Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CR6 connection with CDM A116 and VW305

dewan_001 Aug 27, 2016 04:21 AM

Hello everyone,

I would like to connect CDM A116 and VW 305 devices with CR6 using CPI communication system. 

Please help me with some online video tutorials or manual to connect it successfully, and the necessary programs to run them together. 

Highly appreciate your assistance. 

Respectfully,

Dewan

JDavis Aug 29, 2016 02:51 PM

I would suggest making a program in ShortCut for the measurements on the CDM-A116, then adding that program code to the examples for the CDM-VW305.

You will need to change the address on one of the CDM devices to avoid conflicts.

The physical connection between the CR6 and the CDM modules is super simple. There is a technical paper about connecting together a network of CPI bus devices.

https://s.campbellsci.com/documents/us/technical-papers/cpi-bus.pdf

Log in or register to post/reply in the forum.