Product Details
Typically Ships Within 7 - 14 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

CABLE5CBL-L
 
CABLE5CBL-L 5-Conductor 22AWG Cable w/Drain
 
This cable connects the SDM-CD16S to the datalogger. The CABLE5CBL-L is a 22 AWG, five conductor cable with a Santoprene® jacket and an aluminum mylar shield. A 1-ft cable length should be sufficient when both datalogger and SDM-CD16S are housed within an ENC12/14 enclosure; a 2-ft length may be required if the datalogger and SDM-CD16S are housed at opposite ends of an ENC16/18 enclosure.

CRBasic dataloggers should use the SDMSpeed instruction if the cable length is longer than 20 ft. The maximum recommended length for the CR7 is 600 ft. For other Edlog dataloggers, the maximum recommended cable length is 20 ft.
CABLE5CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
8125
 
If not ordering the datalogger on the same order, you might need this small, flat-bladed screwdriver. The 8125 is extremely useful for opening the guillotine terminals on this module. The blade is 2.5 mm across and the untapered shaft length is 50 mm. The handle has an approximate length of 9 cm, and features a rotating end-cap that makes the screwdriver easy to rotate.

Replacement Parts

3671
 
The 3671 is a user-replaceable SLO-BLO 3AG, 10.0 A fuse contained in the SDM-CD16S.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.