The VDIV2:1 divides the sensor's signal voltage by a factor of 2. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. Both resistors are ±0.02% 10 kOhms.
Features
- Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
- Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction
Specifications
- Division ratio: 2:1
- Resistors: 10 kOhm and 10 kOhm
- Ratio tolerance (@ 25°C): ±0.02%
- Power rating per element: 0.1 Watts
