PC400

Added the CsTelemetry component and events.

CRBASICEDITOR: Fixed a visual spacing issue with datalogger items on the opening screen.

DEVCONFIG: Added support for CS241 G2.

DEVCONFIG: Fixed an issue where the 'No Updates Available' message was missing from the Manage OS panel.

DEVCONFIG: Resolved a bug that caused some devices to be incorrectly identified as the same type.

DEVCONFIG: Resolved a bug that prevented certain dataloggers from finding updates when checking the update server.

DEVCONFIG: Added support for AL200X.

DEVCONFIG: Fixed an issue where the application could create incorrect folder paths if a working directory setting was missing.

DEVCONFIG: Added support for the AtmosVue30 and AtmosVue40.

DEVCONFIG: Added support for the Clima VUE 40.

DEVCONFIG: Fixed an issue where updates would fail in the Manage OS panel.

DEVCONFIG: Added support for the cloud config sub-panel for GRANITE dataloggers.

DEVCONFIG: Fixed a bug where canceling a datalogger OS update had no effect.

DEVCONFIG: Fixed bug where the Settings Editor table display fails to render '<' and '>' symbols.

ShortCut: Added support for CS241DM G2.

ShortCut: Added support for Client/Server capabilities to the CR1000X and CR6.

PC400 (Moderate) Fixed issue where PC400 would ring up datalogger in focus automatically.

PC400 (Feature) Added the ability to turn Automatic Update checks on or off.

PC400 (Feature) Added standalone support for the CR350. Previously, it was included as a part of the CR300 Series loggers.

PC400 (Feature) Added default file filter for programs on the CR350 (.CRB). Updated CR300 filter to show both .CR300 and .CRB by default.

LogTool (Feature) Added the ability to sort stations alphabetically.

ViewPro (Moderate) Fixed a clipping issue where text on minimal width columns would overwrite the next column.

ViewPro (Minor) Inside TOB1 files, Booleans now show up as true/false instead of as -1/0.

ViewPro (Feature) Added legend gradient controls to the line graph properties form. These settings are also included to the saved defaults.

ViewPro (Feature) When record numbers aren’t sequential, they are now separated with a horizontal black line. The record after the line has a cream-colored highlight. This setting can be turned off manually.

Short Cut (Major) All bridge measurements now check for channel adjacency.

Short Cut (Moderate) Changed Modbus Master/Slave terminology to Client/Server.

Short Cut (Moderate) Added C1-2 and SE1-4 as additional terminals for switch closure measurements on the CR350 datalogger.

Short Cut (Minor) Fixed a bug where 4-20mA generated CRBasic code didn’t match the wiring diagram.

Short Cut (Feature) Added support for the following sensors: Wintersense Road Surface Temperature Sensor, TempVue10 (4-wire) Temperature Probe, TempVue20 (SDI-12) Temperature Probe, TempVue50 (SDI-12) Water Temperature Probe, SnowVue10 Digital Snow Depth Sensor, CS320 Digital Thermopile Pyranometer (SN>3505).

CRBasic Editor (Moderate) Fixed an issue where jumping to a subroutine (Ctrl+Y or blue arrow on the toolbar) could find the wrong subroutine if the full name and params are a subset of a different subroutine.

CRBasic Editor (Feature) Using the Goto Navigation menu (Ctrl+G or green arrow on the toolbar), the subroutine options now also include functions.

DevConfig (Major) Added the ability for DevConfig to automatically check for updates if the user allows it.

DevConfig (Major) Changed the .csipasswd format so that an "admin" is no longer created by default, nor is it required.

DevConfig (Major) Fixed the ability to edit program settings for the CR350 within the “Station Summary” screen.

DevConfig (Minor) Added an evaluator to check passwords for certain conditions to consider it a strong password.

DevConfig (Minor) Replaced all references to the RF451 model with RF451/RF452 to reflect support for the new Freewave radio module.

DevConfig (Minor) Default directory used for storing config files now references "\\AppData\\AppLocal" instead of roaming.

DevConfig (Feature) Added the Security Check tab for PakBus dataloggers that displays the results of a security audit and provides links to the panel/subpanel that has a control associated with the setting.

DevConfig (Feature) Added a new button to the collect data panel that provides a short cut to unselect all tables.

DevConfig (Feature) Added support for the SPECTRUM 100, SDM-SIO2R, CR350-RF452/CR350-CELL230 devices, as well as a CR6/CR1000X with an attached cell modem.

PC400 is now Campbell Scientific's free entry-level datalogger support software.

One of the main efforts in the development of PC400 4.7 has been support for the new GRANITE Data Logger Modules and the new CR350 datalogger. (Note that in the main PC400 interface, the CR350 is considered a CR300Series datalogger. However, in Device Configuration Utility, Short Cut, and the CRBasic Editor, it is a separate device.)

In addition, a Neighbor PakBus Address field has been added to the Datalogger Settings screen in the EZSetup Wizard. This allows you to specify the neighbor you will go through to connect to your datalogger. For example, this can be used to enter the PakBus address of a Konect PakBus router.

Also, a TCP Password field has been added to the Security Settings screen in the EZSetup Wizard to control IP access to a datalogger.

A Software Updater has been added to PC400 and Device Configuration Utility that will automatically notify you when a new release is available. New Version will appear in the menu bar when PC400 or Device Configuration is opened. Click New Version to display the new version available. Click on the new version to be taken to the Software Updater and update your software.

Users of Campbell Scientific's LNDB database software who are using a PostgreSQL or Oracle database can now access the data directly from the database with View Pro. In addition, View Pro now allows you to set graphs to start maximized, set default settings for all new line graphs, and jump to the beginning or end of a line graph.

Added support for the CR1000X datalogger.

PC400 Server - The underlying encryption library has changed from axTLS to mbedTLS.

PC400 Server - Added support for the new Device Collect Area Rename transaction. The server interface version has been incremented to 1.12.04 to report this.

PC400 Server - Added code to save and restore the reported station name for PakBus dataloggers. Also added code to clear the flag that indicates that we are polling for datalogger info when such an operation is closed down. This addresses an issue where the station name written to new data file headers was an empty string if the first attempt to get compile results after starting the server failed.

PC400 Server - Fixed a bug where the overloaded versions of on_callback_wait_end() were not called because the signature of the method was changed. This manifested itself as a problem handling call-back with a phone modem connection, where the connection was established and abandoned after a two-minute interval because the modem's callback ring timer was never cleared.

PC400 Server - Fixed a bug for BMP5 dataloggers where an access violation could occur when testing to see if a closing operation was a get compile results op.

PC400 Server - Changed the BMP5 file synch operation so the directory request will include a wild card if there is no given file specification. This addresses a problem with recent datalogger operating systems where the datalogger fails to enumerate the files if no colon or pattern was given.

PC400 Server - Changed the various error counters mapped from the status table to signed integers and set their default value to -1 to indicate that the value is unknown. Also set the process string for this to a value of "error_counter" in order for the status monitor to be able to apply special formatting for these that will leave negative values as blank.

PC400 Server - Changed the statistic that maps the datalogger lithium battery voltage so that this is initialized to a value of NaN and changed the process string of these to "battery_voltage" so that the status monitor can leave NaN values as blank and not be inclined to format these values with three fixed decimal digits.

PC400 Server - Added the ability to register string values in the statistics table and created a status table map for the CR300's new LithiumBattery value which gets reported as a string rather than a floating point voltage value.

PC400 Server - Changed the description for the CR300 "LithiumBattery" statistic to "Lith Batt Volt".

PC400 Server - Added support for the new defaultScheduleEnabledExpr setting for PakBus dataloggers.

PC400 Server - Added code to the challenge/responder component used for authenticating PakBus/TCP links with a PakBus/TCP password so the delayed start timer is shut down when invalid authentication data has been received from the datalogger before starting the challenge. Failure to do this was causing a crash when the delayed start event was processed and the authenticator was no longer in a state to do anything.

PC400 Server - Fixed a bug in the file synch poll operation where the client acknowledgement was sent after the polling process was notified. That order could result in the operation being deleted when trying to send the client acknowledgement and lead to an attempt to access released storage.

PC400 Server - Added code to the timed method for PakBus routers that periodically checks the validity of the current transaction focus so if there is no route available for that transaction, the transaction will be considered invalid, an error (unreachable) will be reported, and the current focus cleared.

PC400 Server - Implemented a new collect mode, backfill by interval, for the BMP5, BMP3, and BMP1 versions of the logger query transaction. The server interface version has been set to 1.12.06 to reflect this support.

PC400 Server - Changed code that was recently introduced in the PakBus router that will invalidate transactions if there is no router to carry them out so that this rule will not be applied to hello transactions.

PC400 Server - Changed the code that handles the case where the datalogger reports that the file is inaccessible or the name is invalid so that the file is removed from the get queue and is also removed from the files history. This will allow us to "rediscover" the file on a future poll if the file really is inaccessible. This addresses an issue where it would appear that the datalogger was removing the file between the time that we got the directory and the time we started asking for the file. In this case, the file name would get stuck in the get queue and we would ask for it over and over without giving up.

CRBasic Editor - Added support for the "Double" type on variables. This includes highlighting and lists.

CRBasic Editor - Added a compile menu option for conditional compiling so that Include files are compiled into the code and displayed in a new window. This uses the -i command line instead of the -p option.

CRBasic Editor - Added a search box in the Instruction Panel.

CRBasic Editor - Fixed a range check error that could occur if you add a subroutine name and there was not already a name there.

CRBasic Editor - Modified the Editor to mark the menu item when the Display on Startup selection is made.

CRBasic Editor - Fixed a problem that was changing syntax highlighting when text was selected.

CRBasic Editor - Several changes were made to improve how .dld files are loaded. This also fixes a related timing bug where the Editor would load the last program used in front of a program that was opened by ShortCut.

CRBasic Editor - Fixed a problem finding the closing "}".

CRBasic Editor - Fixed a problem when using the F2 key that gave a range check error and unexpectedly launched the help.

CRBasic Editor - Modified the Editor to move the cursor to the end of the line when the comment continuation functionality is used.

CRBasic Editor - When a recent file does not exist, the error message will now indicate the file does not exist.

CRBasic Editor - The Editor is now forced to the foreground when you open a CRBasic file using Windows Explorer.

CRBasic Editor - Fixed #IF family of instructions. The # symbol and #IFDEF will now highlight properly

CRBasic Editor - Fixed an issue where the Find dialog would not be visible because it was displayed offscreen.

CRBasic Editor - Fixed an issue that prevented the Program Send dialog from retrying server connections.

CRBasic Editor - Increased the buffer space for paths.

CRBasic Editor - Changed all extensions on temporary files from '.xxx' to '.tmp'. The former can trigger a response from anti-virus software.

CRBasic Editor - Improved the error message when precompile does not run properly. Also improved it to use standard load if the compile result file will not load as UTF8. This helps when some Asian characters sets are used.

Device Configuration Utility - Added the ability to modify the CS240DM.

Device Configuration Utility - Added the ability to modify the CH201.

Device Configuration Utility - Added the ability to modify the CR300-CELL200 and CR310-CELL200 datalogger.

Device Configuration Utility - Added the ability to modify the CS475A radar level sensor.

Device Configuration Utility - Added the ability to modify the NL241 Wi-Fi network link interface.

Device Configuration Utility - Added a new “Data Collection” panel to allow downloading of data from dataloggers in the field.

Device Configuration Utility - Added USB drivers (RNDIS) for the CR6-series datalogger.

