DustVue 20
DustVue 20
OrderableSolar-Module Soiling Sensor with a Full-Size PV Module Using Maximum Power Method
Pricing
Request a quote Have pricing access? Sign in
- Model:
- DustVue 20
- Item Number:
- 42882
- Warranty:
- 2 years
Overview
The DustVue™20 takes the innovative design of the DustVue 10 one step further by combining with the soiling loss measurement on an isolated, full-production-size PV panel using the maximum power method. While this is a powerful sensor solution, the DustVue 20 is compact and virtually maintenance free with no water needed for cleaning.
Note: Any images with the DustVue 20 shown mounted feature items that are sold separately.
Key Advantages
with a full-size PV module
Technical Description
Understand your losses due to soiling.
Accurate PV Module Soiling Loss Measurement
Accumulated dust, snow, and contaminants significantly reduce photovoltaic (PV) power output, ranking as the second most critical factor after irradiance in solar plant performance losses. The DustVue 20:
- Provides the most accurate measurement of PV module soiling.
- Requires minimal maintenance.
- Incorporates a revolutionary and convenient design.
Precision and Reliability in Soiling Measurement
The DustVue 20 accurately calculates soiling loss by comparing irradiance between the clean reference sensor and soiled detector. The clean reference sensor is kept clean within a dust-free housing that briefly opens at a cadence you select, and only when conditions are ideal to minimize reference sensor soiling. This reduces the need for reference sensor cleaning to semiannually, and the soiling reference sensor cleaning can coincide with the periodic cleaning of all your plant panels.
The DustVue 20 employs a full-size PV module as the test device, calculating soiling loss via comprehensive IV curve measurements per IEC 61724-1 standards. This approach ensures accurate determination of maximum power and precise quantification of losses.
Advanced Technology for Comprehensive Insights
Integrated sensors measure ground-reflected light, allowing precise calculation of rear-side soiling losses. The DustVue 20 uniquely measures front-side, rear-side, and cumulative soiling losses. This makes it the most inexpensive choice for bifacial PV module installations.
Designed for Simplicity and Accuracy
The DustVue 20 is delivered field-ready, requiring no programming:
- Simple installation within minutes on the same racking as operational modules
- Intuitive configuration via web-based user interface accessible through USB-C
- Scheduled daily calculations of soiling-loss indices with built-in data filtering for accuracy and reliability
- Automated infield calibration between the clean and soiled cells.
Exceptional Low-Maintenance Operation
- Anticipated semiannual, or less, maintenance schedule significantly reduces operational costs.
- No water or frequent intervention is needed.
Seamless SCADA Integration and Superior Support
The DustVue 20 supports direct SCADA integration with Modbus RTU over RS-485 and offers robust industrial Class 4 surge protection. Campbell Scientific's unmatched global customer support and trusted engineering legacy assure consistent performance and reliability.
Benefits
- Highly accurate soiling measurement (±1% uncertainty)
- Bifacial, separate soiling ratios for front and rear
- Maintenance-free design (patent pending)
- Pmax option for soiling measurement according to IEC 61724-1
- Easy-to-install design to reduce deployment complexity
- Best spectral match with production modules
- Rugged reliability with industrial-grade surge protection
- Industry-standard Modbus RTU over RS-485
Specifications
- Input Power
- 12 to 32 V
- Typical Power
- 2 W steady state
Common Accessories
(4)RS485CBL
Five-Conductor Cable with M12 Five-Pin A-Coded Connector
The RS485CBL cable uses a five-conductor shielded cable with an M12 five-pin A-coded connector. The cable has a UV-resistant, polyurethane jacket. The RS485CBL has been custom designed for sensors that use the RS-485 Modbus protocol with integrated power and signal lines. The signal lines have twisted pairs with 24-gauge conductors, and the power lines have a heavier 20-gauge wire, making the cable uniquely suitable for sensors with a higher current draw that have either short or long runs. An aluminum Mylar shield is grounded via a drain wire and connected to the M12 nut.
Orderable43591
Offset Torque Tube Mounting Kit for DustVue
The 43591 kit is used to mount a DustVue™10 or 20 sensor to a single-axis tracker torque tube. With the kit, you can mount your DustVue in the plane of array with your existing solar panels. The 43591 kit allows the DustVue to be offset from the torque tube for downward-facing soiling measurement clearance. There is some course adjustability to level the DustVue or to adjust the unit as close as possible to the plane of the solar modules.
Orderable43592
Unistrut Mounting Kit for DustVue
The 43592 is a generic kit used to mount a DustVue™10 or 20 sensor to a flat surface, Unistrut, or crossarm. The kit has slots to accommodate 5/16 in. hardware and comes with hardware for mounting to 1-5/8 in. wide Unistrut. Two 1.5 in. U-bolts are also included for mounting to a standard Campbell Scientific 1 in. NPS (1.315 in. OD) crossarm.
Orderable44672
DustVue Crossarm Mounting Kit
The 44672 DustVue™ Crossarm Mounting Kit enables secure parallel mounting of the DustVue 10 and DustVue 20 to a crossarm. The kit provides a standardized mounting solution for crossarm installations, increasing deployment options for a wider range of site configurations.
Orderable
Ships With
(5)- CS241-QD CS241 PT1000 Class A, Back of Module Temperature Sensor Head (-40 to +150C) 6m (20ft) -QD w/Quick Disconnect Connector
- CS241QD Calibration Sheet
- Certificate of Conformance for DustVue™20 Unit
- CON CIR MC4 Plug 10-12 AWG 1500 V
- CON CIR MC4 Socket 10-12 AWG 1500 V
Related Resources
Documents
- Brochure
DustVue 20 Solar-Module Soiling Sensor with a Full-Size PV Module
March 2026
View Document - Manual
DustVue 20 Solar-Module Soiling Sensor with a Full-Size PV Module
November 2026
View Document - Manual
DustVue 20 Quick Deploy Guide
October 2026
View Document - Manual
DustVue 20 Solar-Module Soiling Sensor with a Full-Size PV Module (online)
November 2026
View Document