25482 CR1000KD Keyboard/Display for OEMs

Overview

This version of the CR1000KD is for OEMs. The OEM can purchase this product without a label or with an AgTerra label (see Ordering Info).

Read More

Images

Detailed Description

This version of the CR1000KD is for OEMs. The OEM can purchase this product without a label or with a AgTerra label (see Ordering Info).

The CR1000KD is a portable keyboard display for our CR800 and CR1000 dataloggers. It allows you to check the datalogger's status, display or plot sensor readings and stored values, and to enter numeric data or change port/flag state. One CR1000KD may be carried from station to station in a datalogger network.

The CR1000KD displays 8 lines x 21 characters (64 x 128 pixels) and has a 16-character keyboard. The CR1000KD is powered by the datalogger’s power supply. An SC12 connects the CR1000KD to the CR1000WP or CR800; the two connectors on the SC12 allow connection of additional peripherals.

The CR1000KD supports custom menus. With custom menus, you can set up choices within the datalogger program that are initiated by a simple "toggle" or "pick from a list" in the menu displayed on the CR1000KD (for example, "Initiate Sensor Calibration Sequence" vs. "Bypass Sensor Calibration Sequence.")

There is not a CR1000KD Operator's Manual; use of the CR1000KD is described in the CR800 and CR1000 datalogger manual.

 

Specifications

Current Drain

Quiescent Negligible
Active
  • 7 mA (without backlight)
  • 100 mA (with backlight)

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Dataloggers

Product Compatible Note
CR1000
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR295X (retired)
CR3000 The CR3000's integrated keyboard display is preferable for most situations. A special datalogger OS is required to use the CR3000; contact Campbell Scientific for more information.
CR5000 (retired)
CR800
CR850
CR9000X