ALK7
Orderable7 Ah 12 V Alkaline Battery Pack (requires 8 D cell batteries)
Overview
The ALK7 is suitable for the following types of systems:
- Low-current-drain systems
- Systems that are visited periodically to replace batteries
- Low-current-drain systems that are installed temporarily
Note: The ALK7 does not ship with the required 8 D cell batteries. The batteries must be ordered separately or supplied by the user.
Specifications
- Battery Type
- Alkaline
- Batteries Needed
- 8 alkaline D cells
(not included)
- Weight
- 249.46 g
(0.55 lb)
Accessories
(1)
Other Accessories
(1)Replacement Parts
(6)31655
Screw #6-32 x .375 Flat Phillips 100 Degree Countersink SS
Screws may be ordered to replace those that may have been lost or damaged.
Orderable6044
Grommet for #6 or #8 Screw
These grommets are commonly used with screws to secure our equipment to the backplates of our enclosures.
Orderable5207
Velcro Strap, 1 in. x 18 in.
The 5207 holds the battery in its bracket. The 5207 may be purchased to replace a lost or damaged strap.
Orderable6028
Battery Holder with Wires for 8 D Cell Batteries
If you are ordering the 6028 as a replacement part for the ALK7, you will need six of the 15604 to make them work together. The six 15604 parts are attached in specific locations to properly allow the battery holder to fit inside the 31149 bracket.
Orderable15604
Black Hemisphere Foot
Six of the 15604 are used to help make the battery holder (6028) fit inside the 31149 bracket. If you are ordering the 6028 to replace part of the ALK7, you will need to order six of the 15604 to go with it.
Orderable31149
BP7 Shelf Battery Bracket or ALK7 Battery Bracket
The 31149 may be ordered to replace a lost or damaged bracket. The ALK7 will only work with 31149 units built after May 2016 and will not work with older units.
Orderable
