RAVEN110
Ordering Information
This product is no longer available and has been replaced by: RAVENXTG. Some accessories, replacement parts, or services may still be available.
Sections:
Other Accessories
This product is currently unavailable for orders.
| Other Accessories | ||||
| 10530 | 800MHz Cellular 9dBd YAGI Antenna w/Type N Female & Mounting Hardware | |||
|
A choice of four antennas is offered for the Raven110. The 10530 is a Yagi antenna intended for sites near the edge of the cellular coverage. It must be aimed at the Service Provider's antenna. Connection to the Raven100 requires the 14468 cable (see below).
|
||||
| 18285 | 800Mhz 1dBd Omni Cellular Antenna w/Type N Female & CSI Mounting Hardware | |||
|
A choice of four antennas is offered for the Raven110. The 18285 omnidirectional antenna provides a 1 dBd gain, and is recommended where cellular coverage is strong. It is a dual-band antenna—covering both the 800 MHz and 1.9 GHz bands. Connection to the Raven110 requires the 14468 cable (see below).
|
||||
| 20679 | 800MHz/0dBd & 1.9GHz/3dBd Omni Cell Antenna w/Type N Female | |||
|
A choice of four antennas is offered for the Raven110. The 20679 is recommended for locations where cellular coverage is strong. This dual-band omnidirectional antenna covers both the 800-MHz band and the 1.9-GHz band. For the 800-MHz band, the 20679 provides a 0-dBd gain. For the 1.9-GHz band, the 20679 provides a 3-dBd gain. Connection to the Raven110 requires the 14468 cable (see below).
|
||||
| CM230 | Adjustable Angle Mounting Kit | |||
|
The CM230 Adjustable Inclination Mount allows the Yagi antenna to be aimed at the service provider's antenna. It attaches to a mast or pipe with a 1.3" to 2.1" OD.
|
||||
| 21212 | Black Cold Shrink Tape, 10ft long Roll, 1in wide | |||
|
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.
|
||||
| 18663 | Data Cable Null Modem DB9 Male to Male, 1ft | |||
|
The 18663 is one of three choices for attaching the modem to the datalogger. This null modem cable attaches directly to the datalogger's RS-232 port. It is the only choice available for connecting a Raven110 modem to a CR200-series datalogger.
|
||||
| SC932A | CS I/O to 9-Pin RS-232 DCE Interface | |||
|
The SC932A is one of three choices for attaching the modem to the datalogger. This interface connects the Raven110 to the datalogger's CS I/O port. The SC932A is recommended for mixed-array dataloggers.
|
||||
| -XT | -XT Tested -55 to +85C | |||
|
The SC105 is one of three choices for attaching the modem to the datalogger. This interface connects the Raven110 to the datalogger's CS I/O port. The SC105 is recommended for PakBus dataloggers.
|
||||
| Temperature Ranges (hide details) | ||||
| -ST | -ST Tested -25 to +50C | |||
|
The SC105 is one of three choices for attaching the modem to the datalogger. This interface connects the Raven110 to the datalogger's CS I/O port. The SC105 is recommended for PakBus dataloggers.
|
||||
| SC105 | CS I/O to 9-Pin RS-232 DCE Synchronous Interface | |||
|
The SC105 is one of three choices for attaching the modem to the datalogger. This interface connects the Raven110 to the datalogger's CS I/O port. The SC105 is recommended for PakBus dataloggers.
|
||||
| 14394 | Raven & Redwing Mounting Kit | |||
|
The 14394 Mounting Kit includes hardware for securing the Raven110 to the backplate of one of our environmental enclosures.
|
||||
Resources and Links
Related Products
Ships With
(1) CD of Modem Software and Documentation from Airlink
(1) Power cable from original mfg
Feedback?