Downloads

Upgrade LoggerNet version 2.1b to the latest 2.1c revision; no intermediate steps are required.

LoggerNet 2.1b must be installed on your machine. If moving from LoggerNet 2.0 to 2.1c you must install the 2.1 and 2.1b patches first.

Upgrade LoggerNet version 2.0 to 2.1; no intermediate steps are required.

LoggerNet 2.0 must be installed on your machine.

CR200(X), CR10(X), CR510, CR500, 21X, CR7 with Airlink Raven (CDMA Only)

Execution of this download installs the CR23X Operating System (Mixed-Array) on your computer.

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.

Execution of this download installs the CR10X Table Data Operating System on your computer.  

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.  Requires an SC32A or SC32B.

Execution of this download installs the CR23X Table Data Operating System on your computer.

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.

Execution of this download installs the CR510 PakBus Operating System on your computer.

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger. Requires an SC32A or SC32B.

Voice modem (COM310, COM300 and VS1) voice string editor used with the following dataloggers: CR10(X), CR510 and CR23X.

Upgrade Visual Weather version 2.0, 2.1 or 2.2 to 2.3.

This patch requires that version 2.0, 2.1 or 2.2 exists on the computer.

CRBasic errors can occur during programming.  This tutorial shows ten common errors and how to fix them.  Included errors: undeclared variable, variable out of bounds, illegal float destination variable, table not called, could not find DataTable, invalid or missing parameter, too many parameters, if without endif, unknown instruction, and DataInterval not divisible by scan.

Current TGA100A / 200 Operating System and TGA.CR9 program.  Requires the Device Configuration Utility to upload to the TGA system.

Note: This is for use with TGA Windows.

LoggerNet 4.0 was released in August of 2009. This tutorial demonstrates some of the new features and enhancements. Two new applications, ViewPro and the Network Planner, are introduced.

NOTE: Adobe Reader 9 or later is needed to view this tutorial.

Current version of the SC-USB firmware. The SC-USB utility is used to update the firmware in the SC-USB.

Current CC640 firmware.

Note: Device Configuration Utility 1.15 or newer is required for compatibility.

Tutorial to help you decide which of our software packages will best meet your needs.

Execution of this download installs the COM320 Operating System on your computer.  

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.  Requires a USB cable.

View Pro is included with LoggerNet 4 and RTDAQ. This tutorial introduces some of the new features including basic line graphs, changing graph properties, and graphing from two data sets. Examples include data from both table-based and mixed-array data sets.

Note: Adobe Reader 9 or later is needed to view this tutorial.

Execution of this download installs the CR10X Operating System (Mixed-Array) on your computer.  

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.  Requires an SC32A or SC32B.

Utility for the OBS-3A sensor.

This driver is for the SBT-USC6K USB to Serial cable (CSI Part# 17394). Support is for Windows 98/2000/ME/XP/Vista/7.  This driver is not compatible with the SC-USB Interface.

NOTE: Install the driver before plugging the cable into your computer.  Once the driver has been installed, plug the cable into the computer to finish the installation.

Special operating system that supports serial sensors, SDI-12 sensors, and sending data to another PakBus device.  Also included is the Compiler and CRBasic Editor support files for the CR2xx dataloggers.

Use of this file will update the datalogger support files for the CRBasic Editor included in LoggerNet and PC400.

Includes: SerialInput, SendData, SDI12Sensor, WindVector
Excludes: GOES Instructions, ETo, MODBUS Instructions, LoggerIdentify

Default operating system for the CR295 that supports transmission of data via GOES satellite.   Also included is the Compiler and CRBasic Editor support files for the CR295 datalogger.

Use of this file will update the datalogger support files for the CRBasic Editor included in LoggerNet and PC400.

Includes: WindVector, GOES Instructions
Excludes: Internal Radio Support, SerialInput, SDI12Sensor, ETo, MODBUS Instructions, SendData, & LoggerIdentify

This patch is for use ONLY if you have LoggerNet 4.0 or RTMC Pro 3.0 or newer.  It will upgrade all versions of RTMC Web Server between 1.6 and 3.1 to 3.2.

NOTE: RTMC 1.x projects must be imported into RTMC Developer 2.0 or greater, inspected and resaved before they will run.