Device Configuration Utility - Added “Radio Enable” setting to the deployment panel for the CR6- and CR300-series dataloggers with internal radios.

Short Cut - Redesigned the user experience and GUI interface.

Short Cut - Fixed when Alias is called on an existing array. It now updates the index along with the name. When searching for the Alias associated with a CRBasic array element, now does not return the Alias (name, object, or units) if the Alias is disabled.

Short Cut - Modified the program to prevent ground wires from being moved from G terminal to Ground terminal and prevent Ground wires from being moved to G terminal. With preferred grounds, all grounds are in a common group.

Short Cut - Fixed an issue where the input location ID was showing up for CRBasic type of dataloggers in the summary for labels created by used defined expressions.

Short Cut - Added a custom check to look for and prevent SDI-12 and Pulse channels on channel pairs for the CR6. Also on the control ports for the CR1000X. These are not allowed but are outside the normal rules for channel pairs .

Short Cut - Modified to allow multiple decimal chars when editing a string field (like an IP address).

Short Cut - Enhanced to allow manual setting of high resolution for long data type.

Short Cut - Added new functionality: when loading a saved program, add any new channel types that are found in the DLF file. For example, switchclosure channels were added to the CR6. This was needed as we learned that switch closure connections on control ports are different than on U terminals (U terminal switch to ground and C port switch to 5V). So a new switchclosure channel type was added, and the C ports were removed from the pulse channel type. Caveats: Using the C ports requires a U port to be configured as a 5V source, as the CR6 has no 5V terminal. Since the C ports are only used when the U terminals are full, the user probably will not have one available. Also, when a saved program is loaded, the old pulse channel definitions are still used, so they will continue to be allocated and will not work. This will not be addressed as it is very unlikely to occur. The work-around is to start a new Short Cut program. We also added a new channel type of SDI-12 to the CRx000 and CR10X family of loggers. This is so the data connection could be moved instead of being on a fixed port. This required updated sensor files and datalogger files. This will allow updated datalogger and sensor files to work with new channel types.

Short Cut - Fixed an issue when making the working directory save work.

Short Cut - Modified the set buffer parameter of Scan instruction for some dataloggers with sub-second scans.

Short Cut - Fixed RepBlockArray aliases to have the current units if the user has edited the units since an alias was created.

Short Cut - Fixed server login. Login will not be reattempted multiple times, only when the program is sent from Short Cut.

Short Cut - Increased the font size by 2 for the wiring diagram visual and text display.

Short Cut Bug Fix - Fixed a problem for the CR300-series datalogger where 12V power ground was shown wired to a signal ground (the ground symbol) instead of a power ground (G) terminal. This could affect single-ended measurements, if current flowing on the return was large enough.

Short Cut Bug Fix - Changed ground connection for several SDI-12 sensors to allow the signal wire to be moved.

Short Cut Bug Fix - Fixed a problem where bridge strain measurements on multiplexers (for example, the AM16/32) had the excitation voltage set to zero.

DevConfig Enhancement - Updated CR300 series support including the new CR310 with the various radio and WIFI versions for the CR300 and CR310.

DevConfig Enhancement - Added additional radio options for the CR6.

DevConfig Enhancement - Added SR50A OS download support.

DevConfig Enhancement - Made numerous device setting changes, cosmetic improvements, and some new capabilities and optimizations.

PC400 Enhancement - Added support for CR300 Series dataloggers.

PC400 Enhancement - Added the ability to configure the number of rows and columns in the Monitor Data tab.

PC400 Enhancement - Upgraded file viewer from View to View Pro.

PC400 Enhancement - Added the "Install USB Driver..." button to the EZSetup Wizard. This button now opens the new Install USB Driver dialog which uses the list of drivers available to install from DevConfig giving the user the ability to select and install a driver from the Setup Screen.

Short Cut Enhancement - Added support for the CR300 Series dataloggers, CDM-A108, and CDM-A116.

Short Cut Enhancement - Added new or updated sensor files for 05108-45 Wind Speed & Direction Sensor, CS512 Dissolved Oxygen Probe (a CSL version, there was already a CSI version), LI190R Quantum Sensor, LI200R Pyranometer, LI200RX Pyranometer, WXT520 Weather Transmitter, Sunshine Hours (for CRBasic dataloggers, Edlog dataloggers already had it).

CRBasic Editor Enhancement - Added support for the CR300.

CRBasic Editor Enhancement - Added ability to display line numbers.

CRBasic Editor Enhancement - Added a new start page that by default is displayed when the CRBasic Editor is opened.

CRBasic Editor Enhancement - Added support for the -u precompiler command line option which checks for unused variables and subroutines.

CRBasic Editor Enhancement - Made some changes that allow a DLD file to be automatically associated with a datalogger extension on open. CRBasic determines the datalogger extension based on the "meta" information found on the first line of the program.

CRBasic Editor Enhancement - Added a checkbox in the Font selection dialog that allows the user to filter monospaced fonts.

CRBasic Editor Bug Fix - Fixed a problem where an instruction on the same line as an if statement would not work properly with the right click menu to edit instruction.

CRBasic Editor Bug Fix - Fixed a bug so that opening files with bookmarks does not 'modify' the program and thus prompt for a save if nothing else is changed.

CRBasic Editor Bug Fix - Added code that allows us to force an insert instead of an overwrite in certain cases (e.g., the tab key is pressed in overwrite mode). This behavior is consistent with other mainstream editors.

CRBasic Editor Bug Fix - Fixed an issue where an Undo would not restore characters that had been overwritten.

CRBasic Editor Bug Fix - Limited menu item captions of functions/subroutines to 120 characters.

CRBasic Editor Bug Fix - Reworked Find/Replace/Replace All code to solve problems with "match whole word only".

CRBasic Editor Bug Fix - Fixed some Replace Variable (F10) and picklist issues that affected single and multi-line instructions.

Device Configuration Utility Enhancement - Added support for the CR300, A100, RF451, CR6-WIFI, CR6-RF451, RF407, SDM-SIO1A, SDM-SIO4A, SoilProf3, TX321, and CDM-A100 Series.

Device Configuration Utility Enhancement - Changed the settings editor panel so that a search control is used to help locate settings rather than the combo box previously used.

Device Configuration Utility Enhancement - Changed the datalogger restore wizard by adding a page that will allow the user to select the files that will be restored.

Device Configuration Utility Enhancement - Added a search control immediately above the device types list. This control will allow the user to restrict the devices shown to those whose description matches a subset of what the user typed.

Device Configuration Utility Enhancement - Added support for a fixed 76800 baud rate on all CR1000, CR8xx, CR3000, and CR6 serial ports.

Device Configuration Utility Bug Fix - Fixed a bug in the serial number view for the CD295 where the apply button had no effect because of the code that checked for needing to commit did not recognize when the serial number had changed.

Server Bug Fix - Fixed a problem in the base class for classic datalogger commands where, if the command failed because of an invalid echo and the server immediately started on another command (say an failed "F" command followed by a "G" command), there server would make no attempt to resynchronize the link with the datalogger. This would end up sending the characters for the subsequent command as if they were a part of the preceding command.

Server Bug Fix - Fixed a bug in the interpretation of the classic logger ports byte reported through the K command where the code was using a multiply operator rather than a mask operator when picking out the value for the fourth port. The result of this error was that the fourth port would be reported high if any other port was high.

Server Bug Fix - Fixed a bug, introduced in LN 4.3, where retries were no longer enabled for the classic datalogger position modem pointer (G) command.

Server Bug Fix - Added code in the BMP5 file synch operation to use a colon to separate the file spec from the drive when it is specified when requesting a directory from the datalogger. This addresses a problem where the datalogger was returning an empty file set when the drive and file name pattern were both specified.

Server Bug Fix - Changed the BMP5 implementation of the hole collect operation so that, if the response sent by the datalogger is outside the range expected by the computer, all pending holes will be considered lost and no new holes will be added. Previously, the server was assuming that the entire table could be collected as hole and the end result was that the server could get stuck in a loop where the same records were being collected over and over.

PC400 Enhancement - Added support for CR6 Series dataloggers.

PC400 Enhancement - Added support for CRVW Series Vibrating Wire Recording Interfaces.

PC400 Enhancement - Added support for dragging and dropping files from Windows Explorer onto the File Control dialog.

PC400 Enhancement - Added support for modifying Station Status

Status Table values via the double click.

Short Cut Enhancement - Added support for CR6 Series dataloggers.

Short Cut Enhancement - Added new or updated sensor files for the Switched 12 Volt Timed Control, CS475/CS476/CS477 Radar Water Level Sensor, GPS16X-HVS GPS Receiver, CS140 Luminance Sensor, CS120 Visibility Sensor, PWS100 Present Weather Sensor, CS125 Present Weather and Visibility Sensor, CS135 Ceilometer, Jewell Instruments 904-T Clinometer Pak, DGSI Vibrating Wire Strain Gage, DGSI Vibrating Wire Piezometer, Generic Thermistor (CR6), CS11 Current Transformer, CS11 Current Transformer with Potential Transformer

CRBasic Editor Enhancement - Added support for CR6 Series dataloggers.

CRBasic Editor Enhancement - Added support for optional parameters (for instructions that have them) in parameter dialog box.

CRBasic Editor Enhancement - Added ability to copy compile results to clipboard.

CRBasic Editor Bug Fix - Fixed a problem with the Undo list using up a large amount of memory.

View Bug Fix - Fixed FSL file loading and a range check error in the Array Definitions dialog.

Device Configuration Utility Enhancement - Added support for the CR6 Series, CRS451, CRVW, VSC100, CS125, CS140, RavenXT, RF401A, LS300,CSAT3B.

Device Configuration Utility Enhancement - Added wizards to back up a datalogger's settings and files to a zip file and to restore these from a zip file.

Device Configuration Utility Enhancement - Added a data recovery wizard.

Device Configuration Utility Enhancement - Updated support for the CRX000 dataloggers, AL200, CC5MPX.

Device Configuration Utility Enhancement - Added a context menu option to the terminal emulator that will allow the user to toggle whether new lines are time stamped as they are added.

Device Configuration Utility Enhancement - Changed the file control panel so that, if the user attempts to send an operating system to the datalogger, an operation will be included that will start that operating system using the file control transaction.

Device Configuration Utility Bug Fix - The AL200 Slot Offset setting will now be interpreted as an unsigned four byte integer rather than as an unsigned two byte integer.

Device Configuration Utility Bug Fix - Fixed a bug in the settings editor panel where a poll attempt could take place after a session failure. This could lead to a crash due to an unhandled exception.

Device Configuration Utility Bug Fix - Made the code that checks the length of the telnet password conditional on that setting being reported. This addresses an issue where a special version of the OS didn't support the deployment panel.

Device Configuration Utility Bug Fix - Added code in the handler for command completion that will check to make sure that the transaction queue is not empty before handling the command outcome. This addresses a bug that could lead to a crash when power was pulled on the TX320 while polling transactions were under way.

Device Configuration Utility Bug Fix - Fixed a bug where the NL2xx deployment panel was attempting to unconditionally poll the IPv6 address regardless of whether the device reported the setting. This could lead to an unhandled exception when connecting to an NL200 with an older OS.

Device Configuration Utility Bug Fix - Added code to stop automatic updates of settings such as IPv6 status when settings are changed in the NL2xx deployment panel.

