The 39086 can facilitate wiring when many wires need to be connected to one terminal. This kit contains one DIN rail mounting bracket, two 505 screws, two 6044 grommets, and two 15908 DIN Rail Stoppers. A complete configuration would also include terminal connectors, end plates, and jumpers. The stoppers, terminal connectors, and end plates are mounted onto the DIN rail bracket. The DIN rail bracket is mounted to an enclosure backplate using the kit’s screws and grommets.
|Hardware Type||DIN rail mounting kit|
|Why/When to Use||Allows multiple DIN rail mountable products to be secured to the enclosure backplate.|
|Mounting Bracket Length||15.2 cm (6.0 in.)|
|Mounting Space to Hold Parts||12.7 cm (5.0 in.) Can connect up to 33 items depending on width of items.|
|Dimensions||22.9 x 15.2 x 1.3 cm (9.0 x 6.0 x 0.5 in.)|
|Weight||68.0 g (0.15 lb)|
The 39086 can be used in any of our enclosures.
Number of FAQs related to 39086: 2
The 39086 6-inch DIN Rail Mounting Kit can be used when many wires need to be connected to one terminal. Another option is to use a wire nut to gang multiple wires together and to run one pigtail to one of the data logger universal terminals or control ports.
If a system has multiple CS650 or CS655 sensors, it will be necessary to connect many wires to a 12 V supply and many wires to ground. The DIN rail mounting kit is useful for attaching many wires to the same source in a clean and organized way. For more details, see the 39086 DIN Rail Terminal Kit instruction manual.
Other methods of connecting several wires together, such as terminal strips or wire nuts, would also work.