Tripod and Tower Mounts

Crossarms and mounting brackets

CM202 2-foot Crossarm with Bracket

2-foot Crossarm with Bracket
  • Compatible with our CM6 Tripod, CM10 Tripod, CM110 Tripod, CM115 Tripod, CM120 Tripod, UT10 Tower, UT20 Tower, or UT30 Tower
  • Secures to tripod or tower with u-bolts
  • Uses CM210 Bracket Kit to attach to a 3/4-inch or 1.0-inch pipe
more »

CM204 4-foot Crossarm with Bracket

4-foot Crossarm with Bracket
  • 4-foot crossarm for sensor attachment
  • Attaches to tripod mast or pole
  • Includes one CM210
more »

CM206 6-foot Crossarm with Bracket

6-foot Crossarm with Bracket
  • 6-foot crossarm for sensor attachment
  • Attaches to tripod mast or pole
  • Includes one CM210
more »

CM210 Crossarm-to-Pole Bracket

Crossarm-to-Pole Bracket
  • Attaches a crossarm to an instrumentation tripod or tower
  • Accommodates crossarms of varying sizes
  • One included with each CM202, CM204, or CM206 crossarm
more »

CM215 Apex Sensor Mount

Apex Sensor Mount
  • Mounts wind sensor on top of CM110, CM115, or CM120 Aluminum Tripod
  • Does not requires a crossarm
  • Lightning rod can be attached to some sensors; contact CSI for details
more »

CM220 Right Angle Mounting Bracket

Right Angle Mounting Bracket
  • Right angle mounting bracket
  • Vertically mounts a sensor to a crossarm
more »

CM225 Solar Sensor Mounting Stand

Solar Sensor Mounting Stand
  • Solar sensor mounting stand
  • Leveling base or leveling fixture required
  • Can be mounted vertically or horizontally
more »

019ALU Aluminum Crossarm Sensor Mount

Aluminum Crossarm Sensor Mount
  • Mounts directly to the top of a tripod or tower
  • Includes a Nu-rail connector on each end:
    • One end is 3/4" x 3/4" for mounting one:
      • 025STAND Pyranometer Crossarm Stand
      • 03001 Wind Sentry Wind Set
      more »

UT018 Tower Mounting Bracket with 2 ft Crossarm

Tower Mounting Bracket with 2 ft Crossarm
  • Provides a 2 foot length
  • Uses bracket and U-bolts to attach to one leg of a tower
  • Allows mounting of one sensor
more »

UT018-5 Tower Mounting Bracket with 5 ft Crossarm

Tower Mounting Bracket with 5 ft Crossarm
  • Provides a 5 foot length
  • Uses bracket and U-bolts to attach to one leg of UT20 or UT30 tower
  • Allows mounting of 2 sensors at same height but on opposite sides of tower
more »



About Tripod and Tower Mounts

Crossarms provide a rugged attachment point for securing meteorological sensors, antennas, and other peripherals to our tripods and towers. The design of all the crossarms places the sensor at a few feet away from the midline of the tower or tripod thereby serving to reduce the effects of the mount on the sensor measurement.

The CM202, CM204, and CM206 crossarms are the most versatile and can be used with our light-weight tripods (CM110, CM115, or CM120), our galvanized-steel tripods (CM6, CM10), or towers (UT10, UT20, UT30).

The the UT018 and UT018-5 crossarms are designed to attach to an intermediate point on our towers.