Device Configuration Utility Bug Fix - Fixed a bug where the settings manager component was returning true to the query of whether settings needed to be committed when there was a cancel or commit operation under way. The result was that DevConfig would post a modal dialogue confirming close if the user tried to close the application while a cancel or commit operation was under way and could result in an unhandled exception.

Device Configuration Utility Bug Fix - Fixed a bug in the RF430 deployment where, when settings were loaded from the radio, the radio address control was initialized with the value of the network address.

Server Enhancement - Added support for the CRVW and CRS500 datalogger types.

Server Enhancement - Added code in the serial port thread so that, if the simplified I/O is enabled, the thread will use a timer that will get reset whenever data is transmitted or received. If this timer expires, the thread will call SetCommState() in an attempt to force communication over a USB serial port in order to test if the driver connection is still valid.

Server Enhancement - Added support for an optional parameter to the device files enumerate command message that will allow the client to specify a pattern that will be used by BMP5 dataloggers to restrict the set of files that are reported.

Server Enhancement - Implemented the device force link off line transaction.

Server Enhancement - Changed the BMP5 implementation of the device set variable transaction so that it recognizes when the datalogger sends the response code indicating that it needs to reboot. The server will now shut down the link and wait for the specified amount of time before reporting the outcome and launching the poll.

Server Enhancement - Added a new coralib function, cora_on_device_change(), that can be called to inform the server that a potential device remove device has been detected. Added code in the serial port class and its associated provider that will conduct a test to determine whether the serial port handle is still valid as a result of that method. Doing this gives the server a chance to detect USB serial port failures more reliably.

Server Bug Fix - Changed the BMP1 operation/transaction relation so that the on_message_being_sent() operation method has the ability to prevent the message from being sent by its return value. This should prevent the BMP5 tunnel carrier operation from sending an empty message when the router has nothing to send.

Server Bug Fix - Fixed a bug in the code that unregisters a static route where we could use the wrong address to access the child list under certain configurations. This resulted in an unhandled exception that forced the server to reset.

Server Bug Fix - Added an optional flag to the device startUp() method so that setting changed flags will be cleared only if that flag is set. Changed the rename and move network map modifiers so that this flag is not set when the newly renamed or moved devices are started. This will allow any pending changes to be written when the device configuration is written.

Known Issues - When using LogTool to zip all log files and certain file errors occur, the operation may still be reported as successful. For example, If LoggerNet is running as a service and an attempt is made zip all log files and store them in the root directory of a mapped network drive, a failure will probably occur as the service cannot access mapped drives but the operation is reported as successful.

PC400 Enhancements - Added ability to use MD9 connection with a PakBus datalogger.

PC400 Enhancements - Added PakBus Encryption Key setting to the CR1000/CR3000/CR800 Series.

PC400 Enhancements - Added the ability to view a file from File Control.

PC400 Bug Fix - Changed Max Time On-Line maximum to 23 h 59 m 59 s.

PC400 Bug Fix - Changed default Beacon Interval to 0.

PC400 Bug Fix - Time zone offset is now applied when finish is clicked as well as when the user sets the clock.

PC400 Bug Fix - Trying to send an OS to a 2 Meg CR1000 now gives the correct error message.

PC400 Bug Fix - Removed the Time of Fill column from the Station Status because the information was not always correct.

PC400 Bug Fix - Fixed a bug when dealing with very large records.

Short Cut Enhancement - Added a cache of the sensor files to speed loading.

Short Cut Enhancement - Added Datalogger Step that combines the datalogger selection, scan rate selection, and CR9000X card selection.

Short Cut Enhancement - When adding a sensor, if more than one of the selected sensor can be added, the choice of how many sensors to add is included as part of the sensor’s form rather than as a separate dialog box

Short Cut Enhancement - When adding more than one sensor, a dialog box is available that allows you to input unique values for certain calibration and/or conversion factors (e.g., multiplier, offset, gage factor) for each sensor being measured.

Short Cut Enhancement - Each sensor form now includes a wiring tab that shows the wiring for the sensor. This tab allows you to manually change the wiring location, if desired.

Short Cut Enhancement - For some sensors that require an excitation voltage, the sensor form now includes parameters that allow you to calculate Sensors per Excitation Channel. (Exciting more than one sensor with an excitation channel is helpful when the sensors to be measured outnumber the available excitation channels.)

Short Cut Enhancement - Added an SC115 checkbox to the Outputs screen to copy data to an SC115.

Short Cut Enhancement - Added new or updated sensor files for the 27106T Wind Speed Sensor, the CS525 ISFET pH Probe, the CS650/655 Water Content Reflectometer, the CS506 Fuel Moisture Sensor, the NR-LITE2 Net Radiometer, the CNR4 Net Radiometer, a Quarter Bridge Strain Gage, Half Bridge Strain Gage, Full Bridge Strain Gage, the Geokon 4000/4050 Vibrating Wire Strain Gage, the Geokon 4100 Series Vibrating Wire Strain Gage, the Geokon 4420 Vibrating Wire Crackmeter, the Geokon 4500 Series Vibrating Wire Piezometer, Geo-Instruments Electrolevel Tiltmeter, VTI ECI-1 Embedded Corrosion Instrument, Modbus Master, Modbus Slave, BS-3+/OBS300 Turbidity Sensor, HC2S3 Temperature and Relative Humidity Sensor, OBS500 Smart Turbidity Meter (SDI-12), Device for Analog Input from SDM-AO4A, 52202 Rain Gauge (CSI), CMP3/CMP6/CMP11 Pyranometer, CS526/CS525 ISFET pH Probe, 020C Wind Direction Sensor, A100LK Wind Speed Sensor, 092 Barometric Pressure Sensor, 61302V Barometric Pressure Sensor, P2546A Wind Speed Sensor, 110PV Surface Temperature Probe, and a Wind Vane Installation Offset Correction (calculation)

Short Cut Enhancement - Enhanced readability of Wiring Text.

Short Cut Enhancement - Selected Sensors are now shown in a tree format and branches can be expanded or collapsed as needed.

Short Cut Bug Fix - Fixed an issue where toggling the advanced outputs was not configuring the flags correctly.

Short Cut Bug Fix - Fixed an issue where Short Cut would crash if the user attempted to delete a sensor that referenced a custom sensor file that no longer existed.

Short Cut Bug Fix - Creating custom sensor files for multiplexers is no longer allowed.

Short Cut Bug Fix - Fixed some translation issues.

Short Cut Bug Fix - Fixed some issues in wiring diagram where wires were not being shown.

Short Cut Bug Fix - Fixed an issue where a *4 attribute in a CR10X program caused and access violation.

Short Cut Bug Fix - Fixed a problem where if you created a program for a CR10XTD/CR10XPB that utilized high res to final storage you would get three FSL field labels for that output instead of one.

Short Cut Bug Fix - Fixed a problem where generating a CR10X program that used an AM25T would give an error when "differential voltages" was selected for the output type.

CRBasic Editor Enhancement - Added a new feature, Conditional Compile and Save to the Compile menu. This item compiles the program and creates a new file in which all conditional compile constructs (e.g. #if statements) are gone.

CRBasic Editor Enhancement - Added a Constants Customization feature.

CRBasic Editor Enhancement - The CRBasic Editor now allows you to Save and Open Display Settings. Display settings affect the look and feel of the CRBasic Editor. This includes font and background, as well as syntax highlighting.

CRBasic Editor Enhancement - Added Unicode support.

CRBasic Editor Enhancement - To support Unicode, an Insert Symbol dialog box has been added to the CRBasic Editor. This allows you to insert Unicode symbols into your CRBasic program for use in Strings and Units declarations.

CRBasic Editor Enhancement - Added the Shift+Insert hotkey to perform the paste function.

CRBasic Editor Bug Fix - Fixed an error when attempting to compile a program when the previous program was saved in a folder that no longer exists.

CRBasic Editor Bug Fix - Fixed an access violation that occurred when clicking the red x in the Confirm dialog box. It is to be noted that the access violation only happened if the cursor was on a blank line.

CRBasic Editor Bug Fix - Fixed a problem when attempting to replace the baud rate parameter in the SerialOpen command, by using right-click to choose from the variable list. Rather than replacing the previous baud rate, it inserted a second baud rate.

CRBasic Editor Bug Fix - Fixed a bug where the Undo/Redo could be very slow (up to 6 seconds for one redo) for very large files.

CRBasic Editor Bug Fix - Fixed so that when a line is selected and you scroll down or up it will scroll nicely at the extremes of top and bottom.

CRBasic Editor Bug Fix - Fixed a problem with deleting templates.

CRBasic Editor Bug Fix - Fixed a problem where the insert key was not toggling between insert and overwrite.

CRBasic Editor Bug Fix - Made the editor's screen position and window size persistent even in a dual monitor environment.

CRBasic Editor Bug Fix - Files opened with a double click will now cause the editor to open in the last window size used by the editor.

CRBasic Editor Bug Fix - Cursor doesn't go to end of line when enter is pressed splitting a line

CRBasic Editor Bug Fix - Fixed a problem where the Save As dialog appended an extra extension when you replaced the default extension with .dld.

CRBasic Editor Bug Fix - Fixed a problem during a switch from the find dialog to the replace dialog, the state was confused and it did not see the search word had changed.

CRBasic Editor Bug Fix - With the Find dialog box open, you can now use the Paste functionality to paste into the program.

CRBasic Editor Bug Fix - Fixed an issue where the cursor was sometimes misplaced after an F10 variable insert/replace.

CRBasic Editor Bug Fix - Fixed an issue where an extra set of parenthesis was added when using the F10 (Replace Variable) feature to replace an array variable.

View Enhancement - Added ability to import CSV files.

View Enhancement - Added a search function to the main grid accessible using ctrl-f, or Edit/Find.

View Enhancement - Added the record view dialog to address the requirements for displaying a status table record. The record view dialog will work for any CSI file type displayed in a grid.

View Enhancement - Added cancel button to Selection Properties for line graph selections. Also added cancel buttons to the Graph Options screen. This change will change back the on-screen live changes.

View Enhancement - Extensively revised the print preview code so only one page preview is shown at a time. Also redid the print code. Print Preview will no longer "count pages". Switching from portrait to landscape or back now happens instantaneously without showing a dialog.

View Enhancement - Added two decimal places to the selection data on the graph.

View Enhancement - Changed page up/page down functionality to match Excel rather than open office calc.

View Enhancement - Bool8 is now supported for TOB(X) data files

View Bug Fix - Fixed a problem with the view grid mouse state missing the mouse up event allowing the data grid to scroll with the mouse when the mouse pointer is off of the application.

View Bug Fix - Trying to copy data from an empty column no longer causes an access violation

View Bug Fix - Fixed a problem where the last record was missing in the graph when an entire column was graphed

View Bug Fix - Fixed a problem where the number of points displayed in a line graph was one less than the number reported.

View Bug Fix - Fixed an unzoom/unpan issue that put the Y axis on a line graph in custom axis mode.

View Bug Fix - When scrolling in the graph the data grid view no longer scrolls when there is less than a page of data

View Bug Fix - Changed the file parser to be more tolerant of extra lines at the end of a file.

View Bug Fix - Opening an empty DAT file from the data collection results dialog will no longer lock view from opening subsequent files.

View Bug Fix - TOA5 files with no time stamp or record number will now open.

View Bug Fix - Fixed a binary file parsing issue where the record size for some files was being calculated incorrectly, resulting in erroneous offsets.

View Bug Fix - Fixed an issue where the y-axis didn't clear after removing a selection that was graphed using record numbers on the x-axis.

