18549
18549
OrderableCC Camera or PWD22 Mounting Kit
Overview
Typically, the 18549 kit is used to mount a CC5MPX, CC5MPXWD, or CCFC camera onto a CM202, CM203, CM204, or CM206 crossarm. The crossarm then attaches to a tripod, tower, or pole. This kit can also be used to mount the 18543 CC640 Camera Enclosure or PWD22 Present Weather Sensor (manufactured by Vaisala) to a crossarm.
The 18549 can be used to mount a pipe with a maximum OD of 1.5 in.
Key Advantages
Specifications
- Dimensions
- 15.24 x 16.51 x 8.89 cm
(6.0 x 6.5 x 3.5 in.)
- Weight
- 430.9 g
(0.95 lb)
Replacement Parts
(8)4366
Stainless-Steel Lock Washer 5/16
The 4366 may be purchased to replace a lost or damaged lock washer.
Orderable4365
Stainless-Steel Flat Washer 5/16
The 4365 may be purchased to replace a lost or damaged washer.
Orderable17446
Stainless-Steel U-Bolt Screw 5/16-18 x 1.500 with Silicon Bronze Nuts
The 17446 provides a U-bolt and two nuts as a replacement for the original U-bolt and nuts.
Orderable18535
Screw M4 x 12 mm Hex Socket
Three of these screws are shipped with the 18549 CC640 Enclosure Mounting Kit. The screws are used when the bracket supports an R2S Radar Sensor (manufactured by Lufft) instead of the CC640 camera. The 18535 may be purchased to replace a lost or damaged screw.
Orderable18534
6 mm Flat Washer
Four of these washers are shipped with the 18549 CC640 Enclosure Mounting Kit. The washers are used when the bracket supports a PWD22 Present Weather Sensor (manufactured by Campbell Scientific Ltd.) instead of the CC640 camera. The 18534 may be purchased to replace a lost or damaged washer.
Orderable18532
Screw M6 x 18 mm Hex Socket
Four of these screws are shipped with the 18549 CC640 Enclosure Mounting Kit. The screws are used when the bracket supports a PWD22 Present Weather Sensor (manufactured by Campbell Scientific Ltd.) instead of the CC640 camera. The 18532 may be purchased to replace a lost or damaged screw.
Orderable5226
Screw 1/4-20 x .500 Cap Hex Grade 5
Two of these screws are shipped with the 18549 CC640 Enclosure Mounting Kit. The 5226 may be purchased to replace a lost or damaged screw.
Orderable5428
Stainless-Steel Flat Washer 1/4
Two of these washers are shipped with the 18549 CC640 Enclosure Mounting Kit. The 5428 may be purchased to replace a lost or damaged washer.
Orderable
Ships With
(7)
Similar Products
(1)
Compatibility
The CC5MPX and CC5MPXWD cameras fastens directly to the 18549 mounting bracket.
The 18543 CC640 Camera Enclosure fastens to this enclosure; the CC640 must be housed in an environmentally sealed enclosure to protect it from moisture or high humidity.
This kit can also be used to mount the PWD22 Present Weather Sensor (manufactured by CSL) onto a crossarm.