Terminal Input Modules

Completion resistors that integrate with your wiring panel

CURS100 Current Shunt Module

Current Shunt Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 4-20 mA and other current output transducers simple; gauges are measured with a voltage measurement instruction
more »

VDIV10.1 10:1 Voltage Divider

10:1 Voltage Divider
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction
more »

VDIV2.1 2:1 Voltage Divider

2:1 Voltage Divider
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction
more »

4WFB120 120 Ohm 4-Wire Full Bridge Module

120 Ohm 4-Wire Full Bridge Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 120 Ohm strain gauges simple; gauges are measured with a Full Bridge measurement instruction
more »

4WFB350 350 Ohm 4-Wire Full Bridge Module

350 Ohm 4-Wire Full Bridge Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 350 Ohm strain gauges simple; gauges are measured with a Full Bridge measurement instruction
more »

4WFB1K 1 kOhm 4-Wire Full Bridge Module

1 kOhm 4-Wire Full Bridge Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 1 kOhm strain gauges simple; gauges are measured with a Full Bridge measurement instruction
more »

4WPB100 100 Ohm 4-Wire PRT Bridge Module

100 Ohm 4-Wire PRT Bridge Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 100 Ohm PRTs simple; gauges are measured with a 4-Wire Half-Bridge measurement instruction
more »

4WPB1K 4-Wire 1 kOhm PRT Bridge Module

4-Wire 1 kOhm PRT Bridge Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 1000 Ohm PRTs simple; gauges are measured with a 4-Wire Half-Bridge measurement instruction
more »

4WHB10K 4-Wire Half-Bridge Module

4-Wire Half-Bridge Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 10 kOhm, 4-wire half-bridges simple; gauges are measured with a 4-Wire Half Bridge instruction
more »

3WHB10K 3-Wire Half-Bridge Module

3-Wire Half-Bridge Module
  • Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
  • Makes accurate measurement of 3-wire Half Bridges simple, typically used with 100 and 1000 Ohm PRTs.
more »



About Terminal Input Modules

These simple modules are small peripherals that provide completion resistors for resistive bridge measurements, voltage dividers, and precision current shunts. The modules attach directly to the datalogger's input terminals. Each input module provides circuitry to connect one sensor, except for the voltage dividers which can connect up to two single-ended sensors.