View Bug Fix - Closing View after viewing a binary file as text will now work.

View Bug Fix - Fixed panning then clearing line graph access violation.

View Bug Fix - Fixed time stamp comparison code that wasn't precise enough for some files.

View Bug Fix - View ill no longer fail to terminate a string when a null value was encountered. Non-string data in strings will no longer show up when null values are contained therein.

View Bug Fix - Boolean values will now show as -1 and 0 rather than true and false.

Split Enhancement - Added 'qq' to format string. Acts like hh except gives 24 at midnight.

Split Enhancement - Added two more custom date format strings TOA5 and 24TOA5. The former produces a TOA5 formatted timestamp. The latter does the same except with midnight set to 24:00:00.

Split Enhancement - Unicode support added.

Split Enhancement - Enhanced -time offset crossing year boundary. So on first day of the year, a negative offset can back up to previous year.

Split Bug Fix - Fixed HourArray and dayofyear format strings so that they work properly when a time offset is used. Also these fields were not properly quoted when Date vs Edate was used. Fixing this may break existing .PAR files. These (and the "Serial" format string) are intended to be used as the entire format string e.g. edate("dayofyear";4;3;2).

CardConvert Enhancement - Added 2400 hours at midnight support.

CardConvert Enhancement - Added Unicode support.

CardConvert Bug Fix - Fixed some issues with TOB1 files that grow over 4 Gb.

CardConvert Bug Fix - Fixed 'headers do not match' error displays.

PakBus Graph Enhancement - Added support for IPv6 addresses.

PakBus Graph Enhancement - Added Unicode support.

PakBus Graph Bug Fix - Fixed a bug where settings editor sub-panels were getting deleted twice if the settings were reloaded.

LogTool Enhancement - When the LogTool is running remotely and zip all log files is selected, files are now zipped up to a specific file on the server's machine, and then transferred to the client's machine to the location that the user selected.

LogTool Enhancement - When retrieving a zipped file from a remote server, the percentage of the file retrieved so far is now displayed.

LogTool Bug Fix - Delete Log Files and Zip Log Files are now only enabled if security level is Full Administrator.

LogTool Bug Fix - Fixed an issue where you could not Save/Copy/Print the text of a Low Level Log window after its internal buffer had been "filled".

Device Configuration Utility Enhancement - Added support for the NL200, CC5MPX, CDM-VW300 Series, TX312/TX320, NL240, AL200, CRS450 Series, SC-CPI, OBS500, EC120.

Device Configuration Utility Enhancement - Added ability for some devices to be configured over the network (using IP).

Device Configuration Utility Enhancement - The device type can now be categorized. This is controlled from the Options menu.

Device Configuration Utility Enhancement - Added an optional button to the Logger Control panel that will allow the user to retrieve the currently running program from any datalogger that supports retrieval (CR1000, CR3000, CR8xx, CR10X-XX, CR23X-XX, CR510-XX, CR5000, and CR9032).

Device Configuration Utility Enhancement - Added new settings for the CR1000, CR3000, and CR800 to configure the NL240 bridged network stack

Device Configuration Utility Enhancement - Added code to the datalogger passwd file editor dialogue that will allow the file, when written to the datalogger, to optionally be marked as hidden on the datalogger. This has been done in order to avoid having the file read by the web or FTP server since doing so could assist in breaking the datalogger security.

Device Configuration Utility Enhancement - Added support for a Bluetooth serial port.

Device Configuration Utility Enhancement - Enabled the SDI-12 option for the CWB100.

Device Configuration Utility Enhancement - Increased the length limit on the "PPP User Name" component of the "PPP Configuration" setting for the CR1000, CR3000, and CR8xx from 31 to 63 characters.

Device Configuration Utility Enhancement - Added ability to copy from help/description area. Also added copy and paste support to terminal.

Device Configuration Utility Enhancement - Changed the file selection controls in the browse configuration summaries dialogue so that a directory picker is used in conjunction with a list box that shows the possible files in the chosen directory. The directory picker has a browse button that brings up a standard directory browse dialogue.

Device Configuration Utility Enhancement - Added options for 300 fixed for the baud rate settings for the COM1-COM4 devices for the CR1000, CR800, and CR3000 dataloggers.

Device Configuration Utility Enhancement - Added IPv6 support.

Device Configuration Utility Enhancement - Added a file control panel for PakBus dataloggers that support file systems.

Device Configuration Utility Enhancement - Added support for a new setting, PakBus Encryption Key for the CR1000, CR3000, and CR8xx device types.

Device Configuration Utility Enhancement - Added Unicode support.

Device Configuration Utility Enhancement - Added store log files to the Options menu. The default value is off and when this is off, only minimal logging occurs. When this is on, normal logging occurs (including logging the PakBus password).

Device Configuration Utility Enhancement - Added support for new functionality in the CWS900 implemented with version 2 of the CWS900 operating system.

Device Configuration Utility Bug Fix - Changed the code that compares formatted setting values in the configuration summary comparison dialogue so that the comparison is performed in a case-sensitive fashion.

Device Configuration Utility Bug Fix - Increased the maximum security code (when connecting) from 65535 to 99999.

Device Configuration Utility Bug Fix - Changed the behavior of the "Edit .csipasswd File" button in the deployment panel for the CR1000, CR800, and CR3000 so that the value of the hide check box is preserved in the application configuration and restored when the dialog is created afresh.

Device Configuration Utility Bug Fix - Fixed a bug where a *.a43 pattern was used to search for SDM-SIO1 instead of *.hex

Device Configuration Utility Bug Fix - Fixed copy and paste.

Device Configuration Utility Bug Fix - Fixed a bug with the PakBus routes setting where the port number was not large enough to handle all of the values that the datalogger could use.

Device Configuration Utility Bug Fix - Now correctly report the European variant of the serial number.

Server Enhancement - Changed the behavior of the BMP5 file control command so that, if the original command specified that the data should be left in the datalogger tables, the server will preserve the data in its own cache table as well. This should provide a means to change the program without losing data from the cache.

Server Enhancement - Changed the parent/child configuration rules to allow a PakBusPortHD device type to be added as a child to an MD9 Passive device type.

Server Enhancement - Added IPv6 support.

Server Enhancement - Changed the code that parses table names, column names, unit strings, and process strings for BMP3 and BMP5 dataloggers so that these strings are assumed to be encoded as utf-8 rather than using the local code page. If these strings fail to convert as UTF-8, the local code page will be used to convert the strings to Unicode.

Server Enhancement - Added a timer to delay the automatic retrieval of table definitions by fifteen seconds

Server Enhancement - Added support for the new option for the server to send the "extended" version of the data broker data advise start acknowledgement message. This extended version allows whole arrays to be described with one entry instead of an entry for each array element. This is to support increased efficiency when dealing with large data records.

Server Enhancement - Added support for PakBus Encryption (AES-128).

Server Enhancement - Changed the device file enumeration transaction so that it can send a longFileSize attribute as well as a fileSize attribute. This change was made to support large (> 2 GB) file system capacities on the datalogger.

Server Enhancement - Added a code in the device file control transaction implementation to deal with the new compile, pause, and mark tables as full control option that is available for the CR1000 and cousins. This is a mechanism to allow recovery of data that has been lost on the datalogger after a power loss (the user forgot to set the run on power up bit) or after the user inadvertently sent a program to the datalogger.

Server Enhancement - Changed the BMP5 get compile results and get table definitions transactions to alter the compile results with a warning if there is a program running but there is no power up program running

Server Enhancement - Changed functions and classes that deal with file names and directory names so that they assume the use of Unicode encoding.

Server Enhancement - Extended the time that the PakBus/TCP Server will wait on a new connection before hanging it up from five seconds to forty seconds. Also added code so that this device will broadcast a hello request on new connections if no activity has occurred within five seconds of the initial connection.

Server Enhancement - Added a transaction log message that gets posted each time that the next time to poll gets calculated.

Server Bug Fix - Added code for the BMP1 table poll operation that will prevent the server from sending a hole collection command to the datalogger that is larger than the logger can handle. (This was already being done for the hole collection operation but was not for the table polling version.)

Server Bug Fix - Fixed a bug that could crash the server when multiple set value commands were queued for a mixed-array datalogger while the datalogger was in an off-line state. This could set up the conditions where an infinite recursion took place until the program stack was exhausted and the server crashed.

Server Bug Fix - Modified the code in the cache manager thread that adds records for a table so that older records will be eliminated if a set of records is larger than the size of the cache table. Failure to do this could result in inconsistent information for table blocks because too few records were "released".

Server Bug Fix - Fixed a bug that could crash the server if it was trying to open the link on a TCP serial port and the address look-up failed for the specified address.

Server Bug Fix - Fixed a bug where, if an exception was thrown when an incoming TCP messaging connection was handled, that exception would wind up crashing the LoggerNet server.

Server Bug Fix - Added code to handle the case when a communication error is reported by another operation in order to ensure that the logger lock was released.

Server Bug Fix - Added code to ensure that any reports associated with a device are removed when that device gets shut down. Failure to do this could lead to a crash if the device was deleted after being shut down

Server Bug Fix - Fixed a bug in the shut down code where the device was removed from the network map structure before its shutdown() method was called. On some networks, this could lead the server to throw an unhandled exception when it was being shut down.

Main PC400 Interface Enhancement - Added "Give feedback on PC400" menu item.

Main PC400 Interface Bug Fix - Fixed an issue where an access violation could occur if the delete key was pressed and held while the user okayed the "Delete Logger?" prompt.

Main PC400 Interface Bug Fix - Fixed an issue where the max time online dialog was not showing when monitoring or collecting data.

CRBasic Editor Enhancement - The CR200 precompiler can now produce .TDF files from within the CRBasic Editor and also can Show Labels.

CRBasic Editor Enhancement - Removed the Silent Compressed File mode and the Always Create a Compressed File mode. The user can still manually create a compressed file via the Edit - Create Compressed File menu item. Sending a compressed file to the datalogger is controlled via the Compressed File checkbox on the Save and Send dialog.

CRBasic Editor Enhancement - Enabled the Enter key for selecting instructions in the Instruction Panel. Previously the user had to double-click with the mouse.

CRBasic Editor Enhancement - Added the SDMCAN processing to the CRBasic Editor. This includes adding the "Select .PCK Values" button to the SDMCAN instruction edit box. This new feature facilitates the use of the SDMCAN instruction in the CRBasic Editor.

CRBasic Editor Enhancement - The search function now works as follows: If text is highlighted, the user can simply enter F3 or click the Find Next button and the text will be searched for without resorting to the find dialog. The last item searched for will be remembered even if the highlight has been removed. If the highlighted text is changed, the new text will sought after.

CRBasic Editor Enhancement - Bookmarks are now persistent from one CRBasic session to another. Bookmarks are saved when the file is saved.

CRBasic Editor Enhancement - Added functionality where the CRBasic Editor watches the hard drive copies of the files currently open in the Editor. If the date changes on one of the files (i.e., someone copies a new file over the existing one), a message is displayed in the Editor notifying the user that the underlying file has been changed and giving the user the option to reload from the underlying file

CRBasic Editor Enhancement - Added functionality to provide the capability to open a read only screen of a program that is already open in the Editor. This gives the user with very large programs the ability to examine multiple areas of the program at the same time if desired.

CRBasic Editor Enhancement - You can now continue an instruction onto multiple lines by placing the line continuation indicator (a single space followed by an underscore "_") at the end of the each line that is to be continued.

