LoggerNet Server - Added missing BMP3 implementation of the LoggerQueryEx transaction for linux.

LoggerNet Server - Fixed a bug in the LgrNet udp discover transaction where the serial number was being misreported as the OS version.

LoggerNet Server - Added code to print the table name in transaction log events that mark the receipt of records from logger query.

LoggerNet Server - Added code to ensure that the ranges of expected record numbers are ordered before sending the request to the datalogger. Also added code to clear the newest record if it happened to be reported by the datalogger.

LoggerNet Server - Changed the BMP5 implementation of logger query ex with the start-at-record option so that the calculated oldest record number for the table is used in place of the client's when the client's is determined not to be in the table.

LoggerNet Server - Changed the CCProxyConn device type so that it applies a five minute timeout while it is waiting for the proxy server to make a connection back to LoggerNet. It will advertise this interval in the connection request and also will advertise the current GMT epoch of when the timer was set.

LoggerNet Server - Added code to look for 'GRANITE9", "GRANITE10", and "GRANITE6" identifying strings in the terminal output when attempting to identify the protocol and model using terminal commands.

LoggerNet Server - Fixed a bug in the BMP5 implementation of logger query ex handling record fragments where the begin record number was not being specified for the p1 parameter.

LoggerNet Server - Added code in the CCProxyConn provider so that messages associated with listening for incoming connections from the loggernet proxy are logged in the communications log.

LoggerNet Server - Fixed a bug where the error handler for the CCProxyConn provider listener was not reporting any problems to the application.

LoggerNet Server - Changed the CCProxyConn device type so that it only binds to IPv4 interfaces while waiting for a connection from the proxy.

LoggerNet Server - Changed the CCProxyConn device so that it will look for a "failed" report from service-campbellsci-proxy as well as a "queued" message. Also added code that will set the watchdog timer after the connection request has been transmitted. This will allow us to work around the case where service-loggernet-proxy is not responding.

LoggerNet Server - Fixed a bug where the LoggerNet monitor view transaction would not fail if the client specified an invalid view ID.

Network Planner - Changed the devconfig device description class so that, rather than parsing the complete device description when constructed from a file, the "header" of the file will be scanned using the new event based XML parser. When the device description is needed to read settings, the file(s) will be reopened and parsed completely. This significantly reduces the amount of memory required for the settings library manager to load as well as the amount of time that is required to start up devconfig and related programs.

Network Planner - Added support for the CR300-RF407, CR310, and CR310-RF407 device types. These are variations on the CR300 with built in RF407 radios and/or Ethernet interfaces.

Network Planner - Added support for the CR300-RF412, CR300-RF422, CR310-RF412, and CR310-RF422 device types.

Network Planner - Changed the plug configuration for the CR300 RS-232 port from configurable to DCE.

Network Planner - Added support for the CRVW3-NE device type.

Network Planner - Fixed a bug in the RavenXT and LS300 device types where they were not allowing links to be forwarded for serial server stacks.

Network Planner - Added support for the CR6-RF407, CR6-RF412, and CR6-RF422 device types.

Network Planner - Added support for the CR310-WIFI and CR300-WIFI device types.

Network Planner - Added support for the CRVW3-RF407, CRVW3-RF412, and CRVW3-RF422 device types.

Network Planner - Fixed a bug where the baud rate for the U channels for the CR6 was not being configured along with other settings.

Network Planner - Added support for the CR1000X.

Network Planner - Fixed a bug where the NL240 did not support the new bridged stacks that indicated that the dataloggers should manage their own built-in interfaces rather than relying on the NL240 stack.

Network Planner - Added support for the NL241 device type.

Network Planner - Changed the default TCP port for cellular phone serial servers from 6785 to 3001 and added code to generate this setting when the Raven XT or LS300 modem type is configured.

Network Planner - Changed the way that settings are formatted in HTML by adding a new method to the Setting class that will append the appropriate elements to a supplied HTML element. Changed the ConfigSummary class to use this new method.

Network Planner - Changed the settings configuration comparison dialogue so that it will use the new method described above to format setting values in the HTML when their values differ.

Network Planner - Added code for CRVW channel properties to enforce the maximum string length for the channel engineering units.

Network Planner - Fixed a bug in the code that generates settings for the CRVW where the channel baseline frequency and channel baseline temperature were both written to the same component (baseline frequency).

Network Planner - Added code for a CRVW channel to ensure that the thermistor enabled property for a channel is read from the XML properties.

Network Planner - Changed the upper limit on the allowed units length for CRVW measurements from 14 to 15 characters.

Network Planner - Added code to allow configuration of channels 2 and 3 for the CRVW-RF407, CRVW-RF412, and CRVW-RF422.

Network Planner - Fixed a bug where the WIFI properties for an NL241 were not being saved.

Network Planner - Removed controls and code to generate settings for datalogger name servers. This was done to match work done in the devconfig deployment panels for various dataloggers that also removes name servers from the deployment panels.

Network Planner - Fixed bugs associated with adding a GRANITE 9 logger to the model and generating its configuration.

Network Planner - Added code to allow nested include files in device descriptions. This was needed in order to support the changes to the GRANITE 6 and CR6 device descriptions.

Network Planner - Changed the logic governing login management so that the login.xml file can now specify the maximum number of logins to manage and can also be locked to prevent the client from overwriting it.

Network Planner - Removed the code in create_summary() that was generating the digi radio protocol setting. This setting no longer exists in the device description and was causing an exception to be thrown when bringing up the configuration dialogue.

Network Planner - Replaced the CRVW3-NE with CRVW3-NE-RF451, CRVW3-NE-RF407, CRVW3-NE-RF412, and CRVW3-NE-RF422 device types.

Setup Screen - Added a last step for the manual backup and restore wizard process. On the last page of the restore process the LoggerNet Communications Enabled setting is now exposed just as it is on the LoggerNet settings dialog.

Setup Screen - Added the "Restore with network communications enabled" checkbox in the manual restore dialog to override the state of the "LoggerNet Communications Enabled" setting as it exists in the backup.

Setup Screen - Added the LoggerNet Communications Enabled setting to the LoggerNet settings dialog.

Setup Screen - Adjusted minimized screen updates when applying on large networks to increase performance.

Setup Screen - Modified code to increase the responsiveness when switching between subnets.

Setup Screen - Added the ability to allow PakBus TCP addresses to be edited in place in the grid. They can also be copied and pasted.

Setup Screen - Modified the formatting of IPv6 addresses with square brackets to make it easier to see when a port has been specified.

Setup Screen - EZSetup modified to now disabling the delete button when a logger is selected that is on an unsupported path.

Setup Screen - EZSetup modified to now allow devices to be deleted that are on paths where communications have been disabled.

Setup Screen - Modified the main form caption so it now indicates when we are working in standard view.

Short Cut - Added support for GRANITE 6, GRANITE 9, GRANITE 10, GRANITE TEMP 120, GRANITE VOLT 108, and GRANITE VOLT 116

Short Cut - CDM and GRANITE modules now show the user-defined “Module Name” throughout Short Cut, including on the corresponding module tab, measurement grids, wiring diagram, wiring text, summary, and so forth.

Short Cut - Added the following new or updated sensor files: SkyVUE8 Ceilometer,SkyVUEPro (rebranded CS135),GPS16X-HVS GPS Receiver (Added support for the CR6, CR1000X, GRANITE 6, GRANITE 9, and GRANITE 10 dataloggers.),LevelVUEB10 Water-Level Continuous Flow Bubbler,CS547A Conductivity and Temperature Probe (Added support for the CR6 and CR1000X),TS100SS Aspirated Radiation Shield,Type B, E, J, K, N, R, S, and T thermocouples on the GRANITE TEMP 120,TS100SS Aspirated Radiation Shield,CS241 (2-wire) Class A RTD Back of PV Module Temperature Sensor,CS241 (4-wire) Class A RTD Back of PV Module Temperature Sensor, [CAN] - CAN Port Configuration, - DBC Read Signal, - DBC Write Signal, - Generic Read Signal, - Generic Write Signal, [CAN FD] -CAN FD Port Configuration, - DBC Read FD Signal, - DBC Write FD Signal, - Generic Read FD Signal, - Generic Write FD Signal

Short Cut - Replaced SC115 with USB was only done for the GRANITE 6,9,10. Other loggers are unchanged.

Short Cut - Added a search (filter) to the DBC display form to help find the specific signal. Added a display of the number of signals.

Short Cut - Fixed a bug where a double click to edit was locking the cursor and tool tip in drag mode.

Short Cut - Fixed a bug where the table name was not displayed for TD loggers.

Short Cut - Fixed some issues when mapping the datalogger integration for use in a mux file. For example the CDM may use different integration than the datalogger.

Short Cut - !!Note!!: Beginning with this version of Short Cut, CDM modules are no longer supported for the CR1000, CR3000, and CR800 series. CDM modules are still supported for the CR6 series and CR1000X series. However, the way the modules are programmed in CRBasic is handled differently. Therefore, for existing Short Cut program files, the modules will need to be removed and then added again.

RTMC - Fixed an issue where the fill and clear of scope was creating an out of bounds scale condition.

RTMC - Added a check to prevent out of bounds values from locking the application up.

RTMC - Added a console log that allows users and support to have more info when a data failure occurs.

RTMC - Resolved an issue where the graph would not refresh in QuickReports upon completing its' data acquisition.

RTMC - Fixed an issue if the series was not available an OleException was thrown. This happens in an extremely rare circumstance.

RTMC - Modified the code to make sure that the table uri is persisted, for QuickReports, to make it available for the dialogs and also the error given if no data is available.

RTMC - Added PostgreSQL and Oracle types to be populated as datasources.

View Pro - Fixed a problem with reading binary files containing values stored using IEEE8B.

View Pro - Fixed an issue when indexing TOB2 and TOB3 files that was skipping records when encountering an empty frame footer.

View Pro - Added the missing IEEE8L data type.

View Pro - Modified the main window to open in the maximized state if it was in that state before it was closed.

View Pro - Fixed an issue where IEEE8 values were not being added to the graph for TOB files.

View Pro - Fixed and Error parsing files that contained commas within quotes.

Added support for the CR1000X datalogger.

CardConvert - Changed the filename sort function so that numbers sort correctly. This allows the Append option to keep the data in the correct order.

CardConvert - Made a change so when appending to the output file, that filename is not added to the view file list each time an input file is read.

Connect Screen - Added an indicator next to the station name that will appear when the station communication status is in a critical state.

Connect Screen - Added a check for Status table errors. The icon for the Station Status button will change to indicate that there are status table errors. After the user clicks on the button and opens the Station Status dialog, the button image will change back to normal.

Connect Screen - Fixed a problem with the erroneous creation of backup files.

Connect Screen - Fixed an issue where empty data files could be created, containing the header, but no records.

Connect Screen - Fixed an issue where the user could create an access violation by scrolling though the table list in the Table Monitor very fast.

Connect Screen - Fixed a bug in the Table Monitor where if the value for the status field LastSlowScan had a negative size for the first element, a range check error would be reported.

Connect Screen - Fixed an issue where multidimensional string arrays sometimes did not expand properly.

Connect Screen - Changed default behavior of the Show Units checkbox. It is now checked by default.

CoraScript - Added the defaultScheduleEnabledExpr setting to specify whether a new collect area should have its scheduleEnabled set to true

CoraScript - Added a new collect mode to the logger-query command that will allow the user to specify that the query should backfill relative to the newest record time stamp based upon an interval given in seconds.

CRBasic Editor - Added support for the "Double" type on variables. This includes highlighting and lists.

CRBasic Editor - Added a compile menu option for conditional compiling so that Include files are compiled into the code and displayed in a new window. This uses the -i command line instead of the -p option.

CRBasic Editor - Added a search box in the Instruction Panel.

CRBasic Editor - Fixed a range check error that could occur if you add a subroutine name and there was not already a name there.

CRBasic Editor - Modified the Editor to mark the menu item when the Display on Startup selection is made.

CRBasic Editor - Fixed a problem that was changing syntax highlighting when text was selected.

CRBasic Editor - Several changes were made to improve how .dld files are loaded. This also fixes a related timing bug where the Editor would load the last program used in front of a program that was opened by ShortCut.

CRBasic Editor - Fixed a problem finding the closing "}".

CRBasic Editor - Fixed a problem when using the F2 key that gave a range check error and unexpectedly launched the help.

CRBasic Editor - Modified the Editor to move the cursor to the end of the line when the comment continuation functionality is used.

CRBasic Editor - When a recent file does not exist, the error message will now indicate the file does not exist.

CRBasic Editor - The Editor is now forced to the foreground when you open a CRBasic file using Windows Explorer.

CRBasic Editor - Fixed #IF family of instructions. The # symbol and #IFDEF will now highlight properly

CRBasic Editor - Fixed an issue where the Find dialog would not be visible because it was displayed offscreen.

CRBasic Editor - Fixed an issue that prevented the Program Send dialog from retrying server connections.

CRBasic Editor - Increased the buffer space for paths.

CRBasic Editor - Changed all extensions on temporary files from '.xxx' to '.tmp'. The former can trigger a response from anti-virus software.

CRBasic Editor - Improved the error message when precompile does not run properly. Also improved it to use standard load if the compile result file will not load as UTF8. This helps when some Asian characters sets are used.

Device Configuration Utility - Added the ability to modify the CS240DM.

Device Configuration Utility - Added the ability to modify the CH201.

Device Configuration Utility - Added the ability to modify the CR300-CELL200 and CR310-CELL200 datalogger.

Device Configuration Utility - Added the ability to modify the CS475A radar level sensor.

Device Configuration Utility - Added the ability to modify the NL241 Wi-Fi network link interface.

Device Configuration Utility - Added a new “Data Collection” panel to allow downloading of data from dataloggers in the field.

Device Configuration Utility - Added USB drivers (RNDIS) for the CR6-series datalogger.

Device Configuration Utility - Added “Radio Enable” setting to the deployment panel for the CR6- and CR300-series dataloggers with internal radios.

LoggerNet Server - The underlying encryption library has changed from axTLS to mbedTLS.

LoggerNet Server - Added support for the new Device Collect Area Rename transaction. The server interface version has been incremented to 1.12.04 to report this.

LoggerNet Server - Added code to save and restore the reported station name for PakBus dataloggers. Also added code to clear the flag that indicates that we are polling for datalogger info when such an operation is closed down. This addresses an issue where the station name written to new data file headers was an empty string if the first attempt to get compile results after starting the server failed.

LoggerNet Server - Fixed a bug where the overloaded versions of on_callback_wait_end() were not called because the signature of the method was changed. This manifested itself as a problem handling call-back with a phone modem connection, where the connection was established and abandoned after a two-minute interval because the modem's callback ring timer was never cleared.

LoggerNet Server - Fixed a bug for BMP5 dataloggers where an access violation could occur when testing to see if a closing operation was a get compile results op.

LoggerNet Server - Changed the BMP5 file synch operation so the directory request will include a wild card if there is no given file specification. This addresses a problem with recent datalogger operating systems where the datalogger fails to enumerate the files if no colon or pattern was given.

