Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
Samples CANbus Data Directly
Uses latest CAN controller
Request a Quote
Ask a Question
Overview
 
Specifications
 
Compatibility
 
Ordering
 
Support
 
Image Gallery
Sections: Common Accessories, Replacement Parts
SDM-CAN Pricing Details
Educational Discounts: Yes    Quantity Discounts: Yes    Restockable: Yes    Warranty: 1 year   
Model Description
SDM-CAN CSL CANbus Interface Module, 24V Tested from -40 to +80C
detail preferences (hide details)
Common Accessories
(hide details)
13958 SDM-CAN Mounting Kit for CR9000(X) Slot
The 13958 consists of two brackets and four screws. This mounting kit allows the SDM-CAN to be fastened to a slot in a CR9000(X)'s chassis. The bracket that comes attached to SDM-CAN must be removed prior to mounting the SDM-CAN to the 13958's metal brackets. An SDM-CAN, fitted with the 13958, occupies one slot in the CR9000(X) chassis.
CABLE5CBL-L 5-Conductor 22AWG Cable w/Drain
This cable connects the SDM-CAN to the datalogger. The CABLE5CBL-L is a 24-AWG, five conductor cable with a Santoprene® jacket and an aluminum mylar shield. A 1-ft cable length should be sufficient when both datalogger and SDM-CAN are housed within an ENC12/14 enclosure; a 2-ft length may be required if the datalogger and SDM-CAN are housed at opposite ends of an ENC16/18 enclosure.

CRBasic dataloggers should use the SDMSpeed instruction if the cable length is longer than 20 ft. The maximum recommended length for the CR7 is 600 ft. For other Edlog dataloggers, the maximum recommended cable length is 20 ft.
CABLE5CBL-L Options (hide details)
-L ft per cable
This cable connects the SDM-CAN to the datalogger. The CABLE5CBL-L is a 24-AWG, five conductor cable with a Santoprene® jacket and an aluminum mylar shield. A 1-ft cable length should be sufficient when both datalogger and SDM-CAN are housed within an ENC12/14 enclosure; a 2-ft length may be required if the datalogger and SDM-CAN are housed at opposite ends of an ENC16/18 enclosure.

CRBasic dataloggers should use the SDMSpeed instruction if the cable length is longer than 20 ft. The maximum recommended length for the CR7 is 600 ft. For other Edlog dataloggers, the maximum recommended cable length is 20 ft.
Cable Termination Options (hide details)
-PT -PT w/Tinned Wires
This cable connects the SDM-CAN to the datalogger. The CABLE5CBL-L is a 24-AWG, five conductor cable with a Santoprene® jacket and an aluminum mylar shield. A 1-ft cable length should be sufficient when both datalogger and SDM-CAN are housed within an ENC12/14 enclosure; a 2-ft length may be required if the datalogger and SDM-CAN are housed at opposite ends of an ENC16/18 enclosure.

CRBasic dataloggers should use the SDMSpeed instruction if the cable length is longer than 20 ft. The maximum recommended length for the CR7 is 600 ft. For other Edlog dataloggers, the maximum recommended cable length is 20 ft.
-PW -PW w/Pre-Wire Connector
This cable connects the SDM-CAN to the datalogger. The CABLE5CBL-L is a 24-AWG, five conductor cable with a Santoprene® jacket and an aluminum mylar shield. A 1-ft cable length should be sufficient when both datalogger and SDM-CAN are housed within an ENC12/14 enclosure; a 2-ft length may be required if the datalogger and SDM-CAN are housed at opposite ends of an ENC16/18 enclosure.

CRBasic dataloggers should use the SDMSpeed instruction if the cable length is longer than 20 ft. The maximum recommended length for the CR7 is 600 ft. For other Edlog dataloggers, the maximum recommended cable length is 20 ft.
Replacement Parts
(hide details)
13657 Null Modem Cable 9-Pin Female to Female, 6ft
The 13657 is a 6-foot cable that terminates in DB9 female connectors on both ends. It's used to connect the SDM-CAN's RS-232 port with a PC. A PC running terminal emulator software can provide SDM-CAN status, troubleshooting, and network monitoring.
6616 3-Pin Screw Terminal Plug Connector .2 inch pitch Straight Wire Entry 12-24 AWG Green
The 6616 can be used to connect the SDM-CAN with the CANbus network. The CAN Hi, Lo, and ground wires attach to this 3-terminal removable connector.

Resources and Links

Ships With

(2) 505 Screws

(2) 6044 Grommets

Shipping Weights & Dims

Single Box Shipping Weight:
     3.0 lbs
     1.4 kg

Single Box Shipping Dimensions:
     12" x 12" x 4"
     30.5 x 30.5 x 10.3 cm