Regulators / CH150
CH150
 
CH150 12V Charging Regulator (-40 to +60C)
 
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 28490 Red Wire and Black Wire Power Cable Set
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

A100
 
A100 Null Modem Adapter for PS1X0/200 or CH1X0/200
 
The A100 adapter attaches to the CH150 to provide a null modem connection. This functionality is required in a station where a datalogger will not be present, such as a phone-to-RF base station.

Please note that only one A100 or A105 can be used at a time.
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension
A105
 
A105 12V Terminal Expansion Adapter for PS1X0/200 or CH1X0/200
 
An A105 adapter connected to the CH150 provides four additional 12 V terminals and four additional ground terminals. The extra terminals may make it easier for the customer to wire multiple continuously powered 12 Vdc devices to the power supply.

Please note that only one A100 or A105 can be used at a time.
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension
6186
 
The 6186 cable is needed if the CH150 is used with the BP84. The 6186 connects the CH150 to an external 12 V flooded battery such as a deep-cycle marine or RV battery.
29796
 
29796 Power Supply 24Vdc 1.67A Output, 100-240Vac 1A Input, 5ft Cable
 
The 29796 is a 24 Vdc wall charger and power supply. It comes standard with a USA/Canada plug, with an option to add a kit for international use. The cable has 5 ft length and terminates in pigtails with "+" and "-" labels.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs
SP10
 
SP10 10W Solar Panel, 20ft Cable
 
The SP10 solar panel provides a 10 W maximum peak power, 9 W guaranteed minimum power, 0.59 A current at peak, and 16.8 V voltage at peak.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a pre-wired enclosure.
-C -C w/ ET/CS110 Connector
With the -C option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station. This is equivalent to the -LC version available for some sensors.
Mounting Options - show details
-SM -SM Std Mounting Kit
Standard mounting to allow solar panel to be mounted directly to the leg of a tower or crossarm.
-EM -EM Extended Mounting Kit
Extended Mounting Kit allows the solar panel to be mounted on a tower or crossarm that puts the panel approximately 25.4 cm (10 in.) from the mast. This reduces shadows on the solar panel from other components or guy wires, which negatively affects the performance of the solar panel. It does, however, increase the wind load on the system.
SP20
 
SP20 20W Solar Panel, 15ft Cable
 
The SP20 solar panel provides a 20 W maximum peak power, 18 W guaranteed minimum peak power, 1.19 A current at peak, and 16.8 V voltage at peak.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a pre-wired enclosure.
Mounting Options - show details
-SM -SM Std Mounting Kit
Standard mounting to allow solar panel to be mounted directly to the leg of a tower or crossarm.
-EM -EM Extended Mounting Kit
Extended Mounting Kit allows the solar panel to be mounted on a tower or crossarm that puts the panel approximately 25.4 cm (10 in.) from the mast. This reduces shadows on the solar panel from other components or guy wires, which negatively affects the performance of the solar panel. It does, however, increase the wind load on the system.
SP50-L
 
SP50-L 50W Solar Panel
 
The SP50-L solar panel provides a 50 W maximum peak power, 2.9 A current at peak, and 17.5 V voltage at peak.
SP50-L Options - show details
-L ft cable per SP50

Allowed values: 1-50 ft, increments of 1 ft

A 20-ft length is typical; maximum length is 50 ft.
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
SP90-L
 
SP90-L 90W Solar Panel
 
The SP90-L solar panel provides a 90 W maximum peak power, 4.8 A current at peak, and 17.8 V voltage at peak.
SP90-L Options - show details
-L ft cable per SP90

Allowed values: 1-50 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
22110
 
22110 Power Supply 24VdC 1.67A Output, 100-240Vac 1A Input for PW Systems
 
This wall charger is used with our prewired enclosures. On one end, the 22110 has a plug that inserts into an ac wall socket, and on the other end, it has a connector that attaches to the prewired enclosure. The 22110 outputs 24 Vdc @ 1.67 A and accepts 100 to 240 Vac.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs

Replacement Parts

17200
 
The 17200 connects the internal sealed rechargeable battery to the CH150. This cable is fitted with slip-on connectors for the battery posts.
6182
 
The 6182 is the internal 7 Ah sealed rechargeable battery included with the CH150.
28490
 
The 28490 includes two wires—one red and one black. These wires differ only in their insulation color; they have the same same length (1 ft) and gage (18 AWG). The red and black wires are used to connect a Campbell Scientific power supply to a datalogger. The 28490 is shipped with our power supplies and may also be purchased as a replacement part.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.