LoggerNet Server - Changed the various error counters mapped from the status table to signed integers and set their default value to -1 to indicate that the value is unknown. Also set the process string for this to a value of "error_counter" in order for the status monitor to be able to apply special formatting for these that will leave negative values as blank.

LoggerNet Server - Changed the statistic that maps the datalogger lithium battery voltage so that this is initialized to a value of NaN and changed the process string of these to "battery_voltage" so that the status monitor can leave NaN values as blank and not be inclined to format these values with three fixed decimal digits.

LoggerNet Server - Added the ability to register string values in the statistics table and created a status table map for the CR300's new LithiumBattery value which gets reported as a string rather than a floating point voltage value.

LoggerNet Server - Changed the description for the CR300 "LithiumBattery" statistic to "Lith Batt Volt".

LoggerNet Server - Added support for the new defaultScheduleEnabledExpr setting for PakBus dataloggers.

LoggerNet Server - Added code to the challenge/responder component used for authenticating PakBus/TCP links with a PakBus/TCP password so the delayed start timer is shut down when invalid authentication data has been received from the datalogger before starting the challenge. Failure to do this was causing a crash when the delayed start event was processed and the authenticator was no longer in a state to do anything.

LoggerNet Server - Fixed a bug in the file synch poll operation where the client acknowledgement was sent after the polling process was notified. That order could result in the operation being deleted when trying to send the client acknowledgement and lead to an attempt to access released storage.

LoggerNet Server - Added code to the timed method for PakBus routers that periodically checks the validity of the current transaction focus so if there is no route available for that transaction, the transaction will be considered invalid, an error (unreachable) will be reported, and the current focus cleared.

LoggerNet Server - Implemented a new collect mode, backfill by interval, for the BMP5, BMP3, and BMP1 versions of the logger query transaction. The server interface version has been set to 1.12.06 to reflect this support.

LoggerNet Server - Changed code that was recently introduced in the PakBus router that will invalidate transactions if there is no router to carry them out so that this rule will not be applied to hello transactions.

LoggerNet Server - Changed the code that handles the case where the datalogger reports that the file is inaccessible or the name is invalid so that the file is removed from the get queue and is also removed from the files history. This will allow us to "rediscover" the file on a future poll if the file really is inaccessible. This addresses an issue where it would appear that the datalogger was removing the file between the time that we got the directory and the time we started asking for the file. In this case, the file name would get stuck in the get queue and we would ask for it over and over without giving up.

Network Planner - Added code for CRVW channel properties to enforce the maximum string length for the channel engineering units.

Network Planner - Fixed a bug in the code that generated settings for the CRVW where the channel baseline frequency and channel baseline temperature were both written to the same component (baseline frequency).

Network Planner - Added code for a CRVW channel to ensure that the thermistor enabled property for a channel is read from the XML properties.

RTMC - Updated the mbedTLS framework to the latest version 2.5.1.

RTMC - Fixed an issue where data alarms were never reporting an alarm if they had never received data .

RTMC - Fixed an issue with a published project that uses the subtraction operand.

RTMC - Fixed an issue with precision not being honored with arrays.

RTMC - Added an option to disable web sockets in the publisher. Web sockets will be enabled by default and can be configured for each website.

RTMC - Added the EmailRelay option to email profiles. This new option allows the user to send emails though Campbell Scientific’s EmailRelay service.

RTMC - Fixed and issue where some images were being abandoned on the disk in the temp directory. Animated images are now copied to a temp location and then loaded. This allows animated images from a URL to be loaded as well as animated images to be overwritten. We now try the TEMP directory, then the TMP directory, and if those aren't defined in the environment, then we create an image_cache folder in the RTMC working directory.

RTMC - Added a new Julian Date option to FormatTime. The option is specified by using a %J. The software now allows %J for Julian Date and %j for specifying Julian Day.

RTMC - Fixed an error with the CS110 where sounds were overlapping with each other.

RTMC - Fixed an issue where Boolean values were always displayed as False.

RTMC - Fixed an issue where a zero-length string caused labels to overlap.

RTMC - Fixed an issue when setting a negative value to the scale max in RTMC standard.

RTMC - Fixed an issue where a series that was marked as hidden and then published broke the resulting project.

RTMC - Fixed an issue where null components could be reported when accessing the ownerComponent of a web query.

Short Cut - Redesigned the user experience and GUI interface.

Short Cut - Fixed when Alias is called on an existing array. It now updates the index along with the name. When searching for the Alias associated with a CRBasic array element, now does not return the Alias (name, object, or units) if the Alias is disabled.

Short Cut - Modified the program to prevent ground wires from being moved from G terminal to Ground terminal and prevent Ground wires from being moved to G terminal. With preferred grounds, all grounds are in a common group.

Short Cut - Fixed an issue where the input location ID was showing up for CRBasic type of dataloggers in the summary for labels created by used defined expressions.

Short Cut - Added a custom check to look for and prevent SDI-12 and Pulse channels on channel pairs for the CR6. Also on the control ports for the CR1000X. These are not allowed but are outside the normal rules for channel pairs .

Short Cut - Modified to allow multiple decimal chars when editing a string field (like an IP address).

Short Cut - Enhanced to allow manual setting of high resolution for long data type.

Short Cut - Added new functionality: when loading a saved program, add any new channel types that are found in the DLF file. For example, switchclosure channels were added to the CR6. This was needed as we learned that switch closure connections on control ports are different than on U terminals (U terminal switch to ground and C port switch to 5V). So a new switchclosure channel type was added, and the C ports were removed from the pulse channel type. Caveats: Using the C ports requires a U port to be configured as a 5V source, as the CR6 has no 5V terminal. Since the C ports are only used when the U terminals are full, the user probably will not have one available. Also, when a saved program is loaded, the old pulse channel definitions are still used, so they will continue to be allocated and will not work. This will not be addressed as it is very unlikely to occur. The work-around is to start a new Short Cut program. We also added a new channel type of SDI-12 to the CRx000 and CR10X family of loggers. This is so the data connection could be moved instead of being on a fixed port. This required updated sensor files and datalogger files. This will allow updated datalogger and sensor files to work with new channel types.

Short Cut - Fixed an issue when making the working directory save work.

Short Cut - Modified the set buffer parameter of Scan instruction for some dataloggers with sub-second scans.

Short Cut - Fixed RepBlockArray aliases to have the current units if the user has edited the units since an alias was created.

Short Cut - Fixed server login. Login will not be reattempted multiple times, only when the program is sent from Short Cut.

Short Cut - Increased the font size by 2 for the wiring diagram visual and text display.

Status Monitor - Added support for string status field values, specifically the Lithium battery status in CR300 series dataloggers.

Short Cut Bug Fix - Fixed a problem for the CR300-series datalogger where 12V power ground was shown wired to a signal ground (the ground symbol) instead of a power ground (G) terminal. This could affect single-ended measurements, if current flowing on the return was large enough.

Short Cut Bug Fix - Changed ground connection for several SDI-12 sensors to allow the signal wire to be moved.

Short Cut Bug Fix - Fixed a problem where bridge strain measurements on multiplexers (for example, the AM16/32) had the excitation voltage set to zero.

DevConfig Enhancement - Updated CR300 series support including the new CR310 with the various radio and WIFI versions for the CR300 and CR310.

DevConfig Enhancement - Added additional radio options for the CR6.

DevConfig Enhancement - Added SR50A OS download support.

DevConfig Enhancement - Made numerous device setting changes, cosmetic improvements, and some new capabilities and optimizations.

Toolbar Bug Fix - Fixed an issue with a hard-coded file path of C:\Campbellsci. With certain video settings, the toolbar would sometimes create files in this directory. This would cause the toolbar to fail, if LoggerNet was installed on a different drive such as the D:\ drive.

Setup Screen Bug Fix - Fixed a problem where the Setup Screen would be slow to start after launch from toolbar.

Setup Screen Bug Fix - File Retrieval Tab: Fixed an issue where if a datalogger file was successfully retrieved but could not be stored in the specified location (i.e. network drive) and the file was marked for deletion after retrieval, the file would be deleted from the datalogger but not stored on unavailable drive.

Connect Screen Bug Fix - Fixed a problem where occasionally array elements were not displayed correctly and incorrect values would be shown.

Connect Screen Bug Fix - Fixed an issue where you could not send a NAN value to a datalogger.

Short Cut Enhancement - Added sensor file support for the optional FillNaN parameter in an SDI-12 measurement for dataloggers that support it.

Short Cut Bug Fix - Fixed a bug where a compile could fail if extended (non-ASCII) characters were in the file path.

Short Cut Bug Fix - Improved manual moving of wires for some sensors.

CRBasic Editor Bug Fix - Fixed a bug where a compile could fail if extended (non-ASCII) characters were in the file path.

RTMC Enhancement - Warning icons are now suspended for 10 seconds to allow normal data flow to occur without reporting an error.

RTMC Enhancement - Changed the library used for the TLS stack from axTLS to mbedTLS.

RTMC Bug Fix - Fixed renaming issue reported with some components.

View Pro Bug Fix - Fixed a bug where Histogram, FFT, and Rainflow data could fail when graphed.

LoggerNet Server Bug Fix - Fixed an issue where if a datalogger file was successfully retrieved but could not be stored in the specified location (i.e. network drive) and the file was marked for deletion after retrieval, the file would be deleted from the datalogger but not stored on unavailable drive.

Setup Screen Enhancement - Added support for CR300 Series dataloggers.

Setup Screen Enhancement - Added the UDP Search dialog, which is accessible by the UDP Search button next to the IP Port field on the IPPort hardware tab.

Setup Screen Enhancement - Added the "Install USB Driver..." button to the com port tab. This button now opens the new Install USB Driver dialog which uses the list of drivers available to install from DevConfig giving the user the ability to select and install a driver from the Setup Screen.

Connect Screen Enhancement - Added support for CR300 Series dataloggers.

Connect Screen Bug Fix - Fixed a problem where the Connect button would have its event called after the user manually set the time of the clock.

Connect Screen Bug Fix - Changed how the parent window got assigned for the options dialog of the data displays. This fixed a problem where the options dialog box could disappear.

Connect Screen Bug Fix - Fixed a problem displaying three dimensional character arrays that could lead to variables not updating in the Table Monitor.

Connect Screen Bug Fix - Removed the meta data from the bytes used to calculate the progress and speed of a custom collection.

Connect Screen Bug Fix - Changed the attempt to get the compile results to wait until after the table definitions are finished updating. This prevents a problem where the attempt to get them fails due to the status table being deleted for the CR3000.

Connect Screen Bug Fix - Fixed a problem where certain types of arrays were not being expanded properly.

Connect Screen Bug Fix - Now ignoring the clock check failure due to communications becoming disabled. This prevents the Connect screen from going to the disconnected state when the user sends a program to the station behind its back.

Connect Screen Bug Fix - Fixed a bug where the run options would be applied even if the option was disabled.

Connect Screen Bug Fix - Fixed a bug where the tally of expected records was not being calculated properly.

Connect Screen Bug Fix - Added a check and indicator to inform the user when not all of the expected records have been collected.

Connect Screen Bug Fix - Fixed a problem with alarm sound.

Task Master Enhancement - Forced an update of all of the tasks when the user goes to the status tab.

Task Master Enhancement - Added a warning to the user if they set up a task that does not do anything.

Task Master Bug Fix - Prevented the user from being able to go to the status tab if there are changes pending.

Task Master Bug Fix - Fixed the enabled state of the controls when the server crashes.

Short Cut Enhancement - Added support for the CR300 Series dataloggers, CDM-A108, and CDM-A116.

Short Cut Enhancement - Added new or updated sensor files for 05108-45 Wind Speed & Direction Sensor, CS512 Dissolved Oxygen Probe (a CSL version, there was already a CSI version), LI190R Quantum Sensor, LI200R Pyranometer, LI200RX Pyranometer, WXT520 Weather Transmitter, Sunshine Hours (for CRBasic dataloggers, Edlog dataloggers already had it).

CRBasic Editor Enhancement - Added support for the CR300.

CRBasic Editor Enhancement - Added ability to display line numbers.

CRBasic Editor Enhancement - Added a new start page that by default is displayed when the CRBasic Editor is opened.

CRBasic Editor Enhancement - Added support for the -u precompiler command line option which checks for unused variables and subroutines.

CRBasic Editor Enhancement - Made some changes that allow a DLD file to be automatically associated with a datalogger extension on open. CRBasic determines the datalogger extension based on the "meta" information found on the first line of the program.

CRBasic Editor Enhancement - Made several improvements to the Print and PrintLines functions in terms of efficiency, error handling, and handling of line numbers.

CRBasic Editor Enhancement - Added a checkbox in the Font selection dialog that allows the user to filter monospaced fonts.

CRBasic Editor Bug Fix - Fixed a problem where an instruction on the same line as an if statement would not work properly with the right click menu to edit instruction.

CRBasic Editor Bug Fix - Fixed a bug so that opening files with bookmarks does not 'modify' the program and thus prompt for a save if nothing else is changed.

CRBasic Editor Bug Fix - Added code that allows us to force an insert instead of an overwrite in certain cases (e.g., the tab key is pressed in overwrite mode). This behavior is consistent with other mainstream editors.

CRBasic Editor Bug Fix - Fixed an issue where an Undo would not restore characters that had been overwritten.

CRBasic Editor Bug Fix - Limited menu item captions of functions/subroutines to 120 characters.

CRBasic Editor Bug Fix - Reworked Find/Replace/Replace All code to solve problems with "match whole word only".

CRBasic Editor Bug Fix - Fixed some Replace Variable (F10) and picklist issues that affected single and multi-line instructions.

CRBasic Editor Bug Fix - Major line parsing and instruction parsing changes/improvements.

CRBasic Editor Bug Fix - Fixed and issue in the instruction dialog, where pressing the Next button did not always detect and skip lines with comments or lines that contained only whitespace.

RTMC Bug Fix - Changed the javascript ValueAtTime() function so that, if no values are removed but the range of values timestamps is greater than or equal to specified range, the first value will be returned.

RTMC Bug Fix - Changed the code that calculates the zero point for bar charts so that a very small value (1E-38) is used rather than zero in order to work with logarithmic plots.

RTMC Bug Fix - Added code to that which generates labels and the scale so that, if the scale is logarithmic, the min and max values are rounded while being assigned to the converted log values. Failure to do this was causing small errors to creep in for base 10 logs that could result in expected labels not appearing.

RTMC Bug Fix - Changed the AvgRunOverTimeWithReset(), MaxEunOverTimeWithReset(), MinRunOverTimeWithReset(), and TotalOverTimeWithReset() functions so that the current time is adjusted back rather than adjusting back the last time. This addresses a customer reported problem where the total was resetting one interval sooner than expected.

Network Planner Enhancement - Added support for the CR300, RF451, CR6-WIFI, CR6-RF451, RavenXTV, LS300G, RF407, RF412, and RF422.

