CMP3-L
 
CMP3-L Kipp & Zonen Pyranometer w/Sun Shield
 
CMP3-L Options - show details
-L ft cable per sensor

Allowed values: 0-328 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS -CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.

Add to your Quote List


Product Details
Restockable Yes
Warranty 2 years
Compliance CE Compliance Image
Ships With
(1) Sun Shield from original mfg
(1) Bolts for mounting from original mfg
(4) Nuts for mounting from original mfg
(1) Lens Cloth from original mfg
(1) WRR Traceable Calibration Certificate

Common Accessories

CM225
 
The CM225 attaches the CMP3-L to a crossarm, mast, or pole (1.0" to 2.1" OD).

Other Accessories

CM255LS
 
The CM255LS is an adjustable angle, adjustable plane mounting stand.
CM255
 
The CM255 is used for mounting the CMP3-L at an angle.
27065
 
This mounting stand includes slots that can be adjusted to any angle from horizontal to vertical. It is typically used to attach a CMP3, CMP6, CMP11, CMP21, or LP02 pyranometer to a horizontal crossarm or vertical mast (1 to 2.1 in. outer diameter).
CM256
 
CM256 Adjustable Plane & Angle Solar Mounting Stand
 
To use the CM256, the -SP option is needed.

The CM256 adjustable-angle, adjustable-plane mounting stand further simplifies the accurate and precise mounting of a pyranometer, ventilation unit, shadowband radiometer, or reference cell. Several pyranometer mounting stands have been combined and simplified to make ordering easier and usability friendlier. The CM256 is a combination of the CM255LS pyranometer mount, CM245 reference cell and shadowband mount, 31394 VU01 mount, and 31153 CVF4 mount. In addition, several new sensors are now fully supported such as the SPN1, MS-80(M), SR30, SR05, and IMT reference cell CM325.
Mounting Plate Options - show details
-SP -SP w/Small Mount Plate
This mounting plate option is compatible with the following: MS-40/60/80, MS-40M/60M/80M, SR30, SR05, SR11, SR15, SR20-T2, SR20-D2, SP Lite 2, CMP3/6/10/11/21/22, SMP3/6/10/11/21/22, CGR3/4, and SGR3/4.
-LP -LP w/Large Mount Plate
This mounting plate option is compatible with the following: SPN1, PSP, GPP, SPP, and Si-01TC Reference Cell (CS325DM).
-VN -VN w/VU01 or MV-01 Plate
This mounting plate option is compatible with the following: VU01 and MV-01.
-CV -CV w/CVF4 Plate
This mounting plate option is compatible with the following: CVF4.
CM261
 
CM261 Single-Axis Tracker Mounting Stand
 
The CM261 single-axis tracker pyranometer mount with adjustable plane simplifies the mounting of any pyranometer, ventilation unit, reference cell, or SPN1 to hexagonal, round, and square single-axis torque tubes. The CM261 is a combination and simplification of the CM260 and CM265 to make ordering easier and usability friendlier. The bracket includes provisions for mounting the sensors and ventilation units at different heights, allowing the sensing element to be mounted at the same height as the solar modules.
Mounting Plate Options - show details
-SP -SP w/Small Mount Plate
This mounting plate option is compatible with the following: MS-40/60/80, MS-40M/60M/80M, SR30, SR05, SR11, SR15, SR20-T2, SR20-D2, SP Lite 2, CMP3/6/10/11/21/22, SMP3/6/10/11/21/22, CGR3/4, and SGR3/4.
-LP -LP w/Large Mount Plate
This mounting plate option is compatible with the following: SPN1, PSP, GPP, SPP, and Si-01TC Reference Cell (CS325DM).
-VN -VN w/VU01 or MV-01 Plate
This mounting plate option is compatible with the following: VU01 and MV-01.
-CV -CV w/CVF4 Plate
This mounting plate option is compatible with the following: CVF4.
Torque Tube Mounting - show details
-AT -AT for ATI Torque Tube
This torque tube mounting option is compatible with hexagonal torque tubes such as ATI.
-NT -NT for NexTracker T Tube
This torque tube mounting option is compatible with round torque tubes such as NexTracker.
-GT -GT for Generic T Tube
This torque tube mounting option is compatible with square torque tubes.

Replacement Parts

 
CMP3CBL-L CMP3 Replacement Cable
 
This cable is included with the CMP3-L for connecting the sensor to a datalogger. The CMP3CBL may be purchased to replace a lost or damaged cable. It may also be purchased if you want a different cable termination option.
CMP3CBL-L Options - show details
-L ft cable per sensor

Allowed values: 1-328 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS -CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.

Services

33476
 
The 33476 recalibration service is performed using a reference group of pyranometers traceable to World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM E824 standard.
33477
 
The 33477 recalibration service is performed indoors using a reference pyranometer of the same make and model. Reference pyranometers are traceable to the World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM G207 standard.