TB4-L

Ordering Information

Measurement and Control Products for WEATHER

Measurement and Control Products for WATER

Measurement and Control Products for ENERGY

Measurement and Control Products for MACHINES

Measurement and Control Products for STRUCTURES

Measurement and Control Products for EARTH

Request a Quote

Ask a Question

Overview

Specifications

Compatibility

Ordering

Support

Image Gallery

Sections: Common Accessories, Services

TB4-L Pricing Details
Educational Discounts: Yes Quantity Discounts: Yes Restockable: Yes Warranty: 1 year

Model	Description
TB4-L	Hydrological Services Rain Gage 0.01 inch (0.254mm) Tip w/8 inch Orifice
TB4-L Options (hide details)
-L	ft cable per sensor
Recommended length is 25, 50, 75, or 100 ft (8, 15, 23, or 31 m).
Cable Termination Options (hide details)
-PT	-PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW	-PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS	-CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.

detail preferences (hide details)

Common Accessories (hide details)
CM240	Leveling Base & Mount for CS700, TB4, or 385
The CM240 base helps level the TB4 ensuring more accurate measurements. The base attaches to a CM300-series mounting pole or to a user-supplied 1.5 IPS (1.9" OD) pipe. The pipe should be long enough to place the gage's orifice one meter above the ground.
260-953	Novalynx Alter-type Rain Gage Wind Screen, 36 inch legs
This wind screen consists of 32 leaves that hang freely and swing as the wind moves past them. The 260-953 helps minimize the affect of wind on the rain measurements.
CM300	23 inch Mounting Pole w/Cap
The CM300 provides a 23-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
Pedestal Options (hide details)
-NP	-NP No Pedestal Base
The CM300 provides a 23-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PJ	-PJ Pedestal J-Bolt Kit
The CM300 provides a 23-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PS	-PS Pedestal Short Legs
The CM300 provides a 23-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PL	-PL Pedestal Long Legs
The CM300 provides a 23-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
CM305	47 inch Mounting Pole w/Cap
The CM305 provides a 47-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
Pedestal Options (hide details)
-NP	-NP No Pedestal Base
The CM305 provides a 47-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PJ	-PJ Pedestal J-Bolt Kit
The CM305 provides a 47-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PS	-PS Pedestal Short Legs
The CM305 provides a 47-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PL	-PL Pedestal Long Legs
The CM305 provides a 47-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
CM310	56 inch Mounting Pole w/Cap
The CM310 provides a 56-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
Pedestal Options (hide details)
-NP	-NP No Pedestal Base
The CM310 provides a 56-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PJ	-PJ Pedestal J-Bolt Kit
The CM310 provides a 56-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PS	-PS Pedestal Short Legs
The CM310 provides a 56-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
-PL	-PL Pedestal Long Legs
The CM310 provides a 56-in. long pole for mounting the CM240 Leveling Base (see above). This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.

Services (hide details)
16564	TB4 or CS700 Recalibration w/ Documentation
The 16564 is offered for customers wanting factory calibration. When factory calibration is ordered, Campbell Scientific will calibrate the rain gage using a procedure similar to that described in the manual (summing the recorded tips expected given a known volume of liquid passing through the gage then adjusting the calibration based on the result). The 16564 requires an RMA (Returned Material Authorization).