Network Planner Enhancement - Added support for using the RS232 port on the CR6 CPI connector.

Network Planner Enhancement - Added a search control to the device palette.

Network Planner Enhancement - Added code that will provide a button in the property sheet shown by the LoggerNet device type for USB serial ports that will allow the user to install the USB driver for the associated slave device.

Network Planner Enhancement - Eliminated the RF450 Network "Use Repeater Frequency" property and now automatically generate this setting based upon the network topology.

Network Planner Enhancement - Changed the code that generates settings for the CRVW and RF450/RF451 so that these settings are properly generated.

Network Planner Bug Fix - Changed the way that bridged TCP connections work with the CR1000, CR3000, and CR800 dataloggers. Rather than having the bridged TCP link going through the NL200 or NL240, the link will now come from the datalogger's IP stack using a new IP interface (this is the way that the CR6 already does this).

Network Planner Bug Fix - Fixed a bug where attempting to generate settings for a CR800 with a bridged NL2xx device was causing an exception to be thrown.

Network Planner Bug Fix - Fixed a bug in the code that generates settings for the RF401A where the active interface was not set to USB if that was the interface selected.

Network Planner Bug Fix - Fixed a bug where the wifi configuration generation for the NL240 was being stored as a string but, instead of using the choice values, the choice names were being stored.

Device Configuration Utility Enhancement - Added support for the CR300, A100, RF451, CR6-WIFI, CR6-RF451, RF407, SDM-SIO1A, SDM-SIO4A, SoilProf3, TX321, and CDM-A100 Series.

Device Configuration Utility Enhancement - Changed the settings editor panel so that a search control is used to help locate settings rather than the combo box previously used.

Device Configuration Utility Enhancement - Changed the datalogger restore wizard by adding a page that will allow the user to select the files that will be restored.

Device Configuration Utility Enhancement - Added a search control immediately above the device types list. This control will allow the user to restrict the devices shown to those whose description matches a subset of what the user typed.

Device Configuration Utility Enhancement - Added support for a fixed 76800 baud rate on all CR1000, CR8xx, CR3000, and CR6 serial ports.

Device Configuration Utility Bug Fix - Fixed a bug in the constants customization panel where, if the configuration had more than one file and a program file had no constants but it still needed to be saved, DevConfig would attempt to compile the program while it was still trying to save the other files.

Device Configuration Utility Bug Fix - Fixed a bug in the serial number view for the CD295 where the apply button had no effect because of the code that checked for needing to commit did not recognize when the serial number had changed.

Device Configuration Utility Bug Fix - Fixed a problem where the SC115 device description called for the wrong name for the sc115_msd driver resulting in this driver not being signed.

CoraScript Enhancement - Added support for the CR300

CoraScript Enhancement - Added options to the connect command to connect via a messaging proxy.

CoraScript Enhancement - Added a new command, udp-discover, that can be used to have the LoggerNet server scan its local area network for TCP based devices.

CoraScript Enhancement - Changed the get-task-setting, list-task-settings, set-task-setting, set-task-settings, trigger-task, and remove-task commands so that the user can now specify the name of the task or, optionally, the task identifier. This will allow the scripting of being able to add and configure tasks.

CoraScript Enhancement - Added a new value, at-most-interval, to the tableCollectMode collect area setting as well as a new collect area setting, tableMaxIntervalToPoll, that will specify a maximum time interval to poll.

CoraScript Enhancement - Added a command, validate-snapshot, that can be used to validate a snapshot file without having to send it to the LoggerNet server.

CoraScript Bug Fix - Fixed a bug where the values specified for a uint4 set were not being parsed.

Server Enhancement - Added support for the CR300.

Server Enhancement - Changed the BMP5 set variable operation so that it can handle double data types.

Server Enhancement - Added support for the new LgrNet UDP Discover transaction.

Server Enhancement - Changed the connection rules so that a generic modem can be created as a child to a pooled serial port or a pooled terminal server device.

Server Enhancement - Added support for a new value for the tableCollectMode collect area setting that will allow the client to specify that a limited set of records should be selected based upon a time interval relative to the newest record. This collect mode is only supported for some BMP5 dataloggers (not the CR200) and BMP1 dataloggers.

Server Enhancement - Changed security policy so that security can be enabled when the server is configured for standard LoggerNet. In this mode, only one account can be added and security will not be enforced for local connections.

Server Bug Fix - Fixed a problem in the base class for classic datalogger commands where, if the command failed because of an invalid echo and the server immediately started on another command (say an failed "F" command followed by a "G" command), there server would make no attempt to resynchronize the link with the datalogger. This would end up sending the characters for the subsequent command as if they were a part of the preceding command.

Server Bug Fix - Fixed a bug in the interpretation of the classic logger ports byte reported through the K command where the code was using a multiply operator rather than a mask operator when picking out the value for the fourth port. The result of this error was that the fourth port would be reported high if any other port was high.

Server Bug Fix - Fixed a bug where a data broker could attempt to mount two tables with the same name and, when this happened, one table status would be marked as needing to mount. This was caused by a bug in the unicode string comparison function where, if doing a case insensitive comparison, the conversion to upper case would silently fail for non-ascii characters.

Server Bug Fix - Fixed a bug where the post_kill_event() method for classic datalogger commands where the notification could be posted multiple times for the same failure. A flag is now used to track whether the event has already been posted. This addresses a problem reported by a customer using an RF-MD9-classic logger link where multiple fault messages were posted for the same failed command. This led to inflation of the error rate and a corresponding decrease in packet size.

Server Bug Fix - Fixed a bug, introduced in LN 4.3, where retries were no longer enabled for the classic datalogger position modem pointer (G) command.

Server Bug Fix - Added code in the BMP5 file synch operation to use a colon to separate the file spec from the drive when it is specified when requesting a directory from the datalogger. This addresses a problem where the datalogger was returning an empty file set when the drive and file name pattern were both specified.

Server Bug Fix - Added code to ensure that the comms provider objet is not accessed without first checking its validity. This may address a problem that a customer is experiencing with crashing the LN Linux server while user serial port pools.

Server Bug Fix - Added code to the exception handler for the code that posts a message when bytes have been read so that the flag is set that will allow future posts if the post fails. This code will now post a message to the object state log. This may address a problem that a customer has encountered while using modem pools on LN/Linux.

Server Bug Fix - Added code to ensure that the flag that prevents sending redundant bytes received posts gets cleared after one second of inactivity and also gets cleared when the port is opened.

Server Bug Fix - Removed code that was posting object state log messages from the root level provider thread. This could lead to corruption in the log queue.

Server Bug Fix - Changed the Posix implementation of the TCP socket so that, when bytes are written to the socket, the MSG_NOSIGNAL flag is specified to keep the sockets layer from crashing the application with an unwanted signal.

Server Bug Fix - Fixed a bug where the overloads in BMP1 and BMP5 table collect areas for the report_hole_added() method no longer had the right signature. The result of this was that the station wouldn't check to see if it needed to collect holes when those holes were detected. This addresses a problem reported by a customer where hole collection was only happening every other time that one way data was received.

Server Bug Fix - Changed the BMP5 implementation of the hole collect operation so that, if the response sent by the datalogger is outside the range expected by the computer, all pending holes will be considered lost and no new holes will be added. Previously, the server was assuming that the entire table could be collected as hole and the end result was that the server could get stuck in a loop where the same records were being collected over and over.

Server Bug Fix - Changed the automated BMP5 hole collection operation so that it will only operate on non-cloned areas. This addresses a bug where hole collection was taking place on a cloned area (set up by the connect screen table monitor) when one way data came in.

Server Bug Fix - Fixed as bug where records using an older table definition could get added to the record cache (used to prevent excess allocation of records). Found this while testing file control immediately followed by a get program stats for a BMP3 datalogger. The result was that the get program stats would fail with a communication error due to an unhandled exception thrown when the native record was copied to a cached record.

Server Bug Fix - Changed the advise cursor for collected order so that, if the start option indicates a relative to newest time stamp or start at date, matching blocks of newer records will be considered even if their time is farther away than other blocks. This addresses a problem found with an XTD table that was filled using data advise. If an advise cursor was started with a backfill and newer matching records were logged before an older block of holes was collected, the newer records would be omitted from the set reported by the cursor. This also affected cloned tables since these also used collected order.

Server Bug Fix - Updated the Debian init scripts for the LNLinux daemons.

Requirement - The .Net 4.0 framework (full profile) is required for this application to run in its entirety. The .Net 4.5 framework may also be installed on the system as it is an upgrade to the 4.0 .Net framework and will allow the application to run in its entirety.

Setup Screen – Standard View Enhancement - Added support for CR6 Series dataloggers.

Setup Screen – Standard View Enhancement - Added support for CRS451 Series Water Level Recording Sensors.

Setup Screen – Standard View Enhancement - Added support for CRVW Series Vibrating Wire Recording Interfaces.

Setup Screen – Standard View Bug Fix - USB Serial port changes are now detected and associated lists are updated.

Setup Screen – Standard View Bug Fix - Associating a *.TDF file will no longer leave the network locked.

Setup Screen – EZ View Enhancement - Added support for CR6 Series dataloggers.

Setup Screen – EZ View Enhancement - Added support for CRS451 Series Water Level Recording Sensors.

Setup Screen – EZ View Enhancement - Added support for CRVW Series Vibrating Wire Recording Interfaces.

Connect Screen Enhancement - Added support for CR6 Series dataloggers.

Connect Screen Enhancement - Added support for CRS451 Series Water Level Recording Sensors.

Connect Screen Enhancement - Added support for CRVW Series Vibrating Wire Recording Interfaces.

Connect Screen Enhancement - Added support for dragging and dropping files from Windows Explorer onto the File Control dialog.

Connect Screen Enhancement - Added support for modifying Station Status

Status Table values via the double click.

Connect Screen Enhancement - Added the ability to hide and show the controls on the data displays.

Connect Screen Bug - Fixed a bug where the wrong OS was being reported after sending a program to a datalogger.

Connect Screen Bug - Adjusted the graph so that it will scroll immediately after the user narrows the width.

Task Master Bug - Fixed a problem where the escape key was erasing entries.

Short Cut Enhancements - Added support for CR6 Series dataloggers.

Short Cut Enhancements - Added new or updated sensor files for the Switched 12 Volt Timed Control, CS475/CS476/CS477 Radar Water Level Sensor, GPS16X-HVS GPS Receiver, CS140 Luminance Sensor, CS120 Visibility Sensor, PWS100 Present Weather Sensor, CS125 Present Weather and Visibility Sensor, CS135 Ceilometer, Jewell Instruments 904-T Clinometer Pak, DGSI Vibrating Wire Strain Gage, DGSI Vibrating Wire Piezometer, Generic Thermistor (CR6), CS11 Current Transformer, CS11 Current Transformer with Potential Transformer.

CRBasic Editor Enhancement - Added support for CR6 Series dataloggers.

CRBasic Editor Enhancement - Added support for optional parameters (for instructions that have them) in parameter dialog box.

CRBasic Editor Enhancement - Added ability to copy compile results to clipboard.

CRBasic Editor Bug Fix - Fixed a problem with the Undo list using up a large amount of memory.

RTMC Enhancement - Added RESET_WEEKLY and RESET_CUSTOM options for functions with state that reset. RESET_CUSTOM allows for an optional expression to control the state of when the function will reset.

View Pro Bug Fix - Fixed FSL file loading and a range check error in the Array Definitions dialog.

Device Configuration Utility Enhancement - Added support for the CR6 Series, CRS451, CRVW, VSC100, CS125, CS140, RavenXT, RF401A, LS300,CSAT3B.

Device Configuration Utility Enhancement - Added wizards to back up a datalogger's settings and files to a zip file and to restore these from a zip file.

Device Configuration Utility Enhancement - Added a data recovery wizard.

Device Configuration Utility Enhancement - Updated support for the CRX000 dataloggers, AL200, CC5MPX.

Device Configuration Utility Enhancement - Added a context menu option to the terminal emulator that will allow the user to toggle whether new lines are time stamped as they are added.

Device Configuration Utility Enhancement - Changed the file control panel so that, if the user attempts to send an operating system to the datalogger, an operation will be included that will start that operating system using the file control transaction.

Device Configuration Utility Bug Fix - The AL200 Slot Offset setting will now be interpreted as an unsigned four byte integer rather than as an unsigned two byte integer.

Device Configuration Utility Bug Fix - Fixed a bug in the settings editor panel where a poll attempt could take place after a session failure. This could lead to a crash due to an unhandled exception.

Device Configuration Utility Bug Fix - Made the code that checks the length of the telnet password conditional on that setting being reported. This addresses an issue where a special version of the OS didn't support the deployment panel.

Device Configuration Utility Bug Fix - Added code in the handler for command completion that will check to make sure that the transaction queue is not empty before handling the command outcome. This addresses a bug that could lead to a crash when power was pulled on the TX320 while polling transactions were under way.

Device Configuration Utility Bug Fix - Fixed a bug where the NL2xx deployment panel was attempting to unconditionally poll the IPv6 address regardless of whether the device reported the setting. This could lead to an unhandled exception when connecting to an NL200 with an older OS.

Device Configuration Utility Bug Fix - Added code to stop automatic updates of settings such as IPv6 status when settings are changed in the NL2xx deployment panel.

Device Configuration Utility Bug Fix - Fixed a bug where the settings manager component was returning true to the query of whether settings needed to be committed when there was a cancel or commit operation under way. The result was that DevConfig would post a modal dialogue confirming close if the user tried to close the application while a cancel or commit operation was under way and could result in an unhandled exception.

Device Configuration Utility Bug Fix - Fixed a bug in the RF430 deployment where, when settings were loaded from the radio, the radio address control was initialized with the value of the network address.

CoraScript Enhancement - Added support for the CRVW and CRS500 device types in the various commands that deal with device type.

CoraScript Enhancement - Added a "pattern" option to the list-files command.

CoraScript Enhancement - Added support for a new task setting, ftp-enable-epsv, that will control whether the EPSV command should be enabled when the task is sending a file using FTP.

CoraScript Bug Fix - Fixed a bug that caused ReadConsole() to fail on windows 8.0 and windows 8.1. This prevented the program working on these operating systems while reading the console device.

Server Enhancement - Added support for the CRVW and CRS500 datalogger types.

Server Enhancement - Added code in the serial port thread so that, if the simplified I/O is enabled, the thread will use a timer that will get reset whenever data is transmitted or received. If this timer expires, the thread will call SetCommState() in an attempt to force communication over a USB serial port in order to test if the driver connection is still valid.

Server Enhancement - Added support for an optional parameter to the device files enumerate command message that will allow the client to specify a pattern that will be used by BMP5 dataloggers to restrict the set of files that are reported.

Server Enhancement - Implemented the device force link off line transaction.

Server Enhancement - Added support for a new task setting, ftpEnableEpsv, that will control whether the task will allow the EPSV command to be used when sending a file using FTP.

Server Enhancement - Changed the BMP5 implementation of the device set variable transaction so that it recognizes when the datalogger sends the response code indicating that it needs to reboot. The server will now shut down the link and wait for the specified amount of time before reporting the outcome and launching the poll.

