27481
OrderableDIN Rail Mountable 2-Wire 8.2 mm Grounded Screw Connector
Overview
The 27481 is a DIN rail mountable terminal connector that can be used between sensors (or other devices) and a data logger. The 27481 is a two-wire, 8.2-mm screw connector that is grounded to the DIN rail mounting bracket it is attached to.
Specifications
- Hardware Type
- Terminal block
- Why/When to Use
- For connecting power into the enclosure or large ground wires from branch circuit.
- Grounded
- Yes
- Number of Wires
- 2 (24 to 8 AWG)
- Connection Method
- Screw
- Maximum Ferrule Size
- 8 AWG
- Mounting Width
- 8.2 mm
- Dimensions
- 4.78 x 4.78 x 0.84 cm
(1.88 x 1.88 x 0.33 in.)
- Weight
- 22.68 g
(0.05 lb)
Common Accessories
(2)27483
End Cap and Separator for 27480 or 27481 DIN-Rail Connector
The 27483 is an end cap and separator for the 27481 terminal connectors.
Orderable29506
DIN-Rail Connector 72 Blank Label Inserts for 28374, 27480, 27481, or 33251
The 29506 is a strip of 72 blank label inserts for the 27481 terminal connectors. It is trimmable to a shorter length, if desirable. These label inserts can be written on using a Sharpie or similar pen.
Orderable
Similar Products
(8)15920
DIN Rail Mountable 3-Wire 4 mm Spring-Loaded Connector
Orderable28374
DIN Rail Mountable 2-Wire 5.2 mm Screw Connector
Orderable33251
DIN Rail Mountable 2-Wire 5.2 mm Grounded Screw Connector
Orderable21329
DIN Rail Mountable 6-Wire 5 mm Spring-Loaded 3-Tier Connector
Orderable21330
DIN Rail Mountable 6-Wire 5 mm Spring-Loaded 3-Tier Grounded Connector
Orderable27479
DIN Rail Mountable 6-Wire 5.2 mm Spring-Loaded 3-Tier Connector
Orderable27478
DIN Rail Mountable 6-Wire 5.2 mm Spring-Loaded 3-Tier Grounded Connector
Orderable27480
DIN Rail Mountable 2-Wire 8.2 mm Screw Connector
Orderable
