OEM Products / 33205
33205
 
33205 CR6 Datalogger for OEMs (-40 to +70C)
 
Communication Options - show details
-NA -NA No Additional Coms
Comes with the standard communication methods only (CS I/O, USB, CPI, RS-232, Ethernet, etc.).
-RF407 -RF407 w/900MHz Radio
Offers built-in spread-spectrum radio; ideal for medium-range wireless communication. Designed primarily for operation in the North America. Requires additional antenna.
OEM Label Options - show details
-NL -NL No OEM Label
With this option, the datalogger is shipped without a label allowing the OEM to use their own label.
-X1 -X1 Compnay X NA Label
With this option, the datalogger will include a company label instead of the Campbell Scientific label.

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 3 years
Compliance CE Compliance Image RoHS Compliance Image

Note: The following 33205 options are RoHS but not CE compliant: -RF407.

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Additional Common Accessories can be found on the RF407 Ordering Info page.

Common Accessories

505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures. Four screws are needed per datalogger.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures. Four grommets are needed per datalogger.
27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
1113
 
The 1113 is used to attach sensor leads to screw terminals.
8125
 
The 8125 is a small, flat-bladed screwdriver that is extremely useful for opening the guillotine terminals on the datalogger.
3315
 
This type T, 5 in. thermocouple is attached to a differential channel on the 33205 datalogger wiring panels when the datalogger is shipped.

Replacement Parts

28640
 
The 28640 universal terminal connector is shipped attached to our CR6-series dataloggers. This lockable connector provides screw terminals for connecting digital or analog sensor or control wires to the datalogger.
25600
 
The 25600 control terminal connector is shipped attached to our CR6-series dataloggers. This lockable connector provides screw terminals for connecting digital sensor, general I/O, and control wires to the datalogger.
27651
 
The 27651 power connector is shipped attached to our CR6-series dataloggers. This green, removable connector provides screw terminals for connecting the wires of a 12 V battery and/or a 16 to 32 Vdc charging source, such as a power converter or solar panel, to the datalogger.
30028
 
The 30028 fits inside a CR6-series datalogger. This lithium battery powers the clock and SRAM when external battery power, a charging source, or a USB power source is not connected. The 30028 is a 3.6 Vdc, 2.4 Ah, AA size cell. The 30028 needs to be periodically replaced.
29350
 
The 29350 is shipped inserted into the micro USB port of our CR6-series dataloggers. This micro USB plug is not critical for datalogger operation, but it can help prevent dust or insects from getting into the USB port.
30266
 
The 30266 is shipped as a cap for the microSD card slot of our CR6-series dataloggers. This microSD dust cover is not critical for datalogger operation, but it can help prevent dust or insects from getting into the microSD card slot.
30265
 
The 30265 is shipped as a cap for the CS I/O port of our CR6-series dataloggers. This dust cap is not critical for datalogger operation, but it can help prevent dust or insects from getting into the CS I/O port.
29505
 
The 29505 covers the lithium battery in the datalogger.
905
 
The 905 is used to desiccate small subassemblies.
10645
 
The 10645 is the screw used in the ground lug.
61
 
Five 61 screws hold the top and bottom of the datalogger casing together.
15558
 
Two 15558 screws hold the lithium battery cover in place on the datalogger.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.