CRBasic Editor Enhancement - Changed the default for the Run On StartUp option for the Compile, Save, and Send dialog to True

CRBasic Editor Enhancement - The user can now turn the right margin line and the pagination lines off if desired.

CRBasic Editor Bug Fix - Fixed a bug so that selecting a file that does not exist from the Recent Files list no longer gives an access violation. This only occurred when there were no other files open in the editor.

CRBasic Editor Bug Fix - Fixed a bug so that ending a line with a comma will not hang CRBasic Editor for a Dim statement containing an array and multiple line initialization.

CRBasic Editor Bug Fix - Fixed a bug so that the CTRL+F processing was extended to function properly when multiple files are open in the Editor. This eliminated a List Index Out of Bounds error.

CRBasic Editor Bug Fix - Fixed a bug so that you no longer get an access violation when doing combinations of Ctrl+T, Ctrl+Q, and Ctrl+I.

CRBasic Editor Bug Fix - Fixed a bug relating to closing the toolbar when the CRBasic Editor has pending edits. A Save dialog with Yes, No, and Cancel is displayed. If you select Cancel, the toolbar did not shutdown but it would when the CRBasic Editor was closed later. The shutdown is now aborted if cancel is pressed.

CRBasic Editor Bug Fix - Fixed a bug where Rebuild Indentation could cause an access violation.

CRBasic Editor Bug Fix - Fixed a bug so that multiple Public statements used to initialize arrays do not give a duplicate variable name error for "}".

CRBasic Editor Bug Fix - Fixed a bug so that CRBasic will handle the variable scope and labeling issues created with function and subroutines containing local (Dim) variable declarations so that F9 and F10 display the variable lists properly depending on the cursor position.

CRBasic Editor Bug Fix - Fixed a bug so that a duplicate name error is not displayed when a public variable and a dim variable declared in a function or subroutine have the same name

CRBasic Editor Bug Fix - Fixed a bug so that entering a bookmark does not clear the Undo list.

CRBasic Editor Bug Fix - Fixed a bug so that, for an instruction like If IfTime(245,300,Sec) Then PortSet(7,1), the PortSet instruction is not wiped out when you insert new values in the IfTime instruction.

CRBasic Editor Bug Fix - Fixed a bug where if a statement with parameters is within an "inline" IF statement, the right-click(alt-click) did not bring up the parameter prompt screen.

CRBasic Editor Bug Fix - The CRBasic Editor is now restored from minimized when you click on it from the LoggerNet Toolbar.

View Enhancement - Added a new option "View - Lock TimeStamp Column" which will lock the timestamp column on the left of the data in the grid for all files that have a timestamp. This setting is global for all open tables, and persistent due to being stored in the inifiles.

View Enhancement - reated a new common axis for the line graph to show up on the right. Assignment of series to the right Y-axis is made using the popup menu accessed by right clicking a selection in the selection panel and clicking "assign to right axis". Single click selection of a series in independent axis mode has been re-instituted. Clicking on a selection will show its y-axis on the side to which it is assigned. Grid lines only appear by default for the left axes.

View Enhancement - Improved performance when working with array-based data files.

View Enhancement - You can now deselect columns that were created in a group of multiple columns by clicking their header.

View Enhancement - Y Axes on the line graph are now shown in scientific notation when the values are smaller than 0.0001 or greater than 999,999,999.

View Enhancement - The printout will now include the full header if "Show Full Header" is enabled.

View Enhancement - You can now clear an associated FSL file in the Array Definitions Dialog.

View Enhancement - You can now move the graph cursor left and right with the arrow keys. Moving the graph cursor to the edge of the visible data will cause the file to scroll in that direction.

View Enhancement - New selection mechanism that lets View Pro selections be made with the keyboard using the grid selection cursor with the arrow keys. Hit the space bar to select a whole column, or hold down the shift key and move the selection cursor with the arrow keys to select data.

View Enhancement - A "Copy Selection" menu item has been added to the popup menu on the grid view.

View Enhancement - Added two menu items, "Check All" and "Uncheck All", to the right click popup menu of the selection panel on the line graph.

View Enhancement - Improved Excel export and added column names.

View Enhancement - Added print/print preview capability for the Hex file viewing window.

View Enhancement - Modified the behavior of the Reset Grid button.

View Bug Fix - Fixed CSIDFT UShort values that were loading incorrectly.

View Bug Fix - Fixed zoom/undo zoom causing graph scale problem for Y Axes

View Bug Fix - Changes to the selection definition made in the Selection Definition dialog are now prompting updates to the associated line graph if there is one.

View Bug Fix - Refreshing a TOA5 file while the graph is open will no longer cause all selections axes to overwrite each other, nor will changing the line graph options or plotting options.

View Bug Fix - Files with an unrecognized file format will now automatically open as text.

View Bug Fix - TOB1 fractional values now shown with sufficient resolution.

View Bug Fix - Made more room for the X Axis on the line graph to prevent labels being cut off.

View Bug Fix - Fixed mixed array data array number parsing problem.

View Bug Fix - Mouse wheel now scrolls the data grid.

View Bug Fix - Fixed column labels for mixed array files where two columns were labeled '[0]'.

View Bug Fix - Fixed a problem where the line graph number of records was on less than the number of records selected.

View Bug Fix - Fixed timestamp formating problem when generating a timestamp for a mixed array data file with no FSL loaded.

View Bug Fix - Fixed a problem where the line graph plotting for some files caused all of the data to be plotted only in a thin portion on the left side of the screen, leaving a large gap to the right.

View Bug Fix - Fixed a problem where INFs & NANs at beginning of file wouldn't graph.

View Bug Fix - Fixed a problem where the "Open FSL File?" dialog was coming up behind View Pro when an array based file was opened from outside of View Pro.

View Bug Fix - Fixed a bug that caused an access violation that occurred with an empty TOB3 file.

View Bug Fix - Removed system tray icons for dialog windows.

View Bug Fix - Using the mouse wheel in the grid will now move the vertical scrollbar rather than the grid "cursor".

View Bug Fix - Fixed issue with ASCII printable files missing the first record in the grid, and mixed array binary files missing the first two records in the grid.

View Bug Fix - Fixed an issue where the last column of a mixed array data file was missing the last column after being associated with an FSL file.

Split Enhancement - Added a progress bar to the runtime.

Split Enhancement - Added the ability to use time ranges in the copy condition.

Split Enhancement - Added new "Time Sync to First Record" option to the Other dialog.

CardConvert Enhancement - Added a command line option to CardConvert.

CardConvert Enhancement - Changed the Source and Destination Filename displays to show long filenames with the '..' in the middle instead of the end. This make it easier to see the actual filename.

CardConvert Enhancement - Changed append file check such that file headers that match with warnings append without asking user. Files with severe warning or errors do not append. Log messages are shown in both cases but the user is not asked.

PakBus Graph Enhancement - Redesigned the settings editor panel used to edit the settings for PakBus devices.

PakBus Graph Enhancement - Added controls to the toolbar that will allow the user to control the scaling factor for the canvas as a percentage.

Device Configuration Utility Enhancement - Added a new item, "Off-Line Mode" in the file menu that will be enabled for many device types. When the user selects this menu item, the program will enter a session in an off-line mode. The values displayed will be derived summary files stored in the library and referenced in the individual device descriptions.

Device Configuration Utility Enhancement - Support has been added for Campbell Scientific's wireless sensors and wireless sensor base.

Device Configuration Utility Enhancement - Added support for the CS450 device type.

Device Configuration Utility Enhancement - Added stub support files for the CS120

Device Configuration Utility Enhancement - Redesigned the settings editor panel used to edit the settings.

Device Configuration Utility Enhancement - Added code to set the time stamp for spectral or time series data for the AVW2xx when read from the sensor to match the computer time when the measurement began.

Device Configuration Utility Enhancement - Added a button to the AVW2xx diagnosis panel (both on-line and off-line mode) that will allow the user to export the data being displayed in a tab separated file that is suitable for import into MS excel or open office calc.

Device Configuration Utility Enhancement - Added a button on the "Net Services" table of the CR1000/CR3000/CR8xx deployment panel that, when clicked, will bring up a dialog that will allow the user to edit the .csipasswd file on the connected datalogger. If there is no file present, it will create it.

Device Configuration Utility Bug Fix - Fixed a problem with loading an OS to an SDM SIO1.

Device Configuration Utility Bug Fix - Fixed a bug for float and double component types where the max and min values were enforced when they were not specified in the description. This enforcement was not a problem for most types because the default max and min values were set to the full range of a given type. However, for floating point values, the min value was being set to the smallest possible positive value for that type rather than being set to the most negative possible value for that type. The result of this bug was that, when the user attempted to set negative values, these would be rejected.

Device Configuration Utility Bug Fix - Changed the way that locales are managed so that they no longer depend upon the selected language.

Device Configuration Utility Bug Fix - Fixed a bug where the application event dispatcher was being deleted before the one shot timer for the application. This could cause an access violation when the timer attempted to dispatch events when there was no dispatcher.

Device Configuration Utility Bug Fix - Simplified the regular expression used to check the neighbor lists for the various ports on the NL100. The regular expression used previously would fail the check for when used with "1 5 10-20".

Device Configuration Utility Bug Fix - Fixed a bug with string setting components where, if the component value was set directly, the changed flag for that component was not set. This showed up with the CR1000 deployment panel as a failure to set the PakBus/TCP Password setting.

Server Enhancement - Changed the logon transaction so that the password is no longer sent to the server. This fixes an issue where the password was being sent in clear text.

Server Enhancement - Added code to tolerate some warnings that can result from trying to determine whether data can be appended to an existing file. If warnings are generated, these will be logged in the transaction log.

Server Enhancement - Added code that will allow a failure to initialize the TAPI layer to be tolerated. If the tapi layer can not be initialized, all transactions and operations associated with it will now either fail (in the case of dialing) or will return empty lists of tapi lines and/or country codes. This addresses issues that we have encountered with customers being unable to run LoggerNet when the TAPI service is disabled.

Server Enhancement - Added support for a new LgrNet setting, minConfigRewriteInterval, that controls the minimum interval at which the server will automatically attempt to overwrite its configuration file. The default value for this setting has been set to 15 minutes which is larger by a factor of three from the old interval that was used. These changes address complaints from customers with large networks who had observed that the server would appear to "lock up" for up to thirty seconds while the operation was taking place

Server Enhancement - Added code to support the new LgrNet Logon Ex transaction. This transaction should be much more secure than the old logon transaction because the password is not transmitted but rather a digest derived from the password and a server generated random number will be sent. This new transaction uses the same features as the CRAM MD5 authentication protocol used with email servers.

Server Enhancement - Added code to ensure that the sysinifiles directory is backed up when a snapshot is created under the windows version. This will ensure that the taskmaster.ini file as well as other ini files will get backed up and, subsequently, restored.

Server Enhancement - Implemented an optional parameter for the device clock set command that allows the client to specify the time to which the device clock should be set.

Server Enhancement - Added support for the CRS450 device type. This device is a CS450 pressure transducer with datalogger capabilities.

Server Enhancement - Modified the code that records logon attempts in the transaction log so that the IP address of the client is printed along with the application name and user name.

Server Enhancement - Added support for the three new LgrNet settings: applicationDir, workingDir, and dirSeparator.

Server Bug fix - Changed the code that checks the input buffer for a full duplex echo operation so that, if bytes are received but none of these matches the first byte of the echo pattern, these bytes will be read from the buffer, thrown away but the watch dog timer for the operation will not be reset. This has the potential to address a "stuttering" effect that can occur on a link with a lot of latency where the responses from previous communication attempts get processed before the expected response is received.

