CSAT3B
 
CSAT3B 3-D Sonic Anemometer w/Integrated Electronics
 
Carrying Case Option - show details
-NC -NC No Carrying Case
Choose this option if you do not want a CSAT3B Sonic Anemometer carrying case.
-SC -SC Sonic Carrying Case
Choose this option if you do want a CSAT3B Sonic Anemometer carrying case.

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 30179 USB Data Cable, Type A Male to Type Mini-B Male, IP68, 5 m
(1) CM250 Leveling Mounting Kit
(1) 30749 CSAT3B Replacement Desiccant
(1) 29191 CSAT3B Foam Case Set
(1) Certificate of Conformance

Common Accessories

CSAT3BCBL1-L
 
CSAT3BCBL1-L CSAT3B Power/SDM Cable
 
The Power/SDM cable CSAT3BCBL1-L is used to deliver power and SDM communications to a CSAT3B.
CSAT3BCBL1-L Options - show details
-L ft per sensor cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-MC -MC w/M16 IP68 Connector
CSAT3BCBL2-L
 
CSAT3BCBL2-L CSAT3B Power Only Cable
 
The Power-Only cable CSAT3BCBL2-L is used to deliver power to a CSAT3B that will use CPI, USB, or RS-485 communications instead of SDM communications.
CSAT3BCBL2-L Options - show details
-L ft per sensor cable

Allowed values: 1-550 ft, increments of 1 ft

Although the maximum cable length is 550 feet, anyone requiring a cable length of 401 to 550 feet should use a 24 V power supply.
Cable Termination Options
-PT -PT w/Tinned Wires
-MC -MC w/M16 IP68 Connector
CSAT3BCBL3-L
 
CSAT3BCBL3-L CSAT3B CPI/RS-485 Cable
 
The CPI/RS-485 cable CSAT3BCBL3-L is used to deliver CPI or CPI communications between a CSAT3B and a datalogger, another CSAT3B, or a wiring hub.
CSAT3BCBL3-L Options - show details
-L ft per sensor cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-RJ -RJ w/RJ45 Connector
-MC -MC w/M16 IP68 Connector
30293
 
The 30293 Power/SDM Splitter is used to daisy-chain multiple CSAT3B anemometers in series. For a daisy-chain of CSAT3B anemometers using communications other than SDM (i.e., CPI or RS-485), the 30294 CPI/RS-485 Splitter is also required.
30294
 
The 30294 CPI/RS-485 Splitter is used to daisy-chain multiple CSAT3B anemometers using CPI or RS-485 communications in series. The 30293 Power/SDM Splitter is also required.
32473
 
The 32473 compensates for power droop on a long cable and/or when daisy-chaining multiple CSAT3B anemometers.

Campbell Scientific recommends the application of a 32473 plug when a user is using multiple CSAT3Bs or is using a single unit on a very long lead (for example, greater than 99.97 m [328 ft]). The plug requires the 30293 power/SDM cable splitter to connect to the CSAT3B and the power cable simultaneously.
10080
 
The 10080 is a thermocouple cover for the CSAT3's FW05 connector.
FW05
 
Measures atmospheric temperature gradients or fluctuations with research-grade accuracy.
FW/ENC
 
Protects thermocouples during shipping and transport.
FWC-L
 
FWC-L Connector Cable for Fine Wire TCs
 
Connects a fine-wire thermocouple to a datalogger.
Cable Length - show details
-L ft cable per sensor

Allowed values: 1-1000 ft, increments of 1 ft

A 20 ft lead length (FWC-L20) is recommended for most applications.
31423
 
The 31423 is required to make the fine-wire thermocouple assembly compatible with the CSAT3B.

Other Accessories

HUB-SDM8
 
The HUB-SDM8 is intended for customers who want to connect up to five external SDMs to the same datalogger, as well as run multiple power connections using 16 AWG wire. The HUB-SDM8 comprises an environmental enclosure with eight compression fittings (two larger) and eight terminal strips.
CABLE5CBL-L
 
CABLE5CBL-L 5-Conductor 22AWG Cable w/Drain
 
The CABLE5CBL-L is a 22 AWG five-conductor cable used to connect the Power/SDM connections from a HUB-SDM8 to the Power and SDM connections on a power source and datalogger.
CABLE5CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
HUB-CPI
 
The HUB-CPI allows eight CPI (CAN peripheral interface) devices to be connected together in parallel. Typically, this configuration includes one datalogger and up to seven CDMs (Campbell distributed modules) or sensors that use CPI.
28899
 
The 28899 is a 2 ft CAT6 Ethernet cable used to connect a HUB-CPI to a CPI socket on a datalogger, or to connect one HUB-CPI to another HUB-CPI.

Replacement Parts

28902
 
Includes three upper transducer wicks, three lower transducer wicks, a wick-installation tool, and a small tube of adhesive to attach the wicks to the transducers.
 
The 30749 is a small cylindrical canister of desiccant that is used in the CSAT3B to keep the internal electronics dry. The canister should be replaced as soon as the CSAT3B internal relative humidity exceeds 25%, or when the silica gel changes in color from blue to pink.
 
The 30748 contains a bubble level and three screws. It is used to replace the bubble level on a CSAT3B sonic anemometer.
30747
 
The 30747 is a large, rugged carrying case with foam to accommodate a CSAT3B sonic anemometer and its accessories. It is recommended for use when transporting or shipping the CSAT3B.
33435
 
The 33435 is a large, rugged carrying case without foam to accommodate a CSAT3B sonic anemometer and its accessories. It is recommended for use when transporting or shipping the CSAT3B. This product is intended for use with foam inserts that were originally shipped with the CSAT3B.
29191
 
The 29191 is the foam set used to protect the CSAT3B during transport and shipping.
30179
 
The 30179 is a 5 m (16 ft) USB cable. One end has a standard type A male connector for easy connection to a PC. The opposite end has a mini-B male connector for connecting to a USB port on a sensor, such as the CSAT3B.

Services

 
Provides calibration over the CSAT3B operating temperature range without using the coordinate measurement machine (CMM). No documentation is provided.
 
Provides calibration over the CSAT3B operating temperature range and coordinate measurement of transducer positions in space relative to the bubble mounting surface. A coordinate measurement machine (CMM) is used for this process. No documentation is provided.