CM315
CM315
Orderable18.5 in. Mounting Pole with Cap
Pricing
Configuration
Sign in for option pricing- No Pedestal BaseCM315-NPPart Number: 43819
- & J-Bolt Kit (Ships as 43819 & 20572)CM315-PJPart Number: 43845
Select a configuration to add to your quote
- Model:
- CM315
- Item Number:
- CM315
- Warranty:
- 1 year
Overview
The CM315 is a 47 cm (18.5 in.), stainless-steel, 1.5 in. NPS vertical pole. It is designed for mounting sensors, or other instruments, and is an ideal mount for remote sensors such as a RainVue™10 or RainVue 20 precipitation sensor. The sensor is typically mounted to the CM315 via the CM241 Base Plate Mount. This mounting pole can be mounted to a concrete foundation using the CM340 J-Bolt Pedestal Kit for Mounting Pole for a final RainVue rain bucket mounting height of approximately 1 m (3.28 ft).
Note: Grounding connections from the mounting pole to the system’s main tripod/tower or to the ground are important to help protect the system and measurements. The parts to establish these grounding connections are not included with the mounting pole.
Key Advantages
Specifications
- Material
- 304 stainless-steel pipe 1.5 NPS SCH 5
- Outer Diameter
- 4.83 cm
(1.9 in.)
- Length
- 47 cm
(18.5 in.)
- Weight
- 2.95 kg
(6.5 lb)
J-Bolt Kit
- J-Bolt Material
- 304 stainless steel
- J-Bolt Size
- 1/2-13 in. x 12 in.
Other Accessories
(4)CM345
Large Pole to Mast or Crossarm Adapter Kit
The CM345 is an adapter to mount a vertical 1 to 2.5 in, pipe (1.315 to 2.875 in. OD) or a 1 in, horizontal pipe (1.315 in. OD crossarm) to a large pole with a 20.32 to 53.34 cm (8 to 21 in,) diameter. By using this adapter with a vertical mast or crossarm, you can mount other standard Campbell Scientific gear to a larger pole. The vertical pipe clamps used are standard Unistrut clamps.
OrderableCM340
J-Bolt Pedestal Kit for Mounting Pole
The CM340 kit uses j-bolts to attach a mounting pole (CM300 series or user-supplied 1.9 in. OD pipe) to a concrete base for permanent installations where there is a need to periodically plumb the pole. Nuts on the j-bolts are used to adjust the pedestal and pole, and they are then locked in place with additional nuts.
OrderableCM350
Pedestal Kit with 23 in. Legs for a Mounting Pole
The CM350 is a pedestal base to support a 1.5 in. IPS mounting pole. When the CMS350 is used with a mounting pole, the mounting pole becomes a basic tripod for temporary installations or lightweight applications. The CM350 and mounting pole need to be properly grounded (parts not included) and secured to the ground so the equipment doesn't blow over.
OrderableCM355
Pedestal Kit with 39 in. Legs for a Mounting Pole
The CM355 is a pedestal base to support a 1.5 in. IPS mounting pole. When the CM355 is used with a mounting pole, the mounting pole becomes a basic tripod for temporary installations or lightweight applications. The CM355 and mounting pole need to be properly grounded (parts not included) and secured to the ground so the equipment doesn't blow over.
Orderable
Replacement Parts
(2)20610
Black Vinyl Pipe Cap 1-1/2 x 1
The 20610 is the black vinyl cap that fits on the end of our CM300-series mounting poles. The cap helps keep out pests, debris, and precipitation. Although the 20610 is included with each CM300-series mounting pole, it may be purchased to replace a lost or damaged cap.
Orderable39572
UV-Resistant 18 in. Cable Ties (quantity of 10)
The 39572 includes 10 of the 45.7 cm (18.1 in.) black, UV-resistant cable ties (pn 39333). These cable ties are often used with tripods and towers, and this 10-unit pack can be purchased as a replacement item. A connection is made by pulling the tapered end through the locking end, thus forming a loop. The free end is pulled tight to secure the cable tie, then trimmed back to the locking end. Once attached, the cable tie must be cut to be removed.
Orderable
Compatibility
The CM315 uses our standard 3.81 cm (1.5 in.) pipe with an outer diameter of 4.83 cm (1.9 in.).
This pole is not compatible with the CM216 Sensor Mounting Kit for Top of Tripod Mast. A hole must be drilled in the CM315 mounting pole, unlike other masts, to mount a CM216 sensor mounting kit.
J-Bolt Pedestal Kit
The J-Bolt Kit is for permanent installations. With this kit, customers can more easily control the pole‘s placement, ensuring that the pole remains in a vertical position. J-bolts are installed in a concrete foundation using the template provided with the kit. Leveling nuts allow adjustment of the pole’s position.