Server Bug fix - Fixed a bug associated with serial port support (likely TAPI as well) that could lead to a lock-up.

Server Bug fix - Added code to ignore the hangup delay setting on the PakBus port when it is connected through a phone link. This is needed because, once the "off-line" message is sent to the connected logger, the logger is free to shut down the link from its side. It does little good for us to try to maintain that link under these circumstances and has actually caused a crashing/lockup problem.

Server Bug fix - Fixed a bug with the XPB (used with CR10X-PB, CR23X-PB, and CR510-PB loggers) implementation of the program file send transaction where the logger transaction timeout was not cleared after receiving a response to a previous send command. If there was a delay in sending the next command, the transaction could time out.

Server Bug fix - Fixed a bug where, if communications for an RF-TD base became disabled while a send network description operation was active, that operation would not get removed from the base. The result of this bug was that no new network description could be sent thereafter to the RFbase until the loggernet server was shut down.

Server Bug fix - Fixed a bug with the BMP1 send network description operation where, if the operation is interrupted because of max time on-line expiration, the operation reference kept by the RF base device object was not cleared. This prevented any future attempts to send the network description for that device.

Server Bug fix - Changed the server build script for Linux so that the 64 bit file offsets will be used by the run time library rather than the default of 32 bit file offsets.

Server Bug fix - Fixed a potential bug that could occur if a check for duplicate records was posted but then abandoned by its client (the particular case being addressed was data collection), That check would not get removed from the queue of other checks and, as a result, all new records processing would get stuck for this collect area.

Server Bug fix - Added a state to the BMP1 data polling operation to recognize when we are waiting for a check on the newest record. Also added code in the BMP1 message handler that will prevent us from processing an incoming message when we are not in a state where we are looking for that message.

Server Bug fix - Added virtual methods to the base PakBus node class that can be called when messages are sent to start or end a PakBus session. These methods have been overloaded in class Bmp5::Datalogger to ensure that the clock schedule is honored. This addresses a problem that has been observed with various Fat Spaniel customers that can result in their station times being reported as off.

Server Bug fix - Added a new timeout for BMP1 transactions. The timer for this condition starts when a message is posted for a BMP1 transaction to send. It will get cleared when the router is ready to send that message and it will get reset when any other transaction has a chance to send a message. The purpose of this timer is to guard against the rather rare cases where the RF-TD base can get stuck in a mode where it does not ever raise its RxRdy bit.

Server Bug fix - Fixed a problem in the base class that implements the PakBus serial packet protocol where, if communications became disabled, all links were immediately abandoned with no attempt to send "off-line" serial packet messages. On most link types, this was relatively harmless. However, on RF95 type links, this could lead to problems because the datalogger would not drop the CS I/O ME line so the subsequent attempt to "undial" the link was doomed to fail.

Server Bug fix - Fixed a bug where the hangup delay setting was not honoured for the PakBus/TCP server device type.

Server Bug fix - Added an optimization to the code that generates the parts of the configuration XML structure associated with device and collect area settings. The SettingCollection class as well as the Setting class will now cache the XML structure when the settings are read or are generated for the first time. From that time forward, the only parts of the structure that have to be changed are the parts associated with settings that have changed. This has the potential to address a problem where it was taking upwards of 2 minutes to generate the XML structure.

Server Bug fix - Added a optimization with the statistics collections used by devices. Previously, the statistics table name was generated each time that it was needed from the device name and the statistics type name. This could represent a significant CPU load each time that statistics needed to be updated.

Server Bug fix - Added code to the operation in the cache thread that checks for the uniqueness of "new" records received from BMP1 and PakBus dataloggers that will catch any exception thrown during that operation and ensure that the "client" collect area gets the notification that the check is complete. Also added code in this event to post a failure message in the comms logs since otherwise, the error could slip by unnoticed. This may have been the cause of some lockups.

Server Bug fix - Fixed a bug where, if a session was closed on which a clock set transaction was waiting (not yet active), that transaction would not get deleted. The result of this was that, when the clock set was complete, the server would attempt to report the outcome for a transaction and session that was no longer valid. This could lead to a crash

Server Bug fix - Fixed a bug associated with restoring device and collect area settings where, if a setting was not stored in the configuration file when the network map was restored, the cached_xml reference for that setting would not be set when the setting needed to be written. The result of this bug was that, under some conditions, attempts to save the network map would fail.

Server Bug fix - Fixed a bug in the CoraServer destructor that would throw an exception resulting in a Linux segment violation when the server was not startable (this was due to a file write permissions error in one test case but can also be due to exceeding file system quotas).

Server Bug fix - Fixed a bug where automated clock check/sets were not working for NTCIP-ESS type devices.

Server Bug fix - Added code in the link failure event handler for the root level device class (serial ports, TCP serial ports, etc.) to avoid calling on_link_failure() or changing the line state if an open is pending. This code was already setting a one second timer following which it would report an open failure (this delay was to avoid resource exhaustion that could occur under some race conditions). If another request was made while the delay was pending, that second open attempt could get prematurely clobbered when the timed failure event was handled.

Known Issues - The use of TAPI modems may result in blue screens of death. The user is encouraged to use conventional modems instead of TAPI modems.

Known Issues - In View, the FSL file must match the *.dat file or an access violation may result.

Known Issues - Instabilities in the drivers for USB to RS-232 adapters and in the adapter cables have been noted. If problems are encountered, updated drivers should be installed and/or the adapter cable should be swapped out.

Main PC400 Interface Enhancement - New look and feel.

Main PC400 Interface Enhancement - Can launch DevConfig from the PC400 Toolbar.

Main PC400 Interface Enhancement - A connection made from the Clock/Program tab is now subject to the Maximum Time On-Line configured in the EZ Setup Wizard.

Main PC400 Interface Bug Fix - Fixed hot keys to work regardless of where the focus is.

Main PC400 Interface Bug Fix - Fixed problem with missing DEF files when PC9000 is already on a machine and then PC400 is installed.

Main PC400 Interface Bug Fix - Fixed a problem with there being only 5 dataloggers available when PC400 and Short Cut standalone are both installed.

Main PC400 Interface Bug Fix - Changed "Status Table" menu item to "Station Status" for consistency with other products.

Main PC400 Interface Bug Fix - Fixed an error when deleting multiple program files using File Control.

EZSetup Wizard Enhancement - Ability to rename a station.

EZSetup Wizard Bug Fix - COM Port field does not allow invalid characters including the semi-colon. This was causing PC400 to lockup.

Short Cut Enhancement - Added support for the CR9000X, the ET107, and the AVW200.

Short Cut Enhancement - Added "Advanced" tab which shows program and launches CRBasic Editor.

Short Cut Enhancement - Added "Send Program" to "Results" tab.

Short Cut Enhancement - Added user defined "Custom Sensor Files".

Short Cut Enhancement - Added the ability to manually set advanced outputs to high or low resolution.

Short Cut Enhancement - Added new sensor files for the CMP3 Pyranometer, the IRR-P Precision Infrared Temperature Sensor, the JC Ultrasonic Depth Sensor, the CNR2 Net Radiometer, the CS106 Barometric Pressure Sensor, the OBS-3+ Turbidity Sensor, the 03002 Wind Speed and Direction Sensor, the 105E (chromel-constantan) Thermocouple, the WindSonic1 (RS-232) Two-Dimensional Ultrasonic Wind Sensor, the WindSonic4 (SDI-12) Two-Dimensional Ultrasonic Wind Sensor, the HMP155 Temperature and Relative Humidity Sensor, the SR50A Sonic Ranging Sensor (SDI-12 Output), the CS450/455 Pressure Transducer, a Vibrating Wire Sensor (for generic vibrating wire sensors and the AVW200), and a saturation vapor pressure calculation

Short Cut Bug Fix - The CR9000 pre-compiler was left out of the 2.6.0 and 2.6.1 releases. The result was an error message (pre-compiler not found) when trying to "Finish" a CR9000X program. The CR9000X program was being saved. It just wasn’t error checked.

Short Cut Bug Fix - In 2.6.0 when attempting to add 4-wire 107 Temperature Probes to an AM16/32, only zero was available for repetitions thus a user could never accomplish this configuration. Not an issue in 2.5.4 and fixed in 2.6.1

Short Cut Bug Fix - Fixed various issues with drag-and-drop of outputs in the "Selected Outputs" grid of the "Outputs" screen.

Short Cut Bug Fix - Fixed issues with Windows "Regional and Language Options" being set to a region that uses decimal commas instead of decimal points.

Short Cut Bug Fix - Fixed some issues in the "Advanced Outputs" screen UI and resulting code.

Short Cut Bug Fix - Fixed "RichEdit line insertion error" message issue on Windows computers whose "Regional and Language Options" were set to Chinese.

Short Cut Bug Fix - Fixed major formatting issues on the "Summary" tab after "Finish"ing a CRBasic datalogger program.

CRBasic Editor Enhancement - Save and Encrypt.

CRBasic Editor Enhancement - Local Variables For Function. The F9 and F10 variable list popup menus will include the local variables for a specific subroutine or function if the cursor is in that subroutine or function.

CRBasic Editor Enhancement - Insert User-Defined Function Name (F11).

CRBasic Editor Enhancement - GoTo User-Defined Functions and Subroutines (Blue Arrow on Button Bar).

CRBasic Editor Enhancement - Added CTRL+Y Shortcut Key To Delete Line.

CRBasic Editor Enhancement - Added several options to the Editor Preferences dialog box: Variable Name Matching, Create .TDF File at Compile, Clear Undo/Redo List on File Save, Syntax Highlighting for Variables and Local Variables.

CRBasic Editor Enhancement - Drag And Drop Files Onto the CRBasic Editor Workspace To Open The File.

CRBasic Editor Enhancement - Select Multiple Files For Opening In The CRBasic Editor.

CRBasic Editor Enhancement - Support For Custom Voice Files For The VoiceSpeak Instruction.

CRBasic Editor Enhancement - Alternate language support.

CRBasic Editor Bug Fix - Fixed problems in the search and replace algorithm.

CRBasic Editor Bug Fix - Creating a compressed file will not strip the spaces between the instruction and a comment.

CRBasic Editor Bug Fix - Can now compile a CR200 program before it is saved.

CRBasic Editor Bug Fix - Start bookmark #'s with 1 rather than 0.

CRBasic Editor Bug Fix - Inserting File into Compressed File no longer causes error.

CRBasic Editor Bug Fix - Fixed Out of memory error if you do consecutive CTRL+Is.

CRBasic Editor Bug Fix - Wrong Pick lists were displayed w/two files opened.

CRBasic Editor Bug Fix - Now recognizes sub & function variables.

CRBasic Editor Bug Fix - Right clicking function in if statement was not opening the function dialog.

CRBasic Editor Bug Fix - Fixed a problem with using Save and Send option to send a program to a CR200 Series datalogger.

Edlog Bug Fix - A warning shows if there is a p3 in both table 1 and table 2..

Edlog Bug Fix - If you search for a string that does not exist, acknowledge the info box that says as much, and then search for a new string that does exist, when it is found you cannot use your cursor keys to move off of the highlighted string.

RTMC Enhancement - Added many new functions for expressions including string functions, time functions, start option functions, and functions with state.

RTMC Enhancement - Added ability to declare aliases for data values used in expressions.

