Product Details
Typically Ships Within 7 - 14 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) SC12 SC12 Cable
(1) 17648 USB Cable, Type A Male to Type B Male, 6 ft
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

15966
 
One charger or field cable is needed per base unit or when the radio is used on a datalogger's RS-232 port. The 15966 charger is typically used at the PC where ac power is available.
14291
 
One charger or field cable is needed per base unit or when the radio is used on a datalogger's RS-232 port. The 14291 power cable terminates in a barrel plug on one end and two pigtails on the other end.
 
The 28767 is a no-gain 1/4 wave helical antenna with an RPSMA connector designed for use with radios operating at 855 to 880 MHz. The 28767 has an omnidirectional radiation pattern and is fully weatherized for indoor and outdoor use.
21212
 
The 21212 is a 10-ft roll of black self-vulcanizing tape. This cold shrink tape can help protect non-whip antenna connections in RF, cellular, or satellite networks.
18663
 
This 1 ft, null modem cable has 9-pin connectors on both ends for connecting the datalogger's RS-232 port to a peripheral's RS-232 port. An interface such as the SC105 or SC932A is typically not required.
10873
 
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. It is used with DTE devices, such as a PC or NL201.

Replacement Parts

193
 
This spacer is needed if screws are used to secure the cable to the device.
SC12
 
The SC12 is our standard cable for connecting the datalogger's 9-pin serial I/O port to most peripherals with a 9-pin port. It is supplied with many of our standard communications peripherals. Its 9-pin male connector attaches to the datalogger's CS I/O port, and the two 9-pin female connectors can attach to peripherals or interfaces.
17648
 
The 17648 is a USB cable for attaching our products to a USB port on a PC. It has a type A male connector for connecting to the PC's USB port and a type B connector for connecting to the Campbell Scientific device.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.