Server Enhancement - Added a new coralib function, cora_on_device_change(), that can be called to inform the server that a potential device remove device has been detected. Added code in the serial port class and its associated provider that will conduct a test to determine whether the serial port handle is still valid as a result of that method. Doing this gives the server a chance to detect USB serial port failures more reliably.

Server Bug Fix - Changed the BMP1 operation/transaction relation so that the on_message_being_sent() operation method has the ability to prevent the message from being sent by its return value. This should prevent the BMP5 tunnel carrier operation from sending an empty message when the router has nothing to send.

Server Bug Fix - Fixed a bug in the code that registers a static route where we could use the wrong address to access the child list under certain configurations. This resulted in an unhandled exception that forced the server to reset.

Server Bug Fix - Added an optional flag to the device startUp() method so that setting changed flags will be cleared only if that flag is set. Changed the rename and move network map modifiers so that this flag is not set when the newly renamed or moved devices are started. This will allow any pending changes to be written when the device configuration is written.

Known Issues - RTMC will not function properly if the TeeChart control is newer than: TeeChart2011.0.0.5ActiveX.exe, January 12, 2012, Build 2011.0.0.5, File size - 30.86 MB. Therefore, if you install another application that overwrites this control with a newer version, you will see issues in RTMC. Re-installing LoggerNet will fix the problem.

Known Issues - Mapped network drives cannot be used when LoggerNet is running as a service. This is caused by a Windows update that disallows the use of mapped network drives when running as a service for security reasons. To use network drives when running LoggerNet as a service, you must use the full UNC path (e.g., computer_namedirectory ilename). Note that the ability to write to the network drives will be governed by Windows security. It will be necessary to configure the LoggerNet service to run under an account that has network privileges. This requires changes to the properties of the LoggerNet service in Windows. Contact your network administrator for assistance.

Known Issues - When using LogTool to zip all log files and certain file errors occur, the operation may still be reported as successful. For example, If LoggerNet is running as a service and an attempt is made zip all log files and store them in the root directory of a mapped network drive, a failure will probably occur as the service cannot access mapped drives but the operation is reported as successful.

Known Issues - The following LNDB issue affects View Pro and RTMC Pro when using an LNDB database: If LNDB has been running with a SQL Server 2005 database, the timestamps in the tables will be of type DateTime. If you then upgrade to SQL Server 2008 the DateTime data type for the timestamps is carried over to the 2008 database. However, LNDB expects the timestamps to be of type DateTime2 which has a higher precision than DateTime. This type mismatch causes queries to fail. In order to fix this issue, you will need to use the SQL Server management tools to change the data type for the timestamp columns to DateTime2.

Toolbar Enhancement - Added an "Allow IPv6 Connections" check box to the Tools

Options dialog box. By default, IPv6 connections are not allowed. (Enabling IPv6 may cause problems if IPv6 is not fully functional in a network. The main issue is that clients cannot connect to the server.)

Setup Screen Standard View Bug Fix - Fixed a bug in scheduled backups where the default value for number of files was set to zero. A value of zero causes all of the backup files to be retained. The default value has been changed back to 5.

Task Master Bug Fix - Fixed a bug where data collection triggered by a task did not trigger any subsequent collection related tasks on the station collected from.

Task Master Bug Fix - Fixed multiple issues with renaming of tasks and illegal naming of tasks.

Task Master Bug Fix - Fixed a bug where tasks triggered by "After Any Call", "After Successful Call" and other triggers were being triggered by data displays in the Connect screen.

Task Master Bug Fix - Fixed a bug where "Pending Actions" was not showing queued execution of a program.

RTMC Bug Fix - Fixed a bug where touch events on mobile devices weren't working properly.

RTMC Bug Fix - Fixed a bug where an alarm did not function, if it was grouped with other components.

RTMC Bug Fix - Fixed an issue where the pipe wasn't displayed properly after switching tabs if pointed at a boolean value because it is reported as -1 and the test was looking for > 0 instead of != 0

RTMC Bug Fix - Fixed an issue with publishing a project when the screen name has a symbol in it.

RTMC Bug Fix - Fixed an issue where fixed size screen dimensions weren't being honored.

RTMC Bug Fix - Fixed a directory traversal security issue in CSI Web Server.

Device Configuration Utility Bug Fix - Fixed a bug where DevConfig could not read a NL240 config file created with an older NL240 OS.

Server Bug Fix - Fixed a bug where tasks that were triggered by any poll, and failed poll, and failed poll with data, and poll with data, and etc. failed to recognize when a poll attempt took place because it was triggered by another task.

Server Bug Fix - Fixed a bug in the task poll station action where, if the polling process had to do specials (such as doing file retrieval), the task would never get reported as complete.

Server Bug Fix - Fixed a bug where changing the PC clock backwards caused scheduled collection, scheduled tasks, and scheduled backups to trigger immediately. Now the schedules' next time is recalculated only if the difference between the system time and the last time checked is greater than five minutes. This will make the LoggerNet server less sensitive to possible minor changes when the computer clock is updated.

Known Issues - RTMC will not function properly if the TeeChart control is newer than: TeeChart2011.0.0.5ActiveX.exe, January 12, 2012, Build 2011.0.0.5, File size - 30.86 MB, Therefore, if you install another application that overwrites this control with a newer version, you will see issues in RTMC. Re-installing LoggerNet will fix the problem.

Known Issues - Mapped network drives cannot be used when LoggerNet is running as a service. This is caused by a Windows update that disallows the use of mapped network drives when running as a service for security reasons. To use network drives when running LoggerNet as a service, you must use the full UNC path (e.g., computer_namedirectory ilename). Note that the ability to write to the network drives will be governed by Windows security. It will be necessary to configure the LoggerNet service to run under an account that has network privileges. This requires changes to the properties of the LoggerNet service in Windows. Contact your network administrator for assistance.

Known Issues - When using LogTool to zip all log files and certain file errors occur, the operation may still be reported as successful. For example, If LoggerNet is running as a service and an attempt is made zip all log files and store them in the root directory of a mapped network drive, a failure will probably occur as the service cannot access mapped drives but the operation is reported as successful.

Known Issues - The following LNDB issue affects View Pro and RTMC Pro when using an LNDB database: If LNDB has been running with a SQL Server 2005 database, the timestamps in the tables will be of type DateTime. If you then upgrade to SQL Server 2008 the DateTime data type for the timestamps is carried over to the 2008 database. However, LNDB expects the timestamps to be of type DateTime2 which has a higher precision than DateTime. This type mismatch causes queries to fail. In order to fix this issue, you will need to use the SQL Server management tools to change the data type for the timestamp columns to DateTime2.

Toolbar Bug Fix - Fixed a bug where hidden clients (Setup, Connect, Troubleshooter, etc.) would not restore when launched from a minimized iconized toolbar.

Toolbar Bug Fix - Fixed a bug where the toolbar taskbar icon was not staying hidden when it was launched minimized.

Toolbar Bug Fix - Clients are also minimized if LoggerNet is run with the /M command switch.

Setup Screen – Standard View - Enhancements - Added the ability to configure subnets and groups of your network.

Setup Screen – Standard View - Enhancements - Added two new root devices, SerialPortPool and TerminalServerPool, for use with modem pooling.

Setup Screen – Standard View - Enhancements - Added a new setting, Computer Poll Interval, to the RFBase-TD.

Setup Screen – Standard View - Enhancements - Added a new "Midnight is 2400" output file option.

Setup Screen – Standard View - Enhancements - Added a Maximum Data File size setting.

Setup Screen – Standard View - Enhancements - Added the ability to set defaults for the Schedule, Data Files, Clock, and File Retrieval tabs.

Setup Screen – Standard View - Enhancements - Added the ability to copy device settings from one device to another.

Setup Screen – Standard View - Enhancements - Added Pakbus Encryption Key setting to the CR1000/CR3000/CR800 Series.

Setup Screen – Standard View - Enhancements - Added ability to add a PakBusPortHD to an MD9 Remote, so that PakBus dataloggers can be used in an MD9 network.

Setup Screen – Standard View - Enhancements - Added ability to use Status Table station name in header of data files.

Setup Screen – Standard View - Bug Fixes - Check for duplicate PakBus addresses now includes PakBus routers.

Setup Screen – Standard View - Bug Fixes - Fixed an access violation that occurred when cutting and pasting into the network map.

Setup Screen – Standard View - Bug Fixes - Fixed an access violation hat occurred when using the "#" character in a phone number.

Setup Screen – Standard View - Bug Fixes - Fixed access violation related to the deletion of file patterns on the File Retrieval tab.

Setup Screen – EZ View - Enhancements - Added ability to use MD9 connection with a PakBus datalogger.

Setup Screen – EZ View - Enhancements - Added PakBus Encryption Key setting to the CR1000/CR3000/CR800 Series.

Setup Screen – EZ View - Bug Fixes - Changed Max Time On-Line maximum to 23 h 59 m 59 s.

Setup Screen – EZ View - Bug Fixes - Changed default Beacon Interval to 0.

Setup Screen – EZ View - Bug Fixes - Time zone offset is now applied when finish is clicked as well as when the user sets the clock.

Connect Screen - Enhancements - Added ability manually set the datalogger clock.

Connect Screen - Enhancements - Added the ability to view a file from File Control.

Connect Screen - Enhancements - Added "Midnight is 2400" option to custom collect.

Connect Screen - Enhancements - Added ability to use Status Table station name in the data file headers in custom collect.

Connect Screen - Enhancements - Added ability to bring up a station's Settings Editor.

Connect Screen - Enhancements - Changed the security level access for the calibration wizard to operator and above.

Connect Screen - Enhancements - Added ability to view subnets configured in Setup Screen.

Connect Screen - Enhancements - Added Unicode support.

Connect Screen - Bug Fixes - Fixed a bug so that the Connect Screen and all of its open child windows come to the front when Connect is pressed from the toolbar.

Connect Screen - Bug Fixes - Trying to send an OS to a 2 Meg CR1000 now gives the correct error message.

Connect Screen - Bug Fixes - Addressed an issue where the number of pages being kept for a graph did not always match what it should have been.

Connect Screen - Bug Fixes - Removed the Time of Fill column from the Station Status because the information was not always correct.

Connect Screen - Bug Fixes - Fixed a bug where if the user was connected to a datalogger, and their security was downgraded to "read only", that the connection would remain in place.

Connect Screen - Bug Fixes - Fixed a bug when dealing with very large records.

Connect Screen - Bug Fixes - Data displays now distinguish between paused and program stopped states.

Connect Screen - Bug Fixes - Fixed a problem where the compile results might not always be displayed after sending a program to the datalogger.

Connect Screen - Bug Fixes - Prevented the inclusion of whitespace from being added between the value and the units, if the units were an empty string.

Status Monitor - Enhancements - Added Pool Statistics and Pool Devices menu items/dialog boxes to monitor pooled devices.

Status Monitor - Enhancements - Added the ability to view subnets and groups.

Status Monitor - Enhancements - Added a State of Operations dialog box for PakBus and TD Devices.

Status Monitor - Bug Fixes - Fixed an invalid floating point operation when sorting datetime columns.

Status Monitor - Bug Fixes - Change the way that the server time was being estimated between clock checks.

Task Master - Enhancements - Integrated the Task Master into the server. This allows for remote task administration.

Task Master - Enhancements - Added the ability for the user to set the size of the ftp queue of files to attempt to retransfer in the future.

Task Master - Enhancements - Added calendar (cron) scheduling.

Task Master - Enhancements - Added the displaying of the server connection state to the status bar.

Task Master - Enhancements - Added information to the task summary to indicate when the various actions of the task are paused.

Task Master - Enhancements - Exposed the FTP functionality for tasks whose trigger is After File Retrieved.

Task Master - Bug Fixes - Fixed a bug where the use SFTP check box was sometimes not staying checked.

Task Master - Bug Fixes - Fixed an issue where the status grid would fall behind in the displaying of tasks.

Short Cut - Enhancements - Added a cache of the sensor files to speed loading.

Short Cut - Enhancements - Added Datalogger Step that combines the datalogger selection, scan rate selection, and CR9000X card selection.

Short Cut - Enhancements - When adding a sensor, if more than one of the selected sensor can be added, the choice of how many sensors to add is included as part of the sensor’s form rather than as a separate dialog box

Short Cut - Enhancements - When adding more than one sensor, a dialog box is available that allows you to input unique values for certain calibration and/or conversion factors (e.g., multiplier, offset, gage factor) for each sensor being measured.

Short Cut - Enhancements - Each sensor form now includes a wiring tab that shows the wiring for the sensor. This tab allows you to manually change the wiring location, if desired.

Short Cut - Enhancements - For some sensors that require an excitation voltage, the sensor form now includes parameters that allow you to calculate Sensors per Excitation Channel. (Exciting more than one sensor with an excitation channel is helpful when the sensors to be measured outnumber the available excitation channels.)

Short Cut - Enhancements - Added an SC115 checkbox to the Outputs screen to copy data to an SC115.

Short Cut - Enhancements - Added new or updated sensor files for the 27106T Wind Speed Sensor, the CS525 ISFET pH Probe, the CS650/655 Water Content Reflectometer, the CS506 Fuel Moisture Sensor, the NR-LITE2 Net Radiometer, the CNR4 Net Radiometer, a Quarter Bridge Strain Gage, Half Bridge Strain Gage, Full Bridge Strain Gage, the Geokon 4000/4050 Vibrating Wire Strain Gage, the Geokon 4100 Series Vibrating Wire Strain Gage, the Geokon 4420 Vibrating Wire Crackmeter, the Geokon 4500 Series Vibrating Wire Piezometer, Geo-Instruments Electrolevel Tiltmeter, VTI ECI-1 Embedded Corrosion Instrument, Modbus Master, Modbus Slave, BS-3+/OBS300 Turbidity Sensor, HC2S3 Temperature and Relative Humidity Sensor, OBS500 Smart Turbidity Meter (SDI-12), Device for Analog Input from SDM-AO4A, 52202 Rain Gauge (CSI), CMP3/CMP6/CMP11 Pyranometer, CS526/CS525 ISFET pH Probe, 020C Wind Direction Sensor, A100LK Wind Speed Sensor, 092 Barometric Pressure Sensor, 61302V Barometric Pressure Sensor, P2546A Wind Speed Sensor, 110PV Surface Temperature Probe, and a Wind Vane Installation Offset Correction (calculation).

Short Cut - Enhancements - Enhanced readability of Wiring Text.

Short Cut - Enhancements - Selected Sensors are now shown in a tree format and branches can be expanded or collapsed as needed.

Short Cut - Bug Fixes - Fixed an issue where toggling the advanced outputs was not configuring the flags correctly.

Short Cut - Bug Fixes - Fixed an issue where Short Cut would crash if the user attempted to delete a sensor that referenced a custom sensor file that no longer existed.

Short Cut - Bug Fixes - Creating custom sensor files for multiplexers is no longer allowed.

