29354
29354
OrderableWi-Fi Kit for ET Stations
Overview
Intended for our ET107 stations, the 29354 is a wireless networking peripheral that provides Wi-Fi connectivity over standard 802.11b/g/n networks. It is a low-power device that offers unique and powerful PakBus networking capabilities, but it is easy to configure.
The 29354 includes a wireless network link interface.
Key Advantages
Technical Description
The 29354 can take advantage of the thousands of Wi-Fi hotspots available in cafés, universities, hotels, and airports. Wi-Fi also provides encryption to protect traffic and uses a global set of standards so the same device can be used internationally.
The 29354 is an industrial Wi-Fi kit that goes beyond the typical Wi-Fi serial device server. It supports Wi-Fi communication with an iOS or Android device when used with our LoggerLink apps. The 29354 provides:
- M2M communication of data and events
- PakBus communication over TCP/IP for remote configuration, control, and data collection
- HTTP and FTP for posting, retrieving, and local hosting of data
- Email client for data and control messaging
- ModBus TCP/IP, DNP3, and NTCIP ESS industrial protocol support
Benefits
- Low power consumption
- Can be configured to bridge Ethernet and CS I/O communications
- Has CS I/O, RS-232, and USB ports
Specifications
- Compliance
- CE Compliant
- Material
- Aluminum case with black anodized finish
- Configuration
- Device Configuration Utility over USB or Wi-FiTerminal menu over TelnetTerminal menu over RS-232
- CS I/O Port
- SDC 7, 8, 10, or 11
(Does not support ME.)
- RS-232 Port
- DTE, DB9 Male
- USB Port
- Micro-B
- Operating Temperature Range
- -25° to +50°C
(standard)
- Connections/Routes Supported
- Supports 20 simultaneous TCP connections.Up to 10 of the 20 TCP connections can be used for TLS.PakBus Router supports 50 routes.15 Modbus server transactions
(maximum)
- Dimensions
- 16 x 6.73 x 2.54 cm
(6.3 x 2.65 x 1 in.)
- Weight
- 177 g
(6.3 oz)
Communication Rate
- RS-232 Port
- 1200 to 115.2k bps
- CS I/O Port
- 9600 to 460.8k bps
WLAN
- Antenna Connector
- RPSMA
- Supported Technologies
- 802.11b/g/n, WPA, WPA2 /TKIP or AES, WEP, WEP(open), APIPA/AutoIP, IPv4, IPv6, ICMP/Ping, ICMPv6/Ping, TCP, DHCP Client, SLAAC, DNS Client, HTTPS Proxy, Telnet Server, TLS, PakBus, Modbus, TCP/IP
- Topologies
- Infrastructure and ad-hoc
- Transmit Power
- 7 to 17 dBm
(5 to 50 mW)
- Rx Sensitivity
- -97 dBm
(< 8% PER)
- Frequency
- 2.4 to 2.5 GHz
(2.4 GHz ISM band)
Power
- Power Connector
- CS I/O Port
(not powered over USB)
- Supply Voltage
- 7 to 20 Vdc
Power Consumption
- Maximum
- 950 mW
- Typical (Always On)
- 600 mW
(idle)
670 mW(communicating)
65 mW(searching for out-of-range network)
- Typical (Low Power Mode Enabled)
- 73 mW
(idle)
480 mW(communicating)
50 mW(searching for out-of-range network)
- Sleep
- 16 mW
Common Accessories
(2)30411
2.4 GHz 5.8 dBd Omnidirectional Fiberglass Antenna without Mounting Hardware
The 30411 is a 5.8 dBd omnidirectional antenna for use with our 2.4 GHz spread-spectrum products. The 30411 is suitable for base-station use where communication is needed with multiple stations located in different directions. It is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line of sight.
Orderable16755
2.4 GHz 13 dBd Yagi Enclosed Antenna with Mounting Hardware
The 16755 is a high-gain (13 dBd), directional (Yagi) antenna used with our 2.4 GHz radio transceivers. It is intended for longer distances, and for communicating to one other station (due to narrow beam width).
Orderable
Replacement Parts
(9)29353
NL240 to ET Enclosure Antenna Cable, 14 inches
The 13 in. cable of the 29353 is used between the NL240 antenna connector and the BNC bulkhead connector on the inside of the enclosure.
Orderable14241
Antenna Cable for ET Stations, 59 in.
This antenna cable connects the field site's antenna to the radio. It has a 59 inch length.
Orderable27555
USB 2.0 Cable, Type A Pin (Male) to Micro B Pin (Male), 6/6.5 ft
The 27555 is a USB Type A to Micro B, pin (male)-to-pin (male) cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
Orderable18290
ET Antenna Adjustable-Angle Mounting Bracket
The 18290 Adjustable Inclination Mount secures the antenna to the ET107's pole.
Orderable17592
14.5 in. Cable Tie, UV Resistant
A connection is made by pulling the tapered end through the locking end, thus forming a loop. The free end is pulled tight to secure the cables, then trimmed back to the locking end. Once attached, the cable tie must be cut to be removed.
Orderable17851
U-bolt with Saddle Bracket and 2 Nuts
The 17851 consists of one saddle bracket, one U-bolt, and two nuts.
Orderable4366
Stainless-Steel Lock Washer 5/16
The 4366 may be purchased to replace a lost or damaged washer.
Orderable4365
Stainless-Steel Flat Washer 5/16
The 4365 can be purchased to replace a lost or damaged washer.
Orderable17492
Stainless-Steel U-Bolt Screw 5/16-18 x 2.125 with 2 Silicon Bronze Nuts
The 17492 provides a 5/16" U-bolt and two nuts.
Orderable
Ships With
(10)14241
Antenna Cable for ET Stations, 59 in.
Orderable17851
U-bolt with Saddle Bracket and 2 Nuts
Orderable27555
USB 2.0 Cable, Type A Pin (Male) to Micro B Pin (Male), 6/6.5 ft
Orderable29353
NL240 to ET Enclosure Antenna Cable, 14 inches
Orderable17592
14.5 in. Cable Tie, UV Resistant
OrderableQty 417492
Stainless-Steel U-Bolt Screw 5/16-18 x 2.125 with 2 Silicon Bronze Nuts
Orderable4365
Stainless-Steel Flat Washer 5/16
OrderableQty 44366
Stainless-Steel Lock Washer 5/16
OrderableQty 418290
ET Antenna Adjustable-Angle Mounting Bracket
OrderableNL241
Wireless Network Link Interface
Orderable
Compatibility
The 29354 is compatible with the ET107 Evapotranspiration Monitoring Station.
Software
The Device Configuration Utility must be version 2.03 or higher.
Note: The data logger OS must be OS 25 or higher for bridge mode applications.