22238 PS200 12V Power Supply w/Charging Regulator (-40 to +60C) w/No Battery
 
Warranty Lengths - show details
-SW -SW Standard 1yr Warranty
At the time of purchase, the 22238 includes a standard warranty of 12 months. See our full warranty policy in the PS200/CH200 manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our extended warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be added later. Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.

Add to your Quote List


Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 28490 Red Wire and Black Wire Power Cable Set
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

A100
 
A100 Null Modem Adapter for PS1X0/200 or CH1X0/200
 
Can use Only 1 Adapter at a time
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension
A105
 
A105 12V Terminal Expansion Adapter for PS1X0/200 or CH1X0/200
 
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension
20769
 
The 20769 is the 2-ft cable used to connect the SDI-12 terminal on the 22238 to the datalogger's terminals. A datalogger connected to the SDI-12 terminal of a 22238 can receive its charging, load, battery voltage and current information.
20770
 
The 20770 is a 6-ft cable that connects a 22238 to a computer. The 22238 needs to be connected to a computer to change settings or to download a new operating system.
25356
 
The 25356 is the 2-ft cable used to connect the RS-232 terminal on the 22238 to the datalogger's terminals. A datalogger connected to the RS-232 terminal of a 22238 can receive its charging, load, battery voltage and current information.
6186
 
The 6186 connects the 22238 to an external 12-V flooded battery such as a deep-cycle marine or RV battery.
29796
 
29796 Power Supply 24Vdc 1.67A Output, 100-240Vac 1A Input, 5ft Cable
 
The 29796 converts 100 to 240 Vac to a regulated 24 Vdc. It comes standard with a USA/Canada plug, with an option to add a kit for international use. The cable has 5 ft length and terminates in pigtails with "+" and "-" labels.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs
SP10
 
SP10 10W Solar Panel, 20ft Cable
 
The SP10 solar panel provides a 10 W maximum peak power, 9 W guaranteed minimum power, 0.59 A current at peak, and 16.8 V voltage at peak.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a pre-wired enclosure.
-C -C w/ ET/CS110 Connector
With the -C option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station. This is equivalent to the -LC version available for some sensors.
Mounting Options - show details
-SM -SM Std Mounting Kit
Standard mounting to allow solar panel to be mounted directly to the leg of a tower or crossarm.
-EM -EM Extended Mounting Kit
Extended Mounting Kit allows the solar panel to be mounted on a tower or crossarm that puts the panel approximately 25.4 cm (10 in.) from the mast. This reduces shadows on the solar panel from other components or guy wires, which negatively affects the performance of the solar panel. It does, however, increase the wind load on the system.
SP20
 
SP20 20W Solar Panel, 15ft Cable
 
The SP20 solar panel provides a 20 W maximum peak power, 18 W guaranteed minimum peak power, 1.19 A current at peak, and 16.8 V voltage at peak.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a pre-wired enclosure.
Mounting Options - show details
-SM -SM Std Mounting Kit
Standard mounting to allow solar panel to be mounted directly to the leg of a tower or crossarm.
-EM -EM Extended Mounting Kit
Extended Mounting Kit allows the solar panel to be mounted on a tower or crossarm that puts the panel approximately 25.4 cm (10 in.) from the mast. This reduces shadows on the solar panel from other components or guy wires, which negatively affects the performance of the solar panel. It does, however, increase the wind load on the system.
22110
 
22110 Power Supply 24VdC 1.67A Output, 100-240Vac 1A Input for PW Systems
 
This wall charger is used with our pre-wired enclosures. On one end, the 22110 has a plug that inserts into an ac wall socket and on the other end, it has a connector that attaches to the pre-wired enclosure. The 22110 outputs 24 Vdc @ 1.67 A and accepts 100 to 240 Vac.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs

Other Accessories

17200
 
The 17200 cable connects the 22238 to its 7 Ahr sealed rechargeable battery.
A100
 
A100 Null Modem Adapter for PS1X0/200 or CH1X0/200
 
The A100 adapter attaches to the 22238 to provide a null modem connection. This functionality is required in a station where a datalogger will not be present, such as a phone-to-RF base station.

Please note that only one A100 or A105 can be used at a time.
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension
A105
 
A105 12V Terminal Expansion Adapter for PS1X0/200 or CH1X0/200
 
An A105 adapter connected to the 22238 provides four additional 12 V terminals and four additional ground terminals. The extra terminals may make it easier for the customer to wire multiple continuously powered 12 Vdc devices to the power supply.

Please note that only one A100 or A105 can be used at a time.
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension

Replacement Parts

 
The 9635 is the red wire used to connect the 22238 to the 12V power terminal on the datalogger. A 1-ft length of this wire is shipped with the 22238. The per foot price is listed.
 
The 9634 is the black wire used to connect the 22238 to the power ground on the datalogger. A 1-ft length of this wire is shipped with the 22238. The per foot price is listed.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
28490
 
The 28490 includes two wires—one red and one black. These wires differ only in their insulation color; they have the same same length (1 ft) and gage (18 AWG). The red and black wires are used to connect a Campbell Scientific power supply to a datalogger.