Short Cut - Bug Fixes - Fixed some translation issues.

Short Cut - Bug Fixes - Fixed some issues in wiring diagram where wires were not being shown.

Short Cut - Bug Fixes - Fixed an issue where a *4 attribute in a CR10X program caused and access violation.

Short Cut - Bug Fixes - Fixed a problem where if you created a program for a CR10XTD/CR10XPB that utilized high res to final storage you would get three FSL field labels for that output instead of one.

Short Cut - Bug Fixes - Fixed a problem where generating a CR10X program that used an AM25T would give an error when "differential voltages" was selected for the output type.

CRBasic Editor - Enhancements - Added a new feature, Conditional Compile and Save to the Compile menu. This item compiles the program and creates a new file in which all conditional compile constructs (e.g. #if statements) are gone.

CRBasic Editor - Enhancements - Added a Constants Customization feature.

CRBasic Editor - Enhancements - The CRBasic Editor now allows you to Save and Open Display Settings. Display settings affect the look and feel of the CRBasic Editor. This includes font and background, as well as syntax highlighting.

CRBasic Editor - Enhancements - Added Unicode support.

CRBasic Editor - Enhancements - To support Unicode, an Insert Symbol dialog box has been added to the CRBasic Editor. This allows you to insert Unicode symbols into your CRBasic program for use in Strings and Units declarations.

CRBasic Editor - Enhancements - Added the Shift+Insert hotkey to perform the paste function.

CRBasic Editor - Bug Fixes - Fixed an error when attempting to compile a program when the previous program was saved in a folder that no longer exists.

CRBasic Editor - Bug Fixes - Fixed an access violation that occurred when clicking the red x in the Confirm dialog box. It is to be noted that the access violation only happened if the cursor was on a blank line.

CRBasic Editor - Bug Fixes - Fixed a problem when attempting to replace the baud rate parameter in the SerialOpen command, by using right-click to choose from the variable list. Rather than replacing the previous baud rate, it inserted a second baud rate.

CRBasic Editor - Bug Fixes - Fixed a bug where the Undo/Redo could be very slow (up to 6 seconds for one redo) for very large files.

CRBasic Editor - Bug Fixes - Fixed so that when a line is selected and you scroll down or up it will scroll nicely at the extremes of top and bottom.

CRBasic Editor - Bug Fixes - Fixed a problem with deleting templates.

CRBasic Editor - Bug Fixes - Fixed a problem where the insert key was not toggling between insert and overwrite.

CRBasic Editor - Bug Fixes - Made the editor's screen position and window size persistent even in a dual monitor environment.

CRBasic Editor - Bug Fixes - Files opened with a double click will now cause the editor to open in the last window size used by the editor.

CRBasic Editor - Bug Fixes - Cursor doesn't go to end of line when enter is pressed splitting a line

CRBasic Editor - Bug Fixes - Fixed a problem where the Save As dialog appended an extra extension when you replaced the default extension with .dld.

CRBasic Editor - Bug Fixes - Fixed a problem during a switch from the find dialog to the replace dialog, the state was confused and it did not see the search word had changed.

CRBasic Editor - Bug Fixes - With the Find dialog box open, you can now use the Paste functionality to paste into the program.

CRBasic Editor - Bug Fixes - Fixed an issue where the cursor was sometimes misplaced after an F10 variable insert/replace.

CRBasic Editor - Bug Fixes - Fixed an issue where an extra set of parenthesis was added when using the F10 (Replace Variable) feature to replace an array variable.

RTMC - Enhancements - Added a flag to tabs with active alarms on them.

RTMC - Enhancements - Added support for Unicode.

RTMC - Enhancements - Added support for IPv6 addresses.

RTMC - Enhancements - Added the ability to change fonts for tables. Header and contents individually in Pro.

RTMC - Enhancements - Added a feature to allow copying an entire screen at a time.

RTMC - Enhancements - Changed the Configure Workspace to behave the same way as RTMC Pro.

RTMC - Enhancements - Added the functions AvgSpa, MinSpa, and MaxSpa to the expressions engine.

RTMC - Enhancements - When browsing for data that needs to be read/write, the R icon turns red to indicate it is a read only value.

RTMC - Enhancements - Added new z-order options for a single step forward or backward.

RTMC - Enhancements - Added option to undo multiple groups.

RTMC - Enhancements - Component naming is now more dynamic and tracks the data it is associated with. Chart titles are used in the name if it is one word. Labels also use the title. Images pull out the image name.

RTMC - Enhancements - Added a paste menu item to the component menu.

RTMC - Enhancements - Added a new function, SelectSwitch(), that can be used to select from multiple case predicate and value combinations. The behavior of this function is similar to that of nested IIF statements.

RTMC - Enhancements - Locale is now used when formatting numbers. Instead of 1234567 you see 1,234,567.

RTMC - Bug Fixes - Changed the expressions as well as alarm comparators to round the values down to 7 decimals and then do the comparisons. This cleans up all of the artifacts that show up in the floating point operations.

RTMC - Bug Fixes - Change 'Set Point' and 'Digital' to display timestamps recorded within data tables (time of maximum) as timestamps by default instead of nanoseconds.

RTMC - Bug Fixes - Fixed a bug where the chart series was using the current locale to format time stamp values. If this value was then interpreted again as a date, the PM of the date portion was lost.

View Pro - Enhancements - The XY Plot now supports multiple XY series. A series selection panel has been added, along with a "New" button that creates new XY series.

View Pro - Enhancements - Added ability to import CSV files.

View Pro - Enhancements - All of the dialogs in View Pro are now translatable.

View Pro - Enhancements - Added a search function to the main grid accessible using ctrl-f, or Edit/Find.

View Pro - Enhancements - Added the record view dialog to address the requirements for displaying a status table record. The record view dialog will work for any CSI file type displayed in a grid.

View Pro - Enhancements - Added cancel button to Selection Properties under line graph, FFT, Histogram, Rainflow Histogram, and XY Plot. Also added cancel buttons to Graph Options screens associated with the listed graph types. This change will change back the on-screen live changes.

View Pro - Enhancements - Extensively revised the print preview code so only one page preview is shown at a time. Also redid the print code. Print Preview will no longer "count pages". Switching from portrait to landscape or back now happens instantaneously without showing a dialog.

View Pro - Enhancements - Added two decimal places to the selection data on the graph.

View Pro - Enhancements - Multiple large FFTs in the same file are now supported.

View Pro - Enhancements - Changed page up/page down functionality to match Excel rather than open office calc.

View Pro - Enhancements - Bool8 is now supported for TOB(X) data files

View Pro - Enhancements - Added support for the Rainflow Histogram Sample process strings.

View Pro - Bug Fixes - Fixed a problem with the view grid mouse state missing the mouse up event allowing the data grid to scroll with the mouse when the mouse pointer is off of the application.

View Pro - Bug Fixes - Trying to copy data from an empty column no longer causes an access violation

View Pro - Bug Fixes - Fixed a problem where the last record was missing in the graph when an entire column was graphed

View Pro - Bug Fixes - Fixed a problem where the number of points displayed in a line graph was one less than the number reported.

View Pro - Bug Fixes - The values in the statistics dialog are now correct when panning.

View Pro - Bug Fixes - Scrolling one line graph associated with a view file will no longer update the position of the scroll bars on other line graphs associated with the same file

View Pro - Bug Fixes - Fixed an unzoom/unpan issue that put the Y axis on a line graph in custom axis mode.

View Pro - Bug Fixes - When scrolling in the graph the data grid view no longer scrolls when there is less than a page of data

View Pro - Bug Fixes - Changed the file parser to be more tolerant of extra lines at the end of a file. (.

View Pro - Bug Fixes - Opening an empty DAT file from the data collection results dialog will no longer lock view from opening subsequent files.

View Pro - Bug Fixes - TOA5 files with no time stamp or record number will now open.

View Pro - Bug Fixes - No longer showing erroneous message about too many records when column selections don't match up in the XY Plot.

View Pro - Bug Fixes - Fixed an issue where the y-axis didn't clear after removing a selection that was graphed using record numbers on the x-axis.

View Pro - Bug Fixes - Closing View Pro after viewing a binary file as text will now work.

View Pro - Bug Fixes - Fixed panning then clearing line graph access violation.

View Pro - Bug Fixes - Fixed time stamp comparison code that wasn't precise enough for some files.

View Pro - Bug Fixes - When the database connection fails to connect an error dialog will now appear.

View Pro - Bug Fixes - Changed the method for calculating the standard deviation to match the method found in the data logger operating systems.

View Pro - Bug Fixes - View Pro will no longer fail to terminate a string when a null value was encountered. Non-string data in strings will no longer show up when null values are contained therein.

View Pro - Bug Fixes - Boolean values will now show as -1 and 0 rather than true and false.

Split - Enhancements - Added 'qq' to format string. Acts like hh except gives 24 at midnight.

Split - Enhancements - Added two more custom date format strings TOA5 and 24TOA5. The former produces a TOA5 formatted timestamp. The latter does the same except with midnight set to 24:00:00.

Split - Enhancements - Unicode support added.

Split - Enhancements - Enhanced -time offset crossing year boundary. So on first day of the year, a negative offset can back up to previous year.

Split - Bug Fixes - Fixed HourArray and dayofyear format strings so that they work properly when a time offset is used. Also these fields were not properly quoted when Date vs Edate was used. Fixing this may break existing .PAR files. These (and the "Serial" format string) are intended to be used as the entire format string e.g. edate("dayofyear";4;3;2).

CardConvert - Enhancements - Added 2400 hours at midnight support.

CardConvert - Enhancements - Added Unicode support.

CardConvert - Bug Fixes - Fixed some issues with TOB1 files that grow over 4 Gb.

CardConvert - Bug Fixes - Fixed 'headers do not match' error displays.

TroubleShooter - Enhancements - Added trouble check for when multiple modems are placed under a single SerialPortPool or TerminalServerPool.

TroubleShooter - Enhancements - Enhanced TD-RF Quality Test.

TroubleShooter - Bug Fixes - The selected TroubleShooter checks are now persistent

TroubleShooter - Bug Fixes - Fixed a bug where the Find PakBus IDs operation was never showing the message indicating what was found.

Network Planner - Enhancements - Added support for the NL200, NL240, RF500M

Network Planner - Enhancements - Added a new Notes tab to station properties. These notes will be displayed on the Setup Screen's Notes tab and on the Connect Screen in LoggerNet.

Network Planner - Enhancements - Added a new "Notes" device type that allows the user to add notes that will be displayed on the canvas.

Network Planner - Enhancements - Changed the way that the bridge mode interface works for the CR1000 to allow a bridge mode device (NL200) and a peripheral Ethernet device (NL115) to be connected at the same time.

Network Planner - Enhancements - Added support for IPv6 addresses.

Network Planner - Enhancements - Added a device type to deal with generic radio links. This device type will allow the user to create transparent or point to multi-point (master/slave) links. Transparent links will form PakBus routes using the same rules as are used for the RF401. Point to multi-point links will be formed using similar rules as the RF450

Network Planner - Enhancements - Added Unicode support.

Network Planner - Enhancements - Added properties for CR1000, CR3000, and CR8xx dataloggers that will allow the user to specify the PakBus Encryption Key setting for those dataloggers.

Network Planner - Enhancements - Added security codes as optional properties of devices and enabled these properties for the CR1000, CR3000, and CR8xx datalogger types.

Network Planner - Bug Fixes - Changed the MD485 so that the protocol mode is set to transparent when the CS I/O ME mode is used

Network Planner - Bug Fixes - Added code to ensure that all modal dialogues are centered on their parent windows. This addresses an issue where the user had the application on one monitor and all of the dialogues were showing up on the other monitor.

PakBus Graph - Enhancements - Added support for IPv6 addresses.

PakBus Graph - Enhancements - Added Unicode support.

PakBus Graph - Bug Fixes - Fixed a bug where settings editor sub-panels were getting deleted twice if the settings were reloaded.

LogTool - Enhancements - When the LogTool is running remotely and zip all log files is selected, files are now zipped up to a specific file on the server's machine, and then transferred to the client's machine to the location that the user selected.

LogTool - Enhancements - When retrieving a zipped file from a remote server, the percentage of the file retrieved so far is now displayed.

LogTool - Bug Fixes - Delete Log Files and Zip Log Files are now only enabled if security level is Full Administrator.

LogTool - Bug Fixes - Fixed an issue where you could not Save/Copy/Print the text of a Low Level Log window after its internal buffer had been "filled".

Device Configuration Utility - Enhancements - Added support for the NL200, CC5MPX, CDM-VW300 Series, TX312/TX320, NL240, AL200, CRS450 Series, SC-CPI, OBS500, EC120.

Device Configuration Utility - Enhancements - Added ability for some devices to be configured over the network (using IP).

Device Configuration Utility - Enhancements - The device type can now be categorized. This is controlled from the Options menu.

Device Configuration Utility - Enhancements - Added an optional button to the Logger Control panel that will allow the user to retrieve the currently running program from any datalogger that supports retrieval (CR1000, CR3000, CR8xx, CR10X-XX, CR23X-XX, CR510-XX, CR5000, and CR9032).

Device Configuration Utility - Enhancements - Added new settings for the CR1000, CR3000, and CR800 to configure the NL240 bridged network stack

Device Configuration Utility - Enhancements - Added code to the datalogger passwd file editor dialogue that will allow the file, when written to the datalogger, to optionally be marked as hidden on the datalogger. This has been done in order to avoid having the file read by the web or FTP server since doing so could assist in breaking the datalogger security.

Device Configuration Utility - Enhancements - Added support for a Bluetooth serial port.

Device Configuration Utility - Enhancements - Enabled the SDI-12 option for the CWB100.

Device Configuration Utility - Enhancements - Increased the length limit on the "PPP User Name" component of the "PPP Configuration" setting for the CR1000, CR3000, and CR8xx from 31 to 63 characters.

Device Configuration Utility - Enhancements - Added ability to copy from help/description area. Also added copy and paste support to terminal.

Device Configuration Utility - Enhancements - Changed the file selection controls in the browse configuration summaries dialogue so that a directory picker is used in conjunction with a list box that shows the possible files in the chosen directory. The directory picker has a browse button that brings up a standard directory browse dialogue.

Device Configuration Utility - Enhancements - Added options for 300 fixed for the baud rate settings for the COM1-COM4 devices for the CR1000, CR800, and CR3000 dataloggers.

Device Configuration Utility - Enhancements - Added IPv6 support.

Device Configuration Utility - Enhancements - Added a file control panel for PakBus dataloggers that support file systems.

Device Configuration Utility - Enhancements - Added support for a new setting, PakBus Encryption Key for the CR1000, CR3000, and CR8xx device types.

Device Configuration Utility - Enhancements - Added Unicode support.

Device Configuration Utility - Enhancements - Added store log files to the Options menu. The default value is off and when this is off, only minimal logging occurs. When this is on, normal logging occurs (including logging the PakBus password).

