VDIV10.1

10:1 Voltage Divider

The VDIV10:1 divides the sensor's signal voltage by a factor of 10. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. The resistors are ±0.02% 10 and 90 kohm.

Features

  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction

Specifications

  • Division ratio: 10:1
  • Resistors: 10 kohm and 90 kohm
  • Ratio tolerance (@ 25°C): ±0.02%
  • Power rating per element: 0.1 Watt