31433
31433
OrderableHUGHES9502 Mounting and Cable Kit
Overview
The 31433 is an accessories kit for the HUGHES9502 Inmarsat BGAN Satellite IP Terminal. This kit includes all the mounting hardware required to securely mount the terminal and antenna, connect the terminal to a data logger for communications and control, and connect the terminal to a charge regulator such as the CH150 or CH200.
Specifications
- -NOTE-
- The 31447 HUGHES9502 Parts Included Kit that ships with the 31433 HUGHES9502 Mounting and Cable Kit includes a number of components in the designated quantities below.
Specifications can be found on each component page: (1) 31440 Power Wire Set of Red and Black Wires, 2 ft (1) 28899 CAT6 Ethernet Unshielded Cable, 2 ft (1) 17856 Serial Cable, DB9 Socket (Female) to Pigtail, 2 ft (1) 17648 USB Cable, Type A Pin (Male) to Type B Pin (Male), 6 ft - Weight
- 1.36 kg
(3.0 lb)
Common Accessories
(3)21212
Black Cold Shrink Tape
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the antenna connections. After connecting the coaxial cables to the antenna, wrap the tape around the connectors that are exposed to the environment.
Orderable6290
#1 Phillips Screwdriver
A 6290 Phillips head screwdriver may be needed if an enclosure is not ordered on the same order.
Orderable8125
Flat-Bladed Screwdriver, 2.5 mm Blade x 50 mm Shaft
An 8125 flat-bladed screwdriver may be needed if a datalogger is not ordered on the same order. The blade is 2.5 mm across, and the untapered shaft length is 50 mm. The handle has an approximate length of 9 cm and features a rotating end-cap that makes the screwdriver easy to rotate.
Orderable
Replacement Parts
(2)30455
HUGHES9502 Antenna Mounting Kit
The 30455 is a mounting bracket kit for the flat, directional antenna provided with the HUGHES9502 Inmarsat BGAN IP Satellite terminal. The 30455 Antenna Mounting Kit is commonly used with the 30456 Terminal Mounting Kit. Both of these kits are included with the 31433 Mounting and Cable Kit.
Orderable30456
HUGHES9502 Terminal Mounting Kit
The 30456 is a mounting bracket kit for the HUGHES9502 Inmarsat BGAN IP Satellite terminal. The 30456 Terminal Mounting Kit is commonly used with the 30455 Antenna Mounting Kit. Both of these kits are included with the 31433 Mounting and Cable Kit.
Orderable
Ships With
(3)30456
HUGHES9502 Terminal Mounting Kit
Orderable30455
HUGHES9502 Antenna Mounting Kit
Orderable- HUGHES9502 Parts Included Kit