Device Configuration Utility - Enhancements - Added support for new functionality in the CWS900 implemented with version 2 of the CWS900 operating system.

Device Configuration Utility - Bug Fixes - Changed the code that compares formatted setting values in the configuration summary comparison dialogue so that the comparison is performed in a case-sensitive fashion.

Device Configuration Utility - Bug Fixes - Increased the maximum security code (when connecting) from 65535 to 99999.

Device Configuration Utility - Bug Fixes - Changed the behavior of the "Edit .csipasswd File" button in the deployment panel for the CR1000, CR800, and CR3000 so that the value of the hide check box is preserved in the application configuration and restored when the dialog is created afresh.

Device Configuration Utility - Bug Fixes - Fixed a bug where a *.a43 pattern was used to search for SDM-SIO1 instead of *.hex

Device Configuration Utility - Bug Fixes - Fixed copy and paste.

Device Configuration Utility - Bug Fixes - Fixed a bug with the PakBus routes setting where the port number was not large enough to handle all of the values that the datalogger could use.

Device Configuration Utility - Bug Fixes - Now correctly report the European variant of the serial number.

CoraScript - Enhancements - Added support for pooled devices (serial-port-pool and terminal-server-pool).

CoraScript - Enhancements - Added support for the add-task, remove-task, list-tasks, get-task-setting, list-task-settings, enable-tasks, disable-tasks, and trigger-task commands.

CoraScript - Enhancements - Added support for the LgrNet allowRemoteTaskAdmin setting.

CoraScript - Enhancements - Added support for the successExpression and triggerDelay task settings

CoraScript - Enhancements - Created a new device setting, tableFileStationNameSelector, that controls how the station name field in table files will get filled.

CoraScript - Enhancements - Added support for task trigger options to trigger the task after any data has been collected and after a file has been retrieved during a file synch operation

CoraScript - Enhancements - Added a new command, set-alt-parent, to corascript. This command can be used to assign a device to the next of a series of alternate parent devices.

CoraScript - Enhancements - Added new program options, --input and --input-file, that allow the caller to specify that the program input should come either from a string or from a specified file. This is intended to make it easier to invoke corascript from a separate program without having to worry about redirection.

CoraScript - Enhancements - Added the add-view, change-view, remove-view, monitor-view, list-views, and list-view-map commands

CoraScript - Enhancements - Added support for the new LgrNet settings that control device and collect area defaults.

CoraScript - Enhancements - Created a new LgrNet setting, maxDataFileSize, that will be used by the server to optionally limit the size of its data files.

CoraScript - Enhancements - Added support for the new defaultPollForStatistics LgrNet setting as well as the new pollForStatistics device setting.

CoraScript - Enhancements - Added support for a new file-control command option to compile the program, keep it paused, and to mark all final storage tables as filled. Also added support for the move-file, move-stop-delete-power-up, move-stop-delete-run, copy-file, copy-stop-delete-power-up, and copy-stop-delete-run command options.

CoraScript - Enhancements - Added Unicode support.

CoraScript - Enhancements - Added a new command, list-default-lgrnet-settings, that will generate the list of default values for LgrNet level settings.

CoraScript - Enhancements - Added support for a new value, NOH of the format option for the logger-query command that, when specified, will produce a format similar to the TOA5 format with no header.

RWIS Administrator - Enhancements - Added IPv6 support.

RWIS Administrator - Enhancements - Added Unicode support.

Server - Enhancements - Added support for SerialPortPool and TerminalServerPool.

Server - Enhancements - Implemented the Device Monitor Pool transaction.

Server - Enhancements - mplemented the LgrNet Monitor Pooled Resources transaction.

Server - Enhancements - Reworked the win32 version of the TCPComPort device type so that it now uses mostly the same source as the Linux version rather than implementing directly on top of winsock as it had.

Server - Enhancements - Added support for the TCP password setting for the TCPComport device type.

Server - Enhancements - Changed the behavior of the BMP5 file control command so that, if the original command specified that the data should be left in the datalogger tables, the server will preserve the data in its own cache table as well. This should provide a means to change the program without losing data from the cache.

Server - Enhancements - Changed the parent/child configuration rules to allow a PakBusPortHD device type to be added as a child to an MD9 Passive device type.

Server - Enhancements - Changed the operation for polling NTCIP-ESS stations so that, if the station reports that the local time OID is an invalid object, the server time (adjusted for the time zone offset) will be used instead of the reported station time.

Server - Enhancements - Added a new device setting, tlsClientEnabled, that applies to TCP serial ports and will control whether the server will attempt to start TLS for outbound TCP connections made by that port. The primary use of this setting is to support DevConfig's new encryption feature but its use may be expanded in the future.

Server - Enhancements - Added support for the file format options associated with collect areas as well as the formatted data advise transaction so that the option to format midnight timestamps as 24:00 are now supported.

Server - Enhancements - Added code to track and report the client application name as well as the client's user name in reports for the LgrNet Operations Enumerate transaction where these attributes are applicable.

Server - Enhancements - Added code to clear the count for verifying a PakBus neighbor link when a full packet has been received from that neighbor. This will prevent the server from initiating verification when the PakBus port has been off-line and the datalogger sends one way data. This will not prevent the initial hello from taking place if the neighbor has been newly detected.

Server - Enhancements - The Task Master engine has been integrated into the server.

Server - Enhancements - Added IPv6 support.

Server - Enhancements - Created a new device setting, tableFileStationNameSelector, that controls how the station name field in table files will get filled. This setting will be applied to the CR1000, CR3000, CR8xx, CR5000, and CR9000 datalogger types. If it is set to indicate that the reported station name should be used, this setting will cause the server to attempt to poll compile results each time that a new operation is added and the station has been off-line

Server - Enhancements - Added support for the socketPreOpenScript and socketPostCloseScript device settings for root level devices. This setting will get marked as ignored for any device but the TCP serial port and the terminal server. These settings will specify the names and command lines for programs that must be executed before the port attempts to open a socket and after that socket has been closed.

Server - Enhancements - Added code for BMP5 dataloggers that will allow the server to respond to get value requests from the datalogger with data from the specified cache table. The cache table is identified using the station-name "." field-name syntax that RTMC uses.

Server - Enhancements - Added a timer to delay the automatic retrieval of table definitions by fifteen seconds

Server - Enhancements - Implemented the following new LgrNet transactions: LgrNet Add View, LgrNet Change View, LgrNet Remove View, LgrNet Enumerate Views, LgrNet Monitor View, LgrNet Enumerate View Map.

Server - Enhancements - Added support for LoggerNet default settings.

Server - Enhancements - Added support for the new option for the server to send the "extended" version of the data broker data advise start acknowledgement message. This extended version allows whole arrays to be described with one entry instead of an entry for each array element. This is to support increased efficiency when dealing with large data records.

Server - Enhancements - Added code to the file synch poll operation implementation so that, if the control structure specifies a pattern that does not include a drive specification, the effective pattern used for matching will be modified to include a wildcard specification for the drive.

Server - Enhancements - Created a new LgrNet setting, maxDataFileSize, that will be used by the server to optionally limit the size of its data files.

Server - Enhancements - Added support for the pollForStatistics device setting for BMP3 and BMP5 dataloggers. Also added code to update relevant statistics when the status table values are polled.

Server - Enhancements - Added support for PakBus Encryption (AES-128).

Server - Enhancements - Changed the device file enumeration transaction so that it can send a longFileSize attribute as well as a fileSize attribute. This change was made to support large (> 2 GB) file system capacities on the datalogger.

Server - Enhancements - Added code to the PakBus router base class that will produce a fault comms log message whenever a delivery failure message is handled by the server.

Server - Enhancements - Added a code in the device file control transaction implementation to deal with the new compile, pause, and mark tables as full control option that is available for the CR1000 and cousins. This is a mechanism to allow recovery of data that has been lost on the datalogger after a power loss (the user forgot to set the run on power up bit) or after the user inadvertently sent a program to the datalogger.

Server - Enhancements - Changed the BMP5 get compile results and get table definitions transactions to alter the compile results with a warning if there is a program running but there is no power up program running

Server - Enhancements - Changed the file synch poll operation so that it will allow the temporary files to remain after a communication failure and, on the next collection, to attempt to collect starting from the end of these files. This behavior is not supported by the current released OS (cr1000.std.26) but will be in future operating system versions. Once this feature is supported by the datalogger, it could greatly reduce the amount of data that has to be transferred when trying to get data files again.

Server - Enhancements - Changed functions and classes that deal with file names and directory names so that they assume the use of Unicode encoding.

Server - Enhancements - Added code to the server and the PakBus router class that will allow us to track operation reports for PakBus operations such as the hello, send neighbors, get neighbors, echo (ping), and client sponsored PakBus transactions such as those used by PakBus Graph and the settings editor applications.

Server - Enhancements - Extended the time that the PakBus/TCP Server will wait on a new connection before hanging it up from five seconds to forty seconds. Also added code so that this device will broadcast a hello request on new connections if no activity has occurred within five seconds of the initial connection.

Server - Enhancements - Added support for the comma-separated no-header format option for the data broker formatted data advise transaction.

Server - Enhancements - Added a transaction log message that gets posted each time that the next time to poll gets calculated.

Server - Bug Fixes - Fixed a bug in the code that forms static PakBus routes where, if an RF-PB device type (which acts as both an RF-TD remote as well as a PakBusPort) is defined as a child (directly or otherwise) to another RF-PB device type, the parent RF-PB could wind up picking up the static route to any stations attached to the child RF-PB

Server - Bug Fixes - Added code for the BMP1 table poll operation that will prevent the server from sending a hole collection command to the datalogger that is larger than the logger can handle. (This was already being done for the hole collection operation but was not for the table polling version.)

Server - Bug Fixes - Fixed a bug that could crash the server when multiple set value commands were queued for a mixed-array datalogger while the datalogger was in an off-line state. This could set up the conditions where an infinite recursion took place until the program stack was exhausted and the server crashed.

Server - Bug Fixes - Modified the code in the cache manager thread that adds records for a table so that older records will be eliminated if a set of records is larger than the size of the cache table. Failure to do this could result in inconsistent information for table blocks because too few records were "released".

Server - Bug Fixes - Fixed a bug that could crash the server if it was trying to open the link on a TCP serial port and the address look-up failed for the specified address.

Server - Bug Fixes - Fixed a bug in the Linux build where memory could leak each time that a thread was ended. This was happening because the is_started flag was being cleared by the thread entry point. Because of this, the pthread_join() function was never called and the process wound up accumulating memory as threads were started and stopped.

Server - Bug Fixes - Fixed a bug where, if an exception was thrown when an incoming TCP messaging connection was handled, that exception would wind up crashing the LoggerNet server.

Server - Bug Fixes - Added code to handle the case when a communication error is reported by another operation in order to ensure that the logger lock was released.

Server - Bug Fixes - Added code to ensure that any reports associated with a device are removed when that device gets shut down. Failure to do this could lead to a crash if the device was deleted after being shut down

Server - Bug Fixes - Fixed a bug where, if the callbackTcpPort or the comPortId settings were changed for the TCP serial port device type while it was waiting for a call-back connection, the server would not force the link off-line in order to apply the new setting values.

Server - Bug Fixes - Added code to ensure that the notification of whether communication is enabled is not sent to the devices unless the communication enabled condition has really changed. This addresses a bug where BMP5 data collection could get stuck if a client set the commEnabled setting (either the device or LgrNet setting) to true when it was already true.

Server - Bug Fixes - Fixed a bug in the shut down code where the device was removed from the network map structure before its shutdown() method was called. On some networks, this could lead the server to throw an unhandled exception when it was being shut down.

Server - Bug Fixes - Concentrated the work of authenticating a TCP link in the TCP port provider class rather than allowing the PakBus port object do this. The primary reason for this change is that authentication failed when a connection was being made via call-back. Authentication on a new TCP link will now take place if the tcp-password setting is not empty for the root device object or if it is set for any of that device's children.

Known Issue - The following LNDB issue affects View Pro and RTMC Pro when using an LNDB database: If LNDB has been running with a SQL Server 2005 database, the timestamps in the tables will be of type DateTime. If you then upgrade to SQL Server 2008 the DateTime data type for the timestamps is carried over to the 2008 database. However, LNDB expects the timestamps to be of type DateTime2 which has a higher precision than DateTime. This type mismatch causes queries to fail. In order to fix this issue, you will need to use the SQL Server management tools to change the data type for the timestamp columns to DateTime2.

Toolbar Enhancement - Added "Give Feedback on LoggerNet" menu item.

Toolbar Enhancement - LNDB will now launch from the toolbar if UAC is on.

Toolbar Enhancement - LoggerNet will now find demo common apps (QuickReports) if the full app is not installed

Toolbar Bug Fix - LoggerNet will now show up on the Taskbar if the user specifies "Run Minimized" on a Windows shortcut.

Toolbar Bug Fix - Fixed the race condition that arises when the toolbar (set to automatically run, with the computer automatically logging in), starts before the server and determines the service isn't running.

Setup Screen Std View Enhancement - Changed "Image Files" tab to "File Retrieval" Tab.

Setup Screen Std View Enhancement - Changed the organization and design of the PakBusTCPServer Routing tab to match the design in DevConfig. This change allows input validation.

Setup Screen Std View Enhancement - Changed the Network Map component to call help for the selected device type when F1 is hit.

Setup Screen Std View Bug Fix - Fixed a path parsing problem for filenames with wildcards used in the background for data file output names.

Setup Screen Std View Bug Fix - Made Collect Mode controls enabled in the Data Files tab if they apply when the "No Output File" option is selected.

Setup Screen Std View Bug Fix - Communications Disabled Symbol fixed to indicate the state after changing from EZ View.

Setup Screen Std View Bug Fix - Changed the default file extension for the Associate button on the program tab to *.tdf for PakBus loggers.

Setup Screen Std View Bug Fix - Fixed a problem where the RFRemote address couldn't be cleared or edited very easily.

Setup Screen Std View Bug Fix - Modified the Filename edit component in the Data Files and Final storage tabs to correctly handle path delimiters for Linux data file output paths.

Setup Screen Std View Bug Fix - Addressed a bug that was preventing device settings from being copied when an entire branch was copied using ctrl-shift-c and then pasting. Only the device settings for the root device were actually being copied.

Setup Screen EZ View Enhancements - Backup and Restore added to EZView.

Setup Screen EZ View Enhancements - Double-clicking a datalogger in the EZ-View will now edit the datalogger instead of renaming it. The user can still rename it in the wizard if that was their intention.

Setup Screen EZ View Bug Fix - RF95/RF3XX is no longer a connection option for CR200 stations.

Setup Screen EZ View Bug Fix - The datalogger settings stored in the inifile for the EZ Setup Wizard are now only loaded when the Wizard is initialized. They previously were loaded every time the datalogger name was set.

Setup Screen EZ View Bug Fix - Fixed an issue where an upgrade from PC400 to LoggerNet would cause the EZView of the setup screen to not allow editing of dataloggers.

Setup Screen EZ View Bug Fix - Output file settings are now canceled when the user clicks cancel in the EZSetup Wizard.

