One 6832 filter may be installed in one of the small compression fittings (cable entry seals) in an enclosure to allow air pressure to equalize between the inside and outside of the enclosure. As such, the filter is used only when the cable entry seals option is selected for the enclosure. The filter is typically used when a barometric pressure sensor (or, in some cases, the cable termination of a vented submersible pressure transducer) will be located inside the enclosure.
|Pore Size||60 micron|
|Diameter||~0.635 cm (~0.25 in.)|
|Length||1.96 cm (0.77 in.)|
|Weight||4.54 g (0.01 lb)|