33815
33815
OrderableSDI-12 Terminal Bus Kit
Overview
The SDI-12 Terminal Bus Kit (pn 33815) makes it easier for you to connect wires from multiple SDI-12 sensors into one set of terminals on a data logger. The 33815 uses six DIN-rail mountable (pn 27479) 6-wire terminal blocks. The 33815 jumpers two connectors together at a time (pn 32918). This setup allows up to 11 SDI-12 sensors to be connected to one set of terminals on a data logger.
Specifications
- Weight
- 204.12 g
(0.45 lb)
Replacement Parts
(5)505
Screw #6-32 x .375 Pan Phillips
These screws, along with the 6044 grommets, are commonly used together to secure our equipment.
Orderable6044
Grommet for #6 or #8 Screw
These grommets are commonly used with the 505 screws to secure our equipment.
Orderable21203
Stainless-Steel #6 Fender Washer
The 21203 may be ordered to replace a lost or damaged washer.
Orderable27479
DIN Rail Mountable 6-Wire 5.2 mm Spring-Loaded 3-Tier Connector
The 27479 is a DIN-rail mountable terminal connector that can be used between sensors (or other devices) and a data logger.
Orderable32918
Jumper for 27479 DIN-Rail Connector
The 32918 is a jumper for use with the 27479 DIN-rail mountable terminal connector to make your wiring easier.
Orderable
Ships With
(7)505
Screw #6-32 x .375 Pan Phillips
OrderableQty 26044
Grommet for #6 or #8 Screw
OrderableQty 221203
Stainless-Steel #6 Fender Washer
OrderableQty 2- Labeled Label CarriersQty 3
- 3 ft of Red Wire with Ferrule on Both Ends
- 3 ft of Black Wire with Ferrule on Both Ends
- 3 ft of White Wire with Ferrule on Both Ends
