AVW200
 
AVW200 2-Channel Vibrating Wire Spectrum Analyzer Module
 
Temperature Ranges
-ST -ST -25 to +50C
-XT -XT -55 to +85C

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 10873 Serial Data Cable, 9-Pin Female to 9-Pin Male
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw
(1) 19246 Power Cable, AVW200-Series to Datalogger

Common Accessories

 
CABLE3CBL-L 3-Conductor 22AWG Cable w/Drain
 
The CABLE3CBL-L is recommended to connect the AVW200 to a datalogger when SDI-12 is used. This 22 AWG, three-conductor cable has a Santoprene jacket and an aluminum Mylar shield.
CABLE3CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
18663
 
This 1-ft, null modem cable has 9-pin connectors on both ends. The 18663 can connect the AVW200's RS-232 port to the datalogger's RS-232 port.
17855
 
One end of this cable is fitted with a 9-pin connector, and the other end terminates in pigtails. The 17855 is used to connect the AVW200's RS-232 port to a pair of control ports on a CR800, CR850, CR1000, or CR3000.

Replacement Parts

3768
 
This green, plug-in power connector is shipped attached to the AVW200. The 3768 provides screw terminals for connecting the 12V and GND wires of the 19246 power cable. The other end of the 19246 power cable connects to the 12V and G terminals of a datalogger or power supply.
20581
 
The 20581 provides screw terminals for connecting the sensor(s) and multiplexer(s) to the AVW200. This green, plug-in connector may be purchased to have a spare terminal strip or as a replacement item if the strip has been lost or damaged.
 
The 19246 connects the AVW200 with the 12V and G terminals of a datalogger or power supply. This screw terminal is shipped with the AVW200 and available as a replacement part.
10873
 
This RS-232 cable connects the AVW200 with a PC. The AVW200 is connected to a PC during configuration and troubleshooting. The 10873 is shipped with the AVW200 and available as a replacement part.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.