Product Details
Typically Ships Within 0 - 7 Days
Restockable Yes
Warranty 1 year
Compliance –

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 19467 Strike Guard Lightning Detector Mounting Kit

The SG000 must be sold with a CS110.

Common Accessories

FC100
FC100 Fiber Optic Converter
 
show details
The FC100 is required to interface the SG000 with a Campbell Scientific datalogger, the CS110, or computer.
14291
14291 Field Power Cable 12Vdc Plug to Pigtail, 2ft
 
show details
The 14291 power cable allows the FC100 to be powered from a suitable 12 Vdc battery.
18663
18663 Null Modem Cable 9-Pin Male to Male, 1ft
 
show details
The 18663 is a 9-pin to 9-pin null modem cable used to connect the FC100 to the datalogger's RS-232 port.
CS110CBL1-L
CS110CBL1-L
 
CS110CBL1-L CS110 RS-232 (DTE) Cable w/Null Modem Cable
 
show details
The CS110CBL1 RS-232 cable is used to connect the FC100 to the RS-232 port of the CS110 Electric Field Meter. Typical cable length is 9 ft.
Cable Length - show details
-L ft per cable

Allowed values: 1-50 ft, increments of 1 ft

The CS110CBL1's cable length may range from 1 to 50 feet (0.3 to 15 m); a 10 ft (3 m) cable length is recommended for most applications. The controlling factor will be the distance that the CS110 is located from either the laptop or telecommunication peripheral. This distance will be largely determined by the desired deployment heights of the various components and the physical size of the tower, tripod, or pole on which the system is deployed.
CS110CBL2-L
CS110CBL2-L
 
CS110CBL2-L CS110 CS I/O Cable
 
show details
The CS110CBL2 CS I/O cable is used to connect the FC100 to the CS I/O port on the CS110 Electric Field Meter. The SC932A (see below) is also required. Typical cable length for the CS110CBL2 is 9 ft.
Cable Length - show details
-L ft per CS I/O cable

Allowed values: 1-50 ft, increments of 1 ft

The CS110CBL2's cable length may range from 1 to 50 feet (0.3 to 15 m); a 10 ft (3 m) cable length is recommended for most applications. The controlling factor will be the distance that the CS110 is located from either the laptop or telecommunication peripheral. This distance will be largely determined by the desired deployment heights of the various components and the physical size of the tower, tripod, or pole on which the system is deployed.
SC932A
SC932A CS I/O to 9-Pin RS-232 DCE Interface
 
show details
The SC932A 9-Pin to 9-Pin RS-232 Interface is used to connect the FC100 to the CS I/O port of a datalogger or the CS110. The CS110CBL2 cable (see above) is also required to connect the SG000 to the CS110's CS I/O port.
16987
16987 Peripheral Mounting Kit
 
show details
The 16087 provides hardware for affixing an SC932A to an enclosure backplate.
FC100CBL1-L
FC100CBL1-L
 
FC100CBL1-L Simplex PMMA Plastic Fiber Optic Cable
 
show details
The FC100CBL1 is a simplex PMMA plastic fiber optic cable that connects the FC100 to the SG000.
Cable Length - show details
-L ft per cable

Allowed values: 10-325 ft, increments of 1 ft

Minimum cable length is 10 ft. Maximum cable length is 325 ft.

Replacement Parts

19467 Strike Guard Lightning Detector Mounting Kit
 
show details
This kit allows the SG000 Strike Guard Lightning Detector to be attached to a tripod mast or pole along with the CS110 Electric Field Meter.

Services

32500 SG000 Basic Factory Service
 
show details
Basic factory service for the Strike Guard Lightning Sensor includes the following: replacement of the internal lithium batteries, replacement of the desiccant, a new fiber-optic transmitter, a new optical diffuser, and firmware updates to the latest factory standard. A basic factory service is recommended every three to four years from the time of purchase or the last factory service. More frequent service is recommended for high humidity and high salt spray (coastal) environments. An RMA (Returned Material Authorization) is required.