Connect Screen Enhancement - Data collection attempts after a datalogger OS version change will no longer treat that change as a conflict in header and backup the data file.

Connect Screen Enhancement - Added the ability to sort the data in the program summary dialog by the column headers.

Connect Screen Enhancement - You can now connect to a highlighted datalogger by pressing the Enter key.

Connect Screen Enhancement - Added the ability for the user to view the Units value of their data.

Connect Screen Enhancement - Added a last record number collected column to the custom data collection summary dialog.

Connect Screen Enhancement - Added the ability for the user to show and hide the symbols for a series on a graph for each individual field. This can be done either through the popup menu, or from the trace options dialog.

Connect Screen Enhancement - A button was added to the graph that opens the trace options dialog in an attempt to increase the visibility of those settings.

Connect Screen Enhancement - A Delete All button was added to the graph.

Connect Screen Enhancement - The Add, Delete, Delete All, and Trace Options buttons are now on a toolbar at the top of the graph.

Connect Screen Enhancement - Added the ability for the user to change the cell and font color for the field selection cell in the numeric display.

Connect Screen Enhancement - Changed the way that the graph deals with public and input location data when it is stopped and restarted. The data for those fields will be kept in the graph. However, there will be a gap between that old data and any new data that is collected by the graph. The data for final storage fields will continued to be cleared and the graph will attempt to backfill that data so that there are no gaps in the graph for those fields.

Connect Screen Enhancement - The ASCII Table Data, No Header file format option has been added to Custom Collection.

Connect Screen Bug Fix - Worked around a bug in the string grid common control where an access violation could be generated when the user used the wheel mouse and the scroll bars were not visible.

Connect Screen Bug Fix - Fixed a bug where the table monitor would stop monitoring if the user deleted and then readded the same logger while they were monitoring.

Connect Screen Bug Fix - Fixed a problem with the wrong file extension being used in File Control.

Connect Screen Bug Fix - Fixed a problem where the wrong values could be displayed to the user after stopping and restarting a display.

Connect Screen Bug Fix - Fixed a problem where the unprintable charaters were being displayed to the user in data displays.

Connect Screen Bug Fix - Fixed a bug that could happen when the data display contained some invalid fields when working with mixed array dataloggers.

Connect Screen Bug Fix - Fixed a bug where not all of the trace settings would be copied or reset when the user moved multiple fields around in the graph.

Connect Screen Bug Fix - Fixed a bug where some of the fields would be deleted when moving multiple fields around in the graph.

Connect Screen Bug Fix - Fixed the way that the table monitor displays data for aliases.

Connect Screen Bug Fix - Fixed a problem where sending a program to one datalogger stopped the Numeric Display for a second datalogger.

Connect Screen Bug Fix - Made boolean string comparisons in the numeric displays case insensitive.

Connect Screen Bug Fix - Fixed a bug where some of the data cells in the data displays were not being reset when the selection was deleted

Connect Screen Bug Fix - Fixed a bug where the program file name was not being updated when the station selection was changed.

Connect Screen Bug Fix - Fixed a problem where changing the directory for all of the tables at once was not being applied by if Create New File was selected.

Connect Screen Bug Fix - Fixed a bug where the "show hints" state was not persistent

Connect Screen Bug Fix - Fixed a bug where the connect menu item was not disabled properly sometimes.

Connect Screen Bug Fix - Fixed a bug where the string gid used for the table monitor would not behave properly if it was given focus in the code without there being a selection specified.

Connect Screen Bug Fix - Fixed a timing problem that would show the compile results when the attempt to send a program failed.

Connect Screen Bug Fix - Fixed a bug where the table monitor would not restart collection when it was unpaused if the user switched the selected table while it was paused.

Connect Screen Bug Fix - Fixed a bug where the extension for a file when the "Create New File" option is selected in the custom collection, was always .dat.

Connect Screen Bug Fix - Fixed a problem where the inclusion of the '%' character would cause problems when trying to create a unique file name in Custom Collect.

Connect Screen Bug Fix - Fixed an issue where not all of the properties of a cell were being copied when a field in a cell was moved in the data displays.

Connect Screen Bug Fix - Fixed a bug where the table monitor would lose track of its state when it was paused while monitoring data in the passive mode.

Connect Screen Bug Fix - Fixed a bug where the collect area would not be redefined when a user would load a configuration that added some fields to the table that was currently being monitored.

Connect Screen Bug Fix - Fixed a bug where the Collecting Data dialog would not be closed properly when it was closed by the code while the application was minimized.

Status Monitor Enhancement - Added a confirmation message box when the user checks the Pause Network checkbox.

Task Master Enhancement - Improved the performance of the task master when getting and displaying a large number of tasks.

Task Master Bug Fix - Fixed a bug where the renaming of a task could bring in the previous settings.

Task Master Bug Fix - Fixed an error that resulted in the %F switch from being recognized if it was at the end of a command line that was more than just "%F".

Task Master Bug Fix - Fixed a bug where a scheduled task that was moved to be after another task would get orphaned when the taskmaster was restarted.

Task Master Bug Fix - The Task Master is now restored from minimized when you click on it from the LoggerNet Toolbar.

Task Master Bug Fix - Fixed a problem where a second ping would not take place and cause an erroneous loss of communication message.

Task Master Bug Fix - Enhanced the task engine so that the amount of time to read and save its persistence is greatly reduced, and some redundant saves were removed.

Task Master Bug Fix - Fixed a problem where the task status was not updating after the file transfer was complete

Task Master Bug Fix - Fixed a problem where a task after an FTP task would be executed.

Task Master Bug Fix - Changed the messaging so that the FTP password is not visible.

Task Master Bug Fix - Fixed a problem with the task engine where if there was a white space character in the file name, that name would be split into multiple command line arguments which made it unreadable.

CRBasic Editor Enhancement - The CR200 precompiler can now produce .TDF files from within the CRBasic Editor and also can Show Labels.

CRBasic Editor Enhancement - Removed the Silent Compressed File mode and the Always Create a Compressed File mode. The user can still manually create a compressed file via the Edit

Create Compressed File menu item. Sending a compressed file to the datalogger is controlled via the Compressed File checkbox on the Save and Send dialog.

CRBasic Editor Enhancement - Enabled the Enter key for selecting instructions in the Instruction Panel. Previously the user had to double-click with the mouse.

CRBasic Editor Enhancement - Added the SDMCAN processing to the CRBasic Editor. This includes adding the "Select .PCK Values" button to the SDMCAN instruction edit box. This new feature facilitates the use of the SDMCAN instruction in the CRBasic Editor.

CRBasic Editor Enhancement - The search function now works as follows: If text is highlighted, the user can simply enter F3 or click the Find Next button and the text will be searched for without resorting to the find dialog. The last item searched for will be remembered even if the highlight has been removed. If the highlighted text is changed, the new text will sought after.

CRBasic Editor Enhancement - Bookmarks are now persistent from one CRBasic session to another. Bookmarks are saved when the file is saved.

CRBasic Editor Enhancement - Added functionality where the CRBasic Editor watches the hard drive copies of the files currently open in the Editor. If the date changes on one of the files (i.e., someone copies a new file over the existing one), a message is displayed in the Editor notifying the user that the underlying file has been changed and giving the user the option to reload from the underlying file

CRBasic Editor Enhancement - Added functionality to provide the capability to open a read only screen of a program that is already open in the Editor. This gives the user with very large programs the ability to examine multiple areas of the program at the same time if desired.

CRBasic Editor Enhancement - You can now continue an instruction onto multiple lines by placing the line continuation indicator (a single space followed by an underscore “_”) at the end of the each line that is to be continued.

CRBasic Editor Enhancement - Changed the default for the Run On StartUp option for the Compile, Save, and Send dialog to True

CRBasic Editor Enhancement - The user can now turn the right margin line and the pagination lines off if desired.

CRBasic Editor Bug Fix - Fixed a bug so that selecting a file that does not exist from the Recent Files list no longer gives an access violation. This only occurred when there were no other files open in the editor.

CRBasic Editor Bug Fix - Fixed a bug so that ending a line with a comma will not hang CRBasic Editor for a Dim statement containing an array and multiple line initialization.

CRBasic Editor Bug Fix - Fixed a bug so that the CTRL+F processing was extended to function properly when multiple files are open in the Editor. This eliminated a List Index Out of Bounds error.

CRBasic Editor Bug Fix - Fixed a bug so that you no longer get an access violation when doing combinations of Ctrl+T, Ctrl+Q, and Ctrl+I.

CRBasic Editor Bug Fix - Fixed a bug relating to closing the toolbar when the CRBasic Editor has pending edits. A Save dialog with Yes, No, and Cancel is displayed. If you select Cancel, the toolbar did not shutdown but it would when the CRBasic Editor was closed later. The shutdown is now aborted if cancel is pressed.

CRBasic Editor Bug Fix - Fixed a bug where Rebuild Indentation could cause an access violation.

CRBasic Editor Bug Fix - Fixed a bug so that multiple Public statements used to initialize arrays do not give a duplicate variable name error for "}".

CRBasic Editor Bug Fix - Fixed a bug so that CRBasic will handle the variable scope and labeling issues created with function and subroutines containing local (Dim) variable declarations so that F9 and F10 display the variable lists properly depending on the cursor position.

CRBasic Editor Bug Fix - Fixed a bug so that a duplicate name error is not displayed when a public variable and a dim variable declared in a function or subroutine have the same name

CRBasic Editor Bug Fix - Fixed a bug so that entering a bookmark does not clear the Undo list.

CRBasic Editor Bug Fix - Fixed a bug so that, for an instruction like If IfTime(245,300,Sec) Then PortSet(7,1), the PortSet instruction is not wiped out when you insert new values in the IfTime instruction.

CRBasic Editor Bug Fix - Fixed a bug where if a statement with parameters is within an "inline" IF statement, the right-click(alt-click) did not bring up the parameter prompt screen.

CRBasic Editor Bug Fix - The CRBasic Editor is now restored from minimized when you click on it from the LoggerNet Toolbar.

RTMC Enhancement - A ValueSynch function has been added to allow you to synchronize the data when displaying data from two different stations.

RTMC Enhancement - New functions are available for expressions including ToDate, ToFloat, ToInt, IsFinite, Ceiling, Floor, Hex, HexToDec, Round, StdDev, StdDevOverTime, StdDevOverTimeWithReset, AvgRunOverTimeWithReset, MaxRunOverTimeWithReset, and MinRunOverTimeWithReset.

RTMC Enhancement - Images and sounds used in a project are now embedded in the project. This allows projects to be shared more easily.

RTMC Bug Fix - Fixed a problem with time components with a source of "Time Value" or "Server Time on last Data Collection From Station" not updating in Run-time.

RTMC Bug Fix - Fixed an issue with graph background images not showing up in RTMC Run-time.

View Pro Enhancement - You can now view LoggerNet database tables in View Pro.

View Pro Enhancement - Added a new option "View

Lock TimeStamp Column" which will lock the timestamp column on the left of the data in the grid for all files that have a timestamp. This setting is global for all open tables, and persistent due to being stored in the inifiles.

View Pro Enhancement - reated a new common axis for the line graph to show up on the right. Assignment of series to the right Y-axis is made using the popup menu accessed by right clicking a selection in the selection panel and clicking "assign to right axis". Single click selection of a series in independent axis mode has been re-instituted. Clicking on a selection will show its y-axis on the side to which it is assigned. Grid lines only appear by default for the left axes.

View Pro Enhancement - Created a new model for the selection. Selections which are created before a graph has been opened are associated with a universal selection set, denoted in the selected graph combobox by the title "None". This selection set will allow the creation of column, block, and row selections for use in graphs or copy and paste operations. When a new graph is created the selections allowed in that graph type will be moved to the graph and removed from the "None" selection set.

View Pro Enhancement - Improved performance when working with array-based data files.

View Pro Enhancement - You can now deselect columns that were created in a group of multiple columns by clicking their header.

View Pro Enhancement - Y Axes on the line graph are now shown in scientific notation when the values are smaller than 0.0001 or greater than 999,999,999.

View Pro Enhancement - Individual Histogram/FFT records can now be cleared via the right click menu item "Clear Selection" in the grid.

View Pro Enhancement - The printout will now include the full header if "Show Full Header" is enabled.

View Pro Enhancement - You can now clear an associated FSL file in the Array Definitions Dialog.

View Pro Enhancement - The "add selections to selected graph" menu item now shows up when the selected graph is none with a menu of graphs to select from if there are selections to add.

View Pro Enhancement - You can now move the graph cursor left and right with the arrow keys. Moving the graph cursor to the edge of the visible data will cause the file to scroll in that direction.

View Pro Enhancement - New selection mechanism that lets View Pro selections be made with the keyboard using the grid selection cursor with the arrow keys. Hit the space bar to select a whole column, or hold down the shift key and move the selection cursor with the arrow keys to select data.

View Pro Enhancement - A "Copy Selection" menu item has been added to the popup menu on the grid view.

View Pro Enhancement - A "New ..." button was added to the selection panel for FFTs, Histograms, and Rainflow Histograms. The new button lets you make a new selection to include in the graph.

View Pro Enhancement - Added a color box to the selection panel for FFT, Histogram, and Rainflow Histogram charts to help distinguish between selections with the same name.

View Pro Enhancement - Added two menu items, "Check All" and "Uncheck All", to the right click popup menu of the selection panel on the line graph.

View Pro Enhancement - Improved Excel export and added column names.

View Pro Enhancement - Added print/print preview capability for the Hex file viewing window.

View Pro Enhancement - Partial columns can now be added to the XY plot.

View Pro Enhancement - Modified the behavior of the Reset Grid button.

View Pro Bug Fix - Fixed CSIDFT UShort values that were loading incorrectly.

View Pro Bug Fix - Fixed zoom/undo zoom causing graph scale problem for Y Axes

View Pro Bug Fix - Changes to the selection definition made in the Selection Definition dialog are now prompting updates to the associated line graph if there is one.

View Pro Bug Fix - Fixed a problem where graph traces from multiple files didn't show up until scrolling of those files occurred.

View Pro Bug Fix - Zooming and then unzooming on an FFT or Histogram now preserves custom limits set before the zoom.

View Pro Bug Fix - Refreshing a TOA5 file while the graph is open will no longer cause all selections axes to overwrite each other, nor will changing the line graph options or plotting options.

View Pro Bug Fix - Files with an unrecognized file format will now automatically open as text.

View Pro Bug Fix - TOB1 fractional values now shown with sufficient resolution.

View Pro Bug Fix - Made more room for the X Axis on the line graph to prevent labels being cut off.

View Pro Bug Fix - Fixed mixed array data array number parsing problem.

View Pro Bug Fix - Mouse wheel now scrolls the data grid.

View Pro Bug Fix - Fixed column labels for mixed array files where two columns were labeled '[0]'.

View Pro Bug Fix - Changed calculations so that data with NAN values in them can still be made and displayed on the Statistics dialog. These values are marked with an asterisk.

