Batteries / BP24
Product Details
Restockable Yes
Warranty No Warranty
Compliance
Ships With
(1) 33447 BP24 Mounting Kit
(1) 30401 BP12 and BP24 Battery Cable with Pigtail

Common Accessories

CH201
 
CH201 12V Charging Regulator (-40 to +60C)
 
The CH201 is a microcontroller-based smart charge controller that is ideal for charging 12 Vdc VRLA batteries. The charger uses MPPT (maximum power point tracking) technology to safely manage amperage and voltage for optimal battery charging and longevity. It has dual inputs for use with a solar panel and/or any 15 to 50 Vdc charging source. The dual inputs provide the option for fail-safe charging. The CH201 also outputs various parameters to allow close monitoring of the battery and power usage.
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension

Replacement Parts

10075
 
The 10075 provides the BP24's sealed rechargeable battery, but without the mounting hardware that attaches the battery to an enclosure backplate. This product should be selected when a replacement battery is required, an enclosure will not be used, or you intend to use a custom mount.
33447
 
The 33447 kit provides the necessary mounting hardware if you would like to supply your own 24 Ah 12 V sealed rechargeable battery instead of using the BP24 battery. You can also use the 33447 kit with the 10075 (BP24 battery without mounting hardware). 
30401
 
This 24 in. battery cable came bagged and taped to the BP24 battery. One end terminates in clips to connect to the battery's post. The other end terminates in stripped pigtails to be connected to a CR6 datalogger, a CR200X-series datalogger, or other products needing a pigtail connection to a battery. The 30401 may be purchased to replace a lost or damaged cable, or it may be purchased by those supplying their own batteries locally.
34031
 
This 24 in. battery cable comes attached to the BP12 and BP24 batteries. One end terminates in clips to connect to the battery's post. The other end terminates in a white connector to plug into a CH150, CH200, CH100, PS150, PS200, or PS100.
10073
 
The 10073 is the main component of the BP24's mounting hardware (without grommets, screws, and Velcro strap). Six pn 505 screws and six pn 6044 grommets attach the bracket to an enclosure backplate. The 20640 Velcro strap secures the battery to the 10073 bracket.
20640
 
The 20640 holds the battery to the 10073 bracket.
505
 
Six 505 screws are used to attach the 10073 bracket to an enclosure backplate. Six 6044 grommets are also required.
6044
 
Six 6044 grommets are used to attach the 10073 bracket to an enclosure backplate. Six 505 screws are also required.