RTMC Enhancement - New layout toolbar

RTMC Enhancement - New Edit - Preferences menu item that allows you to set graphics options and the visual theme. (Available in both Development and Run-Time.)

RTMC Enhancement - Net Edit - Customize menu item that allows you to customize RTMC's toolbars and menus. (Available in both Development and Run-Time.)

RTMC Enhancement - Added panning functionality to charts in RTMC Run-Time.

RTMC Enhancement - Added ability to acknowledge all alarms on a screen by right clicking.

RTMC Enhancement - Added a transparent option and a pointer width option to the gauge.

RTMC Bug Fix - Fixed table component keyboard navigation.

RTMC Bug Fix - Can't Acknowledge Audible Alarm - Multi-State.

RTMC Bug Fix - Pointer behind labels on gauges.

RTMC Bug Fix - Fixed a problem where you could rename a screen to a name that already existed.

RTMC Bug Fix - Fixed a bug where renaming a screen was causing RTMC to crash.

RTMC Bug Fix - Fixed a bug where changing the screen order was causing RTMC to crash.

RTMC Bug Fix - Fixed a bug where pasting in a file (jpg, exe, etc.) was causing RTMC to crash.

RTMC Bug Fix - The Set Point and Digital were displaying "0.0" for a blank string variable. It is not blank by default.

View - Maintains ease of use of former data file viewer.

View - Large file processing with responsive loading and scrolling of files.

View - Number of traces per graph is not limited.

View - Graph type supported: Line Graph.

View - Supports graphing by record number for files containing gaps in the timestamp data.

View - Vertical Graph Cursor.

View - Zoom capability on graphs.

View - Scrolling supported from the data window and from the graphs.

View - Print preview and print for graph.

View - Save graph to file as BMP, JPEG, WMF, EMF, or PCX.

View - Directly opens binary files (TOB1, TOB2, TOB3).

View - Supports files without record numbers.

View - Specify graph width by time or by number of records.

Split Enhancement - Added time offset.

Split Enhancement - Added log files.

CardConvert Enhancement - CSIXML file support.

CardConvert Enhancement - More flexible on append, i.e. allows environment data to have changed.

CardConvert Bug Fix - Fixed problems with base file names when appending and using date-time filenames.

CardConvert Bug Fix - Added constraints so sliders cannot set window sizes to 0.

CardConvert Bug Fix - A TOB1 file, which contains no record number or timestamp, resulted in an Exception error when CardConvert tried to convert it.

CardConvert Bug Fix - If you were appending to an existing data file and baling, baling worked unless there was missing data such that the first record to append should be in a new bale rather than the in the same bale as the last record from the previous run.

CardConvert Bug Fix - Open a bad DAT file in CardConvert, do a basic conversion to TOA5, and when you pressed the Convert button, then CardConvert would stop running and disappear.

PakBus Graph Bug Fix - Fixed problem where the PB Graph went blank and did not refresh after second datalogger is deleted.

LogTool Enhancement - Added ability to zip log files.

LogTool Enhancement - Added ability to delete all log files.

Server Enhancement - Implemented the LgrNet zip logs transaction that was added to version 1.3.10.13 of the cora server interface.

Server Bug Fix - Fixed an issue with creating data files larger than 2 gigabytes.

Server Bug Fix - When program table defs changed, the backup file is created by a "rename" rather than a "copy".

Server Bug Fix - In the RF95T base the low level poll setting values were not read from the server configuration file when the server was started. The result was that the low level poll interval was always reset to its default value.

Server Bug Fix - The time-out for the BMP1 data advise operation was being set to a value that was far too long by orders of magnitude.

Server Bug Fix - If a BMP1 station received a data collect response after collection was aborted, the server could crash.

Server Bug Fix - Added code to evaluate the an RF95T base's network description on successful completion so that, if the network was changed while the description was being sent, a new operation will be posted.

Server Bug Fix - Added code to the classic datalogger synchronization sequence so that, if the datalogger is on an RF95 link, two carriage returns will be transmitted back-to-back rather than just one followed by retries spaced by the link response time.

Server Bug Fix - Added code to prevent the file control operation from getting table definitions from the logger when the program is stopped in order to send an operating system via BMP5.

Server Bug Fix - Fixed a bug involving RF95 links with repeaters where, if a lot of the dataloggers in the RF network had requests pending at the same time and the server was unable to communicate with the RF base, only a portion of the pending requests would fail as a result of the failure on the base.

Server Bug Fix - Added time for file send and file control transactions so that the datalogger has time to finish rebooting before PC400 tries to communicate.

Server Bug Fix - Fixed a bug in the LgrNet List Comm Ports transaction where, on certain host computer configurations, the underlying call to EnumPorts() could fail and lead the server to attempt to allocate too much memory.

Server Bug Fix - Added code that will prevent the cache manager thread from "bailing" its command queue while the LgrNet create backup file transaction is active.

Server Bug Fix - When a data file reaches 2 gigabytes it appears that a seek fails and the new data is written to the start of the file.

Server Bug Fix - TAPI connect results in blue screen w/some modems. (Note that problem is not completely fixed.)

Server Bug Fix - Fixed an issue which created a "stuttering" effect that can occur on a link with a lot of latency where the responses from previous communication attempts get processed before the expected response is received.

Server Bug Fix - Added code to removed an "orphaned" active brokers when the server is restored from an XML structure (the new server config file).

Server Bug Fix - Fixed a bug associated with serial port support (likely TAPI as well) that could lead to a lock-up in the overlapped I/O version of execute() if ReadFile() returned ERROR_IO_PENDING. The old code attempted to get the overlapped result if the return code was not equal to ERROR_IO_PENDING. It should have been doing this if the last error equal to ERROR_IO_PENDING. With some drivers (FTDI), this would lead to the call to GetOverlappedResult() not returning which could eventually lead to a server lock up if the main thread was waiting for the serial port thread to end.

Server Bug Fix - Fixed a bug on in the code that processes table definitions from BMP3 loggers (CR5000 and CR9000) where the program_running flag was not set appropriately when a table other than the status table was encountered. As a result, in a merge update, "old" tables were not deleted because the program_running flag was not set.

Server Bug Fix - Fixed a bug in the code that processes table definitions from a BMP3 logger where the program information setting would not get set to indicate that there was no program running when table definitions were refreshed without the reset option. This could lead pc400 and pc200 to attempt to keep polling the datalogger.

Server Bug Fix - Added code to recognize when a BMP5 datalogger program has been paused as opposed to being stopped (the datalogger will return a value of 3 rather than 1 or 2). When the logger is in this state and table definitions are refreshed, any old collect areas that are no longer present will now be erased.

PC400 Install Enhancement - Default "Campbell Scientific" directory in the Windows Start Menu.

PC400 Install Enhancement - Shortcut to the PC400 Manual in the Windows Start Menu "Campbell ScientificPC400PC400 Manual".

PC400 Install Enhancement - Supports the common application model.

NOTE: Support for Windows NT has been removed.

Enhancements: Applications have been updated to run on Windows Vista (including a new help file format).

New diagnostic window displays error messages when there is a communication failure.

Code has been added to restart the server if an unhandled exception is caught while processing windows events.

The network map is now saved in an XML format, which makes it more robust. NOTE: Network maps from PC400 1.5 are not backwards-compatible with previous versions of PC400.

Improved the algorithm for setting datalogger clocks over slower communications links.

Added support for long file names for CR5000 and CR9000X dataloggers.

Added support in the server for BOOL8 variable types.

Increased intrinsic time-out for phone modems to 2 seconds.

New transaction log message that is produced when the server renames an existing data file rather than append to it.

Increased the minimum time between PakBus Serial Packet ring packets from two seconds to 10 seconds.

Improved hints for toolbar buttons.

If you attempt to restore a network when connected to a datalogger, PC400 will disconnect from the datalogger first and then restore the network.

Added a Time of Fill column to Datalogger Status window that shows the estimated time each table will fill.

NAN values for Long integers are now displayed as -2147483648.

Pause button added to Terminal Emulator.

Terminal Emulator window can be resized.

Support added for backspace character in Terminal Emulator.

Bug Fixes: A mixed array CSV file was being falsely detected as a binary file when it began with a comma rather than a number.

PC400 was converting 7999 to INF for the TOACI1 file formats.

The strictest Data Execution Prevention setting in Microsoft Windows was causing access violations upon trying to run PC400.

The server was hanging up a serial link with a CR9000X during a program file send.

When Maximum Time On Line was exceeded for a phone to RF link, the RF modem and the datalogger should be left in an on-line state until they timed out.

The default maximum time on-line for CR5000 and CR9000X dataloggers on a phone modem was 0 (unlimited). It is now set to 10 minutes.

A PakBus port no longer sends a "Goodbye" message to the datalogger when hanging up the link.

With table-based CR10X/CR23X/CR510 dataloggers doing data advise, if a table came in with no records, any tables after that which did have records were ignored.

Link failures were not handled properly for some operations including the program file receive and the program file send operations.

Extended the time that the server will wait to check for overwriting its configuration file from one minute to five minutes since this check uses processing time.

Fixed an issue where the server could crash if it tried to write to a log file that was locked by some other process, such as a virus scan program.

Added a timer to monitor the server's shut-down process.

Added time for file send and file control transactions so that the datalogger has time to finish rebooting before LoggerNet tries to communicate.

There were odd characters at the end of lines in the final screen of the Backup Network wizard.

Setting a value in a multi-dimensional array for CR5000 and CR9000(x) dataloggers was setting the wrong element of the array.

When a program was retrieved from a datalogger, the file extension was not automatically added.

Grid was shifting in the status table when the scroll button was pressed, making the information hard to read.

If the data values were updated on the Monitor Data tab when you tried to edit a value, the value you had selected would become unselected.

Allow 5 digit security codes.

# symbol was not allowed in phone modem dialing strings.

When a datalogger name was changed by the user, the output file name was not being updated.

If values from a Public table were added to the Monitor tab twice and the update interval of the display was slower than the datalogger scan rate, the Monitor would not update the second set of Public values.

Fixed problems associated with using spaces in datalogger station names.

When dual monitors were used and PC400 was last opened on the secondary monitor, when it was reopened it would shift back to the primary monitor.

PC400 did not resume when the computer went into standby mode.

Table definitions had to be retrieved twice for a CR5000 for them to be valid.

Disallow invalid characters to be entered into Monitor Data tab.

Known Issues: In PakBus Graph, if you ping a device that cannot be reached, the ping window will close.

EZSetup Enhancements: Improvements made so it can be navigated without a mouse.

Three modems added to Modem Database - Lucent WinModem, Conexant, US Robotics 56K USB.

File Control Bug Fixes: In some instances the CRD would appear to be the selected device, but the directory displayed would be for the CPU (or vice versa).

The ability to download an OS via File Control has been removed.

Non-program files could not be sent to the datalogger using File Control.

Card Convert Version 1.3 Enhancements: Updated to support translation to other languages.

Added ability to save a day of year for table-based timestamps.

Bug fixes: Repairing an empty table yielded an error.

In certain instances changes to the Destination File Name dialog were not saved.

Processing data based on date/time with 0 for the time intervals would lock up Card Convert.

Appending data would use last file name instead of Destination File Name.

CRBasic Editor Version 2.8 Enhancements: Added a Save and Send option which allows you to send a program to a datalogger from the Editor.

Added the option to save a compressed file (stripped of remarks and spaces).

New F9 functionality inserts a variable at the cursor location (existing F10 functionality would overwrite existing variable).

Added the ability to turn off syntax checking.