View Pro Bug Fix - Fixed a problem where the line graph number of records was on less than the number of records selected.

View Pro Bug Fix - Fixed timestamp formating problem when generating a timestamp for a mixed array data file with no FSL loaded.

View Pro Bug Fix - Fixed a problem where the line graph plotting for some files caused all of the data to be plotted only in a thin portion on the left side of the screen, leaving a large gap to the right.

View Pro Bug Fix - Fixed a problem where INFs & NANs at beginning of file wouldn't graph.

View Pro Bug Fix - Fixed a problem with opening multiple files from Windows before View Pro is running.

View Pro Bug Fix - Fixed a problem where the "Open FSL File?" dialog was coming up behind View Pro when an array based file was opened from outside of View Pro.

View Pro Bug Fix - Fixed a bug that caused an access violation that occurred with an empty TOB3 file.

View Pro Bug Fix - Removed system tray icons for dialog windows.

View Pro Bug Fix - Using the mouse wheel in the grid will now move the vertical scrollbar rather than the grid "cursor".

View Pro Bug Fix - Fixed issue with ASCII printable files missing the first record in the grid, and mixed array binary files missing the first two records in the grid.

View Pro Bug Fix - Fixed an issue where the last column of a mixed array data file was missing the last column after being associated with an FSL file.

View Pro Bug Fix - Fixed FFT secondary axis access violation issue.

Split Enhancement - Added a progress bar to the runtime.

Split Enhancement - Added the ability to use time ranges in the copy condition.

Split Enhancement - Added new "Time Sync to First Record" option to the Other dialog.

CardConvert Enhancement - Added a command line option to CardConvert.

CardConvert Enhancement - Changed the Source and Destination Filename displays to show long filenames with the '..' in the middle instead of the end. This make it easier to see the actual filename.

CardConvert Enhancement - Changed append file check such that file headers that match with warnings append without asking user. Files with severe warning or errors do not append. Log messages are shown in both cases but the user is not asked.

TroubleShooter Enhancement - When the user left clicks a troubleshooter item, a popup menu is now shown to take the user to Setup Screen or Status Monitor to fix the problem, show help regarding the problem and in some cases fix the problem directly.

Network Planner Enhancement - Support has been added for Campbell Scientific's wireless sensors and wireless sensor base.

Network Planner Enhancement - Added support for the send one way data activity for the CR200 series dataloggers.

Network Planner Enhancement - The "show all links" selection is now persistent in the add peripheral or add station link dialog boxes.

Network Planner Enhancement - The user can now enter "custom" scale factors in the tool bar combo box.

Network Planner Enhancement - The mouse wheel now scrolls the device palette.

Network Planner Enhancement - Added properties to the phone modem to specify whether the modem is a "custom" type and for the user to specify the reset and init string for that modem.

Network Planner Enhancement - A new layer has been added to the drawing canvas that can control whether activity links are drawn between stations. The visibility of this layer is controlled by a new "View" menu item. This layer becomes automatically visible when the activity tool is selected from the toolbar.

Network Planner Enhancement - Added a new sub-menu, "Layers", under the view menu that will allow the user to control whether the background bitmap, station links, and activity links are displayed.

Network Planner Enhancement - Added support for the SC115 device type.

Network Planner Bug Fix - Fixed a bug where Loggernet configuration failed to work when a USB serial port was involved (such as used with the RF430).

Network Planner Bug Fix - Added code to ensure that the baud rate is set appropriately when a USB serial port is used with LoggerNet

Network Planner Bug Fix - Fixed a bug in the generation of settings for the PakBus/TCP server LoggerNet device where, if more than one adjacent PakBus address was marked to have its link maintained, the setting string would come out malformed (it was missing a closing brace).

Network Planner Bug Fix - Fixed a problem where if two loggers were created that were connected via a phone-rf401 link, the Network Planner would erroneously generate a network map that included a PakBus port beneath the remote phone modem for each of the attached loggers

Network Planner Bug Fix - hanged the behaviour of the centering operation so that the zoom factor is calculated so that all of the model stations will appear on the drawing canvas.

Network Planner Bug Fix - Fixed a bug with generating settings for CR10X-PB, CR23X-PB, or CR510-PB loggers where, if neighbour lists were formatted, the trailing zero needed to terminate them was omitted. This could result in subsequent settings not being accepted by the datalogger.

Network Planner Bug Fix - Fixed a bug where, when the CS I/O ME baud rate setting was generated for an RF401 when that device was attached to a CR10X-PB, the generated baud rate was set to 19200 baud rather than 9600 baud.

Network Planner Bug Fix - Fixed a bug for the NL100 where the wrong baud rate value was generated for the RS485 port when the optimal baud rate should have been 38400 baud

Network Planner Bug Fix - Fixed a bug that could result in a crash while dragging a new link between two stations.

PakBus Graph Enhancement - Redesigned the settings editor panel used to edit the settings for PakBus devices.

PakBus Graph Enhancement - Added controls to the toolbar that will allow the user to control the scaling factor for the canvas as a percentage.

Security Manager Enhancement - Passwords are now case sensitive.

Device Configuration Utility Enhancement - Added a new item, "Off-Line Mode" in the file menu that will be enabled for many device types. When the user selects this menu item, the program will enter a session in an off-line mode. The values displayed will be derived summary files stored in the library and referenced in the individual device descriptions.

Device Configuration Utility Enhancement - Support has been added for Campbell Scientific's wireless sensors and wireless sensor base.

Device Configuration Utility Enhancement - Added support for the CS450 device type.

Device Configuration Utility Enhancement - Added stub support files for the CS120

Device Configuration Utility Enhancement - Redesigned the settings editor panel used to edit the settings.

Device Configuration Utility Enhancement - Added code to set the time stamp for spectral or time series data for the AVW2xx when read from the sensor to match the computer time when the measurement began.

Device Configuration Utility Enhancement - Added a button to the AVW2xx diagnosis panel (both on-line and off-line mode) that will allow the user to export the data being displayed in a tab separated file that is suitable for import into MS excel or open office calc.

Device Configuration Utility Enhancement - Added a button on the "Net Services" table of the CR1000/CR3000/CR8xx deployment panel that, when clicked, will bring up a dialog that will allow the user to edit the .csipasswd file on the connected datalogger. If there is no file present, it will create it.

Device Configuration Utility Bug Fix - Fixed a problem with loading an OS to an SDM SIO1.

Device Configuration Utility Bug Fix - Fixed a bug for float and double component types where the max and min values were enforced when they were not specified in the description. This enforcement was not a problem for most types because the default max and min values were set to the full range of a given type. However, for floating point values, the min value was being set to the smallest possible positive value for that type rather than being set to the most negative possible value for that type. The result of this bug was that, when the user attempted to set negative values, these would be rejected.

Device Configuration Utility Bug Fix - Changed the way that locales are managed so that they no longer depend upon the selected language.

Device Configuration Utility Bug Fix - Fixed a bug where the application event dispatcher was being deleted before the one shot timer for the application. This could cause an access violation when the timer attempted to dispatch events when there was no dispatcher.

Device Configuration Utility Bug Fix - Simplified the regular expression used to check the neighbor lists for the various ports on the NL100. The regular expression used previously would fail the check for when used with "1 5 10-20".

Device Configuration Utility Bug Fix - Fixed a bug with string setting components where, if the component value was set directly, the changed flag for that component was not set. This showed up with the CR1000 deployment panel as a failure to set the PakBus/TCP Password setting.

CoraScript Enhancement - Added a new command, make-xml-network-map, with an associated help section. This command can be used to generate an XML structure that describes the current loggernet network map. This structure will include custom phone modems, server settings, devices, device settings, collect areas, and collect area settings.

CoraScript Enhancement - Added an optional parameter, --server-time, to the clock-set command that can be used to specify the time to which the datalogger clock should be set

Data Filer Enhancement - Added the no header format option to the custom collection.

Server Enhancement - Changed the logon transaction so that the password is no longer sent to the server. This fixes an issue where the password was being sent in clear text.

Server Enhancement - Added code to tolerate some warnings that can result from trying to determine whether data can be appended to an existing file. If warnings are generated, these will be logged in the transaction log.

Server Enhancement - Added code that will allow a failure to initialize the TAPI layer to be tolerated. If the tapi layer can not be initialized, all transactions and operations associated with it will now either fail (in the case of dialing) or will return empty lists of tapi lines and/or country codes. This addresses issues that we have encountered with customers being unable to run LoggerNet when the TAPI service is disabled.

Server Enhancement - Added support for a new LgrNet setting, minConfigRewriteInterval, that controls the minimum interval at which the server will automatically attempt to overwrite its configuration file. The default value for this setting has been set to 15 minutes which is larger by a factor of three from the old interval that was used. These changes address complaints from customers with large networks who had observed that the server would appear to "lock up" for up to thirty seconds while the operation was taking place

Server Enhancement - Added code to support the new LgrNet Logon Ex transaction. This transaction should be much more secure than the old logon transaction because the password is not transmitted but rather a digest derived from the password and a server generated random number will be sent. This new transaction uses the same features as the CRAM MD5 authentication protocol used with email servers.

Server Enhancement - Added code to ensure that the sysinifiles directory is backed up when a snapshot is created under the windows version. This will ensure that the taskmaster.ini file as well as other ini files will get backed up and, subsequently, restored.

Server Enhancement - Implemented an optional parameter for the device clock set command that allows the client to specify the time to which the device clock should be set.

Server Enhancement - Added support for the CRS450 device type. This device is a CS450 pressure transducer with datalogger capabilities.

Server Enhancement - Modified the code that records logon attempts in the transaction log so that the IP address of the client is printed along with the application name and user name.

Server Enhancement - Added support for the three new LgrNet settings: applicationDir, workingDir, and dirSeparator.

Server Bug fix - Changed the code that checks the input buffer for a full duplex echo operation so that, if bytes are received but none of these matches the first byte of the echo pattern, these bytes will be read from the buffer, thrown away but the watch dog timer for the operation will not be reset. This has the potential to address a "stuttering" effect that can occur on a link with a lot of latency where the responses from previous communication attempts get processed before the expected response is received.

Server Bug fix - Fixed a bug associated with serial port support (likely TAPI as well) that could lead to a lock-up.

Server Bug fix - Added code to ignore the hangup delay setting on the PakBus port when it is connected through a phone link. This is needed because, once the "off-line" message is sent to the connected logger, the logger is free to shut down the link from its side. It does little good for us to try to maintain that link under these circumstances and has actually caused a crashing/lockup problem.

Server Bug fix - Fixed a bug with the XPB (used with CR10X-PB, CR23X-PB, and CR510-PB loggers) implementation of the program file send transaction where the logger transaction timeout was not cleared after receiving a response to a previous send command. If there was a delay in sending the next command, the transaction could time out.

Server Bug fix - Fixed a bug where, if communications for an RF-TD base became disabled while a send network description operation was active, that operation would not get removed from the base. The result of this bug was that no new network description could be sent thereafter to the RFbase until the loggernet server was shut down.

Server Bug fix - Fixed a bug with the BMP1 send network description operation where, if the operation is interrupted because of max time on-line expiration, the operation reference kept by the RF base device object was not cleared. This prevented any future attempts to send the network description for that device.

Server Bug fix - Changed the server build script for Linux so that the 64 bit file offsets will be used by the run time library rather than the default of 32 bit file offsets.

Server Bug fix - Fixed a potential bug that could occur if a check for duplicate records was posted but then abandoned by its client (the particular case being addressed was data collection), That check would not get removed from the queue of other checks and, as a result, all new records processing would get stuck for this collect area.

Server Bug fix - Added a state to the BMP1 data polling operation to recognize when we are waiting for a check on the newest record. Also added code in the BMP1 message handler that will prevent us from processing an incoming message when we are not in a state where we are looking for that message.

Server Bug fix - Added virtual methods to the base PakBus node class that can be called when messages are sent to start or end a PakBus session. These methods have been overloaded in class Bmp5::Datalogger to ensure that the clock schedule is honored. This addresses a problem that has been observed with various Fat Spaniel customers that can result in their station times being reported as off.

Server Bug fix - Added a new timeout for BMP1 transactions. The timer for this condition starts when a message is posted for a BMP1 transaction to send. It will get cleared when the router is ready to send that message and it will get reset when any other transaction has a chance to send a message. The purpose of this timer is to guard against the rather rare cases where the RF-TD base can get stuck in a mode where it does not ever raise its RxRdy bit.

Server Bug fix - Fixed a problem in the base class that implements the PakBus serial packet protocol where, if communications became disabled, all links were immediately abandoned with no attempt to send "off-line" serial packet messages. On most link types, this was relatively harmless. However, on RF95 type links, this could lead to problems because the datalogger would not drop the CS I/O ME line so the subsequent attempt to "undial" the link was doomed to fail.

Server Bug fix - Fixed a bug where the hangup delay setting was not honoured for the PakBus/TCP server device type.

Server Bug fix - Added an optimization to the code that generates the parts of the configuration XML structure associated with device and collect area settings. The SettingCollection class as well as the Setting class will now cache the XML structure when the settings are read or are generated for the first time. From that time forward, the only parts of the structure that have to be changed are the parts associated with settings that have changed. This has the potential to address a problem where it was taking upwards of 2 minutes to generate the XML structure.

Server Bug fix - Added a optimization with the statistics collections used by devices. Previously, the statistics table name was generated each time that it was needed from the device name and the statistics type name. This could represent a significant CPU load each time that statistics needed to be updated.

Server Bug fix - Added code to the operation in the cache thread that checks for the uniqueness of "new" records received from BMP1 and PakBus dataloggers that will catch any exception thrown during that operation and ensure that the "client" collect area gets the notification that the check is complete. Also added code in this event to post a failure message in the comms logs since otherwise, the error could slip by unnoticed. This may have been the cause of some lockups.

Server Bug fix - Fixed a bug where, if a session was closed on which a clock set transaction was waiting (not yet active), that transaction would not get deleted. The result of this was that, when the clock set was complete, the server would attempt to report the outcome for a transaction and session that was no longer valid. This could lead to a crash

Server Bug fix - Fixed a bug associated with restoring device and collect area settings where, if a setting was not stored in the configuration file when the network map was restored, the cached_xml reference for that setting would not be set when the setting needed to be written. The result of this bug was that, under some conditions, attempts to save the network map would fail.

Server Bug fix - Fixed a bug in the CoraServer destructor that would throw an exception resulting in a Linux segment violation when the server was not startable (this was due to a file write permissions error in one test case but can also be due to exceeding file system quotas).

Server Bug fix - Fixed a bug where automated clock check/sets were not working for NTCIP-ESS type devices.

Server Bug fix - Added code in the link failure event handler for the root level device class (serial ports, TCP serial ports, etc.) to avoid calling on_link_failure() or changing the line state if an open is pending. This code was already setting a one second timer following which it would report an open failure (this delay was to avoid resource exhaustion that could occur under some race conditions). If another request was made while the delay was pending, that second open attempt could get prematurely clobbered when the timed failure event was handled.