Product Details
Restockable Yes
Warranty 3 years
Compliance CE Compliance Image RoHS Compliance Image
Ships With
(1) Sensor cable, 2.5 ft
(1) NIST Traceable & ANCI/NCSL Z540-1-1994 Calibration Certificate
(2) 505 Screw #6-32 x .375 Pan Phillips
(2) 6044 Grommet for #6 or 8 Screw
(1) Instruction Guide from original mfg

Campbell Scientific offers an in-house, NIST-traceable recalibration service for the CS100, CS105, and CS106. (This is a six-point verification for the CS100 and CS105, and a seven-point verification for the CS106.) This service can be ordered as pn 16085 in the Services section.

Common Accessories

CABLE5CBL-L 5-Conductor 22AWG Cable w/Drain
The CABLE5CBL-L is used when the barometer and datalogger are housed in different enclosures. This 22 AWG, five-conductor cable has a Santoprene jacket and an aluminum Mylar shield.
CABLE5CBL-L Options - show details
-L Pricing is in ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the data logger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
The ENC100 is available for housing the barometer in its own enclosure. It includes a backplate, compression fitting, vent, and mounting bracket.

Replacement Parts

The 16004 has five screw terminals for connection of the sensor wire that attaches the datalogger to the barometer. The terminal block plugs into a mating port on the barometers.
The 21819 inserts into the 16004. The 21819 helps prevent customers from plugging the 16004 connector in upside down. Plugging it in upside down will damage the barometer—perhaps beyond repair. The 21819 will key two of the 16004 connectors.
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.


Campbell Scientific offers a six-point NIST-traceable recalibration service for the CS100. The barometer is recalibrated to meet original specification. Factory recalibration requires an RMA (Returned Material Authorization). Because the recalibration is done in-house rather than at a manufacturer's facility, the standard turn-around time is only one week.