Options | Show Labels will show the table name, output interval, and field names for the Public table and all output tables.

Improved precompiler messages.

Bug Fixes: Files with an ampersand in the file name could not be opened from the Recent Files List.

Cleared bookmarks would return after inserting a variable.

Next/Previous Bookmark would move to bookmarks in the order they were declared, not in the order they appeared in the program.

Print Preview would set margins to .01 less than the value entered.

If no program was opened, the Editor always defaulted to files with a .CR2 extension. The default is now .CR*.

The Editor always tried to save "Save As" files with uppercase letters.

Printing in Landscape mode was not repaginating the file.

Subroutine arguments were showing up in variable list.

DevConfig 1.9 Enhancements: File | Browse Config Files will let you view the saved configuration file for a device.

More time added to the end of the operating system download process to help avoid the user removing power from the device before the OS load finishes.

Bug Fixes: Problem with the XML configuration file header which would cause it not to render properly in a browser.

Screen redraw algorithm could result in black boxes on the application window.

Improved OS download for CR9000X.

Edlog 2.6 Bug Fixes: Compiler didn't warn of a Table 2 that had instructions but an execution interval of 0.

Disallow spaces in P84 table names.

Screen was repositioning when setting reps to a value greater than 1 and pressing Enter.

In some instances, the Edlog window would not close.

PakBus Graph 1.8 Enhancements: In the (right click) Edit Settings mode, the current settings of the device can be viewed and printed (Summary button), or a new configuration can be loaded in to the datalogger (Read File button).

Now functions as a shared component in CSI's software. This means any time a newer version of the software is installed (with LoggerNet, PC200W, PC400), the old version will be updated (rather than having two different copies on the PC).

Bug Fixes: If you edited a setting in the datalogger, that setting would not be applied unless you clicked a field other than the one being set to the new value before pressing Apply.

When making changes using Edit Settings, there was no warning if the changes were not applied.

If you resized the window to a very small state, it did not redraw correctly when it was resized larger.

Split 2.6 Enhancements: Can process larger files.

The "bad data" indicator will flag bad data, even if there is no screen display.

Screen display indicates how long it took the file to process.

Bug Fixes: Record numbers greater than 14 characters could not be formatted.

Subsecond data now truncates rather than rounding.

New Functionality and changes: Support for the CR800 datalogger.

New Backup/Restore options for saving a copy of the network map, and restoring from that copy if needed.

Improvements to the Ports and Flags window for all datalogger types.

Can now type in a COM port number in EZSetup, if it is not displayed in the list of available ports.

CRBasic editor allows printing select pages.

Added "library file" support to CRBasic editor.

Added scroll bar to message window for CRBasic Editor.

Support for new instructions in the CR1000, CR3000, CR9000X, and CR5000 datalogger operating systems was added to the CRBasic Editor.

CardConvert: Added ability to store processed files in uniform sized packets based on time.

CardConvert now supports a file naming scheme based on timestamp of data.

CardConvert: Improved user interface.

CardConvert: New CSV custom file format added. This new format stores the data to a comma separated format that can be customized.

Resolved issues: When custom labels were entered for Ports/Flags dialog, these labels were not maintained when the dialog was closed.

Transformer could only open CRBasic once per session.

Multiple changes made to Spanish language files.

With a certain series of keystrokes, the CRBasic Editor would return an error when Save was pressed.

DevConfig would return an "unhandled exception" error when trying to connect to a storage module.

CardConvert output file directory no longer defaults to card.

CardConvert: Creating a new output directory off of the root directory sometimes created the directory in the wrong place.

Resolved a Range Check error in Split when using a Starting Offset and the Date function.

Fixed a problem with Split's WDQS(n) function when wind direction was 360 degrees or greater.

A change was made to the algorithm used for checking/setting clocks. The change improves the synchronization of clocks over slower communication links.

New functionality and changes: Added support for new CR3000 datalogger throughout the application.

More flexible Ports and Flags dialog box in Connect Screen that now displays Boolean variables for dataloggers that support that variable type.

Updated Status Table dialog box from Tools | Status Table for more statistics for datalogger and program tables. Added tab to show graphically when the datalogger will start overwriting final storage tables.

Added alternative language support for main screens by downloading language files from Campbell Scientific web site (www.campbellsci.com/downloads).

Short Cut 2.5.1: Added wizard-like user interface.

Added support for new CR3000 datalogger.

Added images for most sensors to help select the correct sensor.

Support for additional colors on the wiring diagram (e.g., brown and orange).

New sensor files: CS300 Apogee PYR-P Pyranometer and (for the CR2xx dataloggers only) the CS15 Current Transformer.

User selectable print options (Results, Summary, Wiring Diagram, Wiring Text) added to the last step.

Improved Advanced Outputs, including Ring and Fill and Stop table options, store Filemark when a flag is toggled by the user, option to set a flag high when a table becomes full, Data Event output option.

Use control ports for tipping buckets, freeing up pulse ports for higher frequency measurements.

Fixed a bug in Short Cut 2.5 that created illegal 21X programs when instructions used integration.

CRBasic Editor 2.6: Added Back/Next buttons to parameter editing pop-up.

New GoTo function and Bookmarks for navigating in larger programs.

Faster repainting of the screen on very large programs.

Now creates a binary (*.BIN) program file for sending to CR2xx dataloggers when compiling the program.

Transformer 1.1: Support for converting CR23X mixed-array programs to CR3000 CRBasic programs.

Support for converting CR510 mixed-array programs to CR1000 CRBasic programs.

CardConvert 1.1: Added a "repair" option for corrupted TOB2 and TOB3 files from PC Cards or compact flash cards.

Communications Server 1.3.6.41 (since 1.3.5.x): Fixed bug in the server that caused it to crash (external exception) if a Numeric or Graphic Display launched from the Connect Screen tried to display any values from a table (inlocs, public, or final storage) in a table-based datalogger (Edlog or CRBasic datalogger) that had more than 227 fields.

Fixed a bug in the server that prevented it from collecting "most recently stored records" from a table-based datalogger if the datalogger had not stored at least that many records since LoggerNet’s last collection.

Added support for communicating with CR1000s with newer operating systems (>=CR1000.Std.04.obj) that work with CFMs.

Added capability to abort the program send command for all dataloggers.

Implemented a new CoraScript command ("create-backup-file") to back up the server’s network as well as the data cache and collect areas (and other files as stipulated by the user, including use of wildcard "*" and "?" characters) while the server is running. This makes backing up the full state of the LoggerNet server more practical. This command can be run from within a batch file with other CoraScript commands on a schedule using the TaskMaster. Along with this, also implemented the command to restore the network from that backup file ("lgrnet-restore-snapshot").

Fixed a bug related to processing table definitions from BMP3 dataloggers (CR5000 and CR9000) that prevented data collection when a table contained boolean variable types.

Added WinSock error codes to the Comms log for troubleshooting IP connections.

Increased the minimum time out for an Edlog datalogger to compile its program from 90 seconds to 180 seconds (three minutes).

Changed handling of FP2 formatted data to recognize INF and –INF values.

Can now change the case on device names without upsetting the other settings for the device.

Added code for the RF400 series of radios to make call-back functional when the radios are in "transparent" mode (i.e., dialed, not in PakBus mode). This is accomplished by setting the base radio mask to 0xFC00 (ATMK FC00 ) when the link is being hung up or when the link is being set up to receive call-back so that it’s a predictable address for the remotes to dial.

PakBus Graph 1.5: Allows users to "lock" PakBus devices to a fixed location on the screen to make viewing the network easier.

CardConvert 1.0: Replaced the TOBConvert utility with CardConvert to support binary data types and files from CR1000 compact flash cards.

New features in CardConvert include: can increment file names to prevent mistakenly overwriting files; remembers settings and directories; better feedback about conversion progress and results, optionally will select unused filenames for output filenames; simple help; launched from toolbar rather than Start menu; allows you to open View from its main screen to view the data files; creates new files when encountering filemarks and (new) "removemarks."

DevConfig 1.3: Added several devices, including the RF401 spread spectrum radio w/ PakBus capability, CC640 camera, CD295 DataView Display, and TGA100.

Added new settings for other devices, including the CR1000, NL100, and SC105.

Short Cut 2.4: Reverted to default.plt and table.plt sensor files similar to those in Short Cut 2.0-2.2 for measuring the program signature in order to preserve forward compatibility so that Short Cut can edit programs created in those earlier verisons. Programs created in Version 2.3.x will have to be recreated to be used in this and subsequent versions.

Short Cut 2.3 and 2.3.1: Added support for alternative groups of sensor files, specifically to support sensor files developed for sensors specific to European users. The SCWin.EXE was modified to read new settings in the sensor files and display a menu item under the Settings menu to offer options for viewing "Campbell Scientific Inc" or "Campbell Scientific Ltd" sensor groups.

Added support for interfaces requiring special wiring between the datalogger and sensors: LLAC4 (4 channel device for reading low level AC signals on digital control ports), SW12V (standalone switched 12V relay cable for HMP45C sensors), Terminal Input Modules for the AGS Level Sensor and CNR1 Net Radiometer, A547 interface for the CS547A Conductivity and Temperature Probe, QD1 interface for quadrature shaft encoders, SDM-AO4 4-Channel Analog Output Module, and SDM-CVO4 4-Channel Current/Voltage Output Module.

Added support for outputting data to the CR1000’s compact flash (CFM100).

Added new CSI sensor files: 107 Temperature Probe (4-wire version) for multiplexors, 108 Temperature Probe (3-wire) for multiplexors 108 Temperature Probe (4-wire) for multiplexors, AGS Level Sensor (Metritape), CNR1 Net Radiometer, CS100 Barometric Pressure Sensor, CS205-LC Fuel Temperature Sensor for the MetData1 and ET106, CS215 Temperature & Relative Humidity Sensor, CS505-LC Fuel Moisture Sensor for the MetData1 and ET106, CS512 Dissolved Oxygen Probe, HMP45C (6-wire) Temperature & Relative Humidity Sensor on the SW12V, NRG #200P Wind Direction Sensor, NRG #40 Wind Speed Sensor, Device for Analog Input from SDM-AO4, Device for Current/Voltage Input from SDM-CVO4, WindSonic-LC 2-D Sonic Wind Sensor for the MetData1, Wind Run Calculation, Fixed bug that prevented workable DLD files for 21X dataloggers for sensors that used 50/60 Hz rejection options for analog voltage integration.

SMS 4.9 1: Fixed a problem with collecting data from SM16M modules set for fill & stop. Data collection would proceed as expected, almost until the last "chunk" and then would either fail with a "too many errors message" or just get in a loop where it tried over and over and over to collect that last chunk.

Miscellaneous: Updated instruction definition files and help for CRBasic dataloggers.

Various improvements have been incorporated into the communications engine, especially to support the new CR1000 datalogger.

Fixed a minor bug in the communications engine that prevented it from collecting tables from CR5000 or CR9032 dataloggers that contained boolean variables.

Used a different sequence for closing sockets and threads during shutdown by clients, including EZSetup and LogTool to make it more robust when used with certain third party antivirus software.

Made it possible to use regional settings with alternative separator characters (e.g., commas for decimal separators and periods for thousands separators), particularly noticeable in the Connect Screen's Numeric Monitor.

Improved the performance of the CRBasic Editor when using the keyboard cursor keys to scroll left-right or up-down. This was very noticeable on slow PCs (~350 MHz).

File Control: The properties button has been removed. A delete button has been added. The user can now pause and resume a program.