44375
44375
OrderableGeneric Solar Panel Mounting Kit for the CM400
Overview
The 44375 is a solar panel mounting kit you can use for mounting a wide range of locally sourced and differently sized solar panels to the CM400 Pile Mount Tower. The CM400 is a lattice tower often used with the SunSentry Solar Operational Meteorological Monitoring Station.
Technical Description
The 44375 mounting kit ships with enough hardware to mount either two smaller solar panels or one larger solar panel. Remember to account for the nominal voltage of the solar panel(s) you are using because the SunSentry is a 24 Vdc nominal system. Consequently, you will need to either use two 12 Vdc nominal solar panels in series or a single 24 Vdc nominal panel with the SunSentry.
Benefits
- Ideal for international use with locally sourced components
Ships With
(1)
Similar Products
(1)
Compatibility
The 44375's solar panel clamp attaches a C-shaped frame-type solar panel to the mounting arm on the backside lip of the C-frame. Therefore, the solar panel should have an accessible small flat surface on at least two sides to clamp the panel to the frame.
The arms of the 44375 mounting kit are 43.18 cm (17 in.) apart from outside face to outside face. Therefore, the solar panel must be at least 43.18 cm (17 in.) along the dimension that will lay across the arms. The solar panel cannot be larger than 119.38 cm (47 in.) along the dimension that is parallel to the mounting arms.