Overview
The COAXSMA-L is an LMR195 coaxial cable fitted with a Type N Male connector on one end and an SMA connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a cellular or spread-spectrum radio with an SMA connector.
Read MoreImages
Detailed Description
The COAXSMA-L is an LMR195 coaxial cable fitted with a Type N male connector on one end and an SMA connector on the other end. The cable has a UV-resistant polyethylene jacket, which with proper installation and care, is designed for 20 years of outdoor use.
Specifications
- Cable Type: LMR195
- Connector 1: Type N male plug
- Connector 2: SMA male plug
- Bend Radius: 1.27 cm (0.5 in.)
- Weight: 0.021 lb/ft
- Operating Temperature Range: -40° to +85°C
- Impedance: 50 ohm
- Attenuation db/100m (db/100ft) @ Frequency:
- 14.6 (4.4) @ 150 MHz
- 25.5 (7.8) @ 450 MHz
- 36.5 (11.1) @ 900 MHz
- 62.4 (19.0) @ 2.4 GHz
Compatibility
The COAXSMA-L is compatible with any device requiring a Type N to SMA cable with an impedance of 50 ohm. The COAXSMA-L is often used with Campbell Scientific cellular modems and the RF450 spread-spectrum radio.
Documents
Compliance
Listed Under
- 20679 - 800 MHz/0 dBd and 1.9 GHz/3 dBd Omnidirectional Cell Antenna with Mounting Hardware
- 31128 - 8 dBd Yagi Wideband Antenna with Mounting Hardware
- 32262 - 2 dBd 4G/3G Multiband Omnidirectional Antenna with Mounting Hardware
- CELL220 - 4G LTE CAT1 Cellular Module for Australia
- CELL225 - 4G LTE CAT1 Cellular Module for Japan
- CELL205 - 4G LTE CAT1 Cellular Module for AT&T
- CELL210 - 4G LTE CAT1 Cellular Module for Verizon
- CELL215 - 4G LTE CAT1 Cellular Module for EMEA Countries
- RV50 - Industrial 4G LTE Cellular Gateway
- CR300 - Datalogger
- CR310 - Datalogger with Ethernet
Privacy Policy Update
We've updated our privacy policy. Learn More