PS24
 
PS24 24Ah Power Supply w/10 x 12 Enclosure
 
Charging Regulator Option
-NC -NC No Charging Regulator
-C1 -C1 w/CH150
-C2 -C2 w/CH200
Enclosure Mounts Option
-NM -NM No Enclosure Mounting
-MM -MM Tripod Mast Mounting
-LM -LM CM1xx Leg Mounting
-TM -TM Tower Mounting
-PM -PM Pole Mounting, 4-10in
-EM -EM ET Pole Mounting, 3in

Add to your Quote List


Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 10075 BP24 24 Ah 12 V Sealed Rechargeable Battery without Mounting Hardware
(1) 7363 Enclosure Supply Kit, Standard Size

Common Accessories

29796
 
29796 Power Supply 24Vdc 1.67A Output, 100-240Vac 1A Input, 5ft Cable
 
The 29796 converts 100 to 240 Vac to a regulated 24 Vdc. It comes standard with a USA/Canada plug, with an option to add a kit for international use. The cable has 5 ft length and terminates in pigtails with "+" and "-" labels.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs
SP10
 
SP10 10W Solar Panel, 20ft Cable
 
The SP10 solar panel provides a 10 W maximum peak power, 9 W guaranteed minimum power, 0.59 A current at peak, and 16.8 V voltage at peak.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a pre-wired enclosure.
-C -C w/ ET/CS110 Connector
With the -C option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station. This is equivalent to the -LC version available for some sensors.
Mounting Options - show details
-SM -SM Std Mounting Kit
Standard mounting to allow solar panel to be mounted directly to the leg of a tower or crossarm.
-EM -EM Extended Mounting Kit
Extended Mounting Kit allows the solar panel to be mounted on a tower or crossarm that puts the panel approximately 25.4 cm (10 in.) from the mast. This reduces shadows on the solar panel from other components or guy wires, which negatively affects the performance of the solar panel. It does, however, increase the wind load on the system.
SP20
 
SP20 20W Solar Panel, 15ft Cable
 
The SP20 solar panel provides a 20 W maximum peak power, 18 W guaranteed minimum peak power, 1.19 A current at peak, and 16.8 V voltage at peak.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a pre-wired enclosure.
Mounting Options - show details
-SM -SM Std Mounting Kit
Standard mounting to allow solar panel to be mounted directly to the leg of a tower or crossarm.
-EM -EM Extended Mounting Kit
Extended Mounting Kit allows the solar panel to be mounted on a tower or crossarm that puts the panel approximately 25.4 cm (10 in.) from the mast. This reduces shadows on the solar panel from other components or guy wires, which negatively affects the performance of the solar panel. It does, however, increase the wind load on the system.
22110
 
22110 Power Supply 24VdC 1.67A Output, 100-240Vac 1A Input for PW Systems
 
This wall charger is used with our pre-wired enclosures. On one end, the 22110 has a plug that inserts into an ac wall socket and on the other end, it has a connector that attaches to the pre-wired enclosure. The 22110 outputs 24 Vdc @ 1.67 A and accepts 100 to 240 Vac.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs

Replacement Parts

4419
 
The 4419 helps hold the PS24 in place.
5449
 
The 5449 ground lug is attached to the enclosure. It may be purchased to replace a lost or damaged ground lug.
23
 
The pn 23 nut is available as a replacement item.
10075
 
The 10075 provides the sealed rechargeable battery, but without the mounting hardware that attaches the battery to an enclosure backplate (see below). This product should be selected when a replacement battery is required, an enclosure will not be used, or you intend to use a custom mount.
7363
 
The enclosure supply kit includes desiccant, a humidity indicator card, cable ties, wire tie tabs, putty for sealing the conduit, and screws and grommets for attaching peripherals to the enclosure backplate.
560
 
The 560 screw is used to attach a backplate to the inside of an enclosure.