ENC8/10
 
ENC8/10 Weather-Resistant 8 x 10 inch Enclosure
 
Enclosure Hole Options
-SC -SC 1 Conduit for Cables
-ES -ES 6 Entry Seals for Cab
-NC -NC No Conduit/Entry Seal
Enclosure Mounts
-NM -NM No Enclosure Mounting
-MM -MM Enclosure Mounting

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 32477 Enclosure Supply Kit, Small Size

Common Accessories

32464
 
The 32464 accommodates one package of the 4905 4-unit desiccant bags. This holder has adhesive Velcro strips (supplied) that the customer uses to mount it to the inside lid of a Campbell Scientific enclosure.
CS210
 
The CS210 enclosure humidity sensor measures relative humidity levels inside environmental enclosures. The sensor is housed inside the enclosure.
31312
 
Commonly used with RF407-series or RF451 radio devices, the 31312 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna or antenna coaxial cable with a Type N connector. The 31312 is used with many 900 MHz products.
31315
 
Commonly used with cellular devices, the 31315 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. The 31315 is used with RF450s, cellular phones, or the COM9522B.
18132
 
The 18132 is a CD295 display factory-installed in the lid of your enclosure. When you purchase an enclosure and the 18132, Campbell Scientific will install the CD295 in the enclosure lid before the enclosure leaves the factory. The price includes the CD295 DataView II display.
27814
 
When you purchase the 27814, you are ordering the CD100 mountable display with keypad, factory-installed in an enclosure lid. The 27814 must be ordered at the same time as the ENC8/10. When you purchase an enclosure and the 27814, Campbell Scientific will install the CD100 in the enclosure lid before the enclosure leaves the factory. The price includes the CD100.
18166
 
The 18166 is a factory-installed version of the 18165 Enclosure Door-Open Indicator Kit. When you purchase the ENC8/10 and the 18166, Campbell Scientific will install the 18165 in the enclosure before the enclosure leaves the factory. The price includes the 18165 kit.
32788
 
When you purchase the 32788, you are ordering a 5 W solar panel factory-installed in the lid of an ENC8/10 enclosure. The 32788 must be ordered at the same time as the ENC8/10. When you purchase the ENC8/10 and the 32788, Campbell Scientific will install the 32788 in the enclosure lid before the enclosure leaves the factory.

Other Accessories

18165
 
The 18165 Enclosure Door-Open Indicator Kit has a sensor that sends a signal when the door of the enclosure is open. It has two main pieces: one is located on the case side, the other on the lid side of the enclosure. The magnetic sensor inside the 18165 is monitored with a control port on the datalogger.
 
The 19334 is a factory-installed 17 in. (43.2 cm) cable with an SMA connector on the inside of an enclosure and a Type N connector on the outside for attachment of an antenna. It is intended for enclosures that will house our RF450 radio, a RavenXT-series cellular modem, or a user-supplied Freewave radio.
19335
 
The 19335 is a factory-installed bulkhead-mounted coaxial cable. The associated enclosure on your order is properly cut to fit the Type N bulkhead connector, and the cable is installed prior to shipment. The cable has a Type N Female bulkhead connector on one end and an RPSMA plug (male) connector on the other. The cable is 17 in. (43.2 cm) of low-loss LMR-195. This cable assembly is generally used with an RF401-series radio, CR206X datalogger, AVW206 spectrum analyzer, or NL240 Wi-Fi interface inside the enclosure and a Type N Male-terminated radio-antenna cable outside the enclosure.

Replacement Parts

28878
 
The 28878 is a replacement humidity indicator card. It provides a visual reference of humidity level inside the enclosure. Colored circles change color from blue to pink to indicate levels of 30%, 40%, and 50% relative humidity. Double sticky tape on the back of the card allows it to be easily secured to an enclosure lid.
 
The 32415 Universal Backplate is available as a replacement part for ENC8/10 enclosures. The white powder-coated backplate is completely prepunched with a matrix of holes.
4905
 
The 4905 Single 4-Unit Silica Desiccant Bag is packaged in Tyvek. It is used to desiccate the enclosure. The supplied desiccant should fill the initial needs of most applications, but should be periodically replaced.
 
The 32477 includes desiccant packs, humidity indicator card, cable ties, putty, screws, grommets, PVC plug, and a Phillips-head screwdriver.
 
The 8267 screw is used to attach a backplate to the inside of the ENC8/10 enclosure. This flat screw allows for the maximum amount of space on the backplate to be used for mounting.
5449
 
The 5449 may be purchased to replace the ground lug attached to the enclosure. This enclosure ground lug is required to properly ground the enclosure.
23
 
This stainless-steel nut may be purchased to replace a lost or damaged nut.
 
The 25746 and 25744 are the two parts used to create the standard conduit for Campbell Scientific enclosures. If a portion of the conduit for an ENC or PWENC enclosure becomes lost, the 25746 and 25744 can be ordered as replacements.
 
The 25744 and 25746 are the two parts used to create the standard conduit for Campbell Scientific enclosures. If a portion of the conduit for an ENC or PWENC enclosure becomes lost, the 25744 and 25746 can be ordered as replacements.
 
The 31363 is the cable entry seal used on the ENC8/10-ES option. If a part becomes lost, the 31363 can be ordered as a replacement.
 
The 6688 is the plug that fits inside the 31363 Cable Entry Seal when there is not a cable running through it. The 6688 can be ordered to replace a lost plug.
 
The 25745 is used to reduce the size of the conduit opening when only a couple of wires are threaded through. With the reducer, there is a smaller opening that needs to be filled with putty to seal.
 
The 32430 can be ordered to replace damaged mounting kit parts.
 
This 14 gauge ground wire connects the enclosure ground lug to the datalogger.