Note: This application requires the Microsoft .Net 3.5 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

Upgrades LNDB 1.0 to 1.1.

Note: This application requires the Microsoft .Net 3.5 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

A fully functional 30 day trial version of our RTMC Web Server Software.

Note: This application requires the Microsoft .Net 3.5 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

Windows USB driver for the CWB100.  Supported operating systems are Windows XP, Windows Vista and Windows 7.

Note: Driver must be installed before connecting the CWB100 to your computer.

A205 USB Drivers for the Windows operating system.

NOTE: Drivers should be loaded before plugging the A205 into the computer.

Example CR1000 datalogger programs to measure a RMY81000 configured as a RMY81005 or RMY81005A. Along with the programs are the RMY81000 configuration files. The RMY8100 must be running firmware version 7.0.05 or greater. This firmware supports a checksum that is sent with the serial data. Contact RM Young Company to update the firmware.

This patch upgrades LoggerNetData version 4.0 to 4.1.  A version of LoggerNetData 4.x must be installed on the computer. 

Note: This application requires the Microsoft .Net 3.5 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

Our starter software that supports direct connection between a datalogger and a computer. Short Cut, Device Configuration Utility and CardConvert are included.

Upgrade PC400 version 4.0 to 4.1; no intermediate steps are required.

PC400 4.0 must be installed on your computer.

This patch upgrades LoggerNet SDK 4.0 to version 4.1.

The Wireless Sensor Planner is a tool for use with Campbell Scientific wireless sensors.  It assists in designing and configuring wireless sensor networks.

A fully functional 30 day trial version of VisualWeather. 

VisualWeather is for those who want reliable, real-time weather data and printed reports without worrying about technical details.

Click Download Now to go to Campbell Scientific's YouTube Channel. There you will find videos on the following topics:

• Wireless Sensor Networks
• A Comparison of Campbell Scientific's Dataloggers
• The CR1000 Wiring Panel
• How to Wire a CR1000 Datalogger to a Multiplexer
• Multiplexer Programming with a CR1000 Datalogger
• Writing A Program with Shortcut for Campbell Scientific Dataloggers
• PC200W Software and Campbell Scientific Datalogger

Current firmware for the SDM-SIO1.

Note: If your version of DevConfig does not support the download of *.hex files, you will need to type in the file name directly or display it by typing *.hex and selecting the file name from the filtered list.

A fully functional 30 day Trial Version of RTDAQ - Real Time datalogger support software for High Speed dataloggers (CR9000X, CR5000, CR3000, CR1000 and CR800/CR850).

Note: This application requires the Microsoft .Net 3.5 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

Current version of the SC115 firmware.  Requires the Device Configuration Utility to upload the firmware to the SC115.

Note: Execute this file before connecting the SC115 to your computers USB port.  USB drivers are also included and must be installed on the computer. 

Execution of this download installs the COM220 Operating System on your computer.

Note: The Device Configuration Utility is used to upload the included operating system to the COM220.

Windows USB drivers for the NL200.  Supported operating systems are Windows XP, Windows Vista and Windows 7.

Note: Drivers must be installed before connecting the NL200 to your computer.

A fully functional 30 day trial version of RTMC Pro (Real Time Monitoring & Control) software for creating custom data displays. RTMC Pro is an enhanced version of RTMC that contains more graphical components, more alarms including email alarm events, run/open, hotspot and snapshot capabilities.  The CSI Web Server is also included.

Note: This application requires the Microsoft .Net 3.5 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

Execution of this download installs the CR1000 Operating System and Compiler on your computer.  It also updates the CR1000 support files for the CRBasic Editor.  

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.

Execution of this download installs the CR3000 Operating System and Compiler on your computer.  It also updates the CR3000 support files for the CRBasic Editor.  

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.

Current Operating System, Compiler and CR5000 support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet or RTDAQ to upload.

Use of this file will update the datalogger support files for the CRBasic Editor included in LoggerNet and RTDAQ.

Designed to complement the PWS100 the Present Weather Viewer provides a simple yet comprehensive interface showcasing many of the capabilities of the PWS100 whilst providing easy configuration of key sensor features.