Internet and IP Networks
Add Internet connectivity to your datalogger network
Current Products
NL240 Wi-Fi Network Link
The NL240 is a wireless networking peripheral that provides Wi-Fi connectivity to our dataloggers and peripheral devices over standard 802.11b/g/n networks. It is a low-power...
NL200 Network Link Interface
Campbell Scientific's NL200 is a powerful network link interface that provides a wired Ethernet network connection to dataloggers and peripherals. It allows our dataloggers, as...
NL120 Ethernet Interface
The NL120 allows the datalogger to communicate over a local network or a dedicated Internet connection via TCP/IP. This small, rugged communication device connects directly...
NL115 Ethernet Interface and CompactFlash Module
Campbell Scientific’s NL115 enables 10baseT Ethernet communications and stores data on a removable CompactFlash® card. This small, rugged communication device connects to the 40-pin peripheral...
RAVENXTV Cellular Digital Modem for Verizon
The Airlink RavenXTV is a CDMA modem configured for Verizon cellular networks. This full-duplex modem transmits data to the local cellular tower using a CDMA...
RAVENXTG Cellular Digital Modem for AT&T
The Airlink RavenXTG is a GPRS modem configured for AT&T digital cellular networks. This full-duplex modem transmits data to the local cellular tower using a...
Digital Cellular Modem Accessories
This section includes mounting kits, cables, and other products that are used in conjunction with cellular digital modems.
Resources and Links
About Internet and IP Networks
These products allow Campbell Scientific dataloggers to communicate with a computer using TCP/IP. The local network or dedicated Internet connection can also be accessed in combination with short-haul or RF peripherals.
FAQs for
Why can't an OS be remotely loaded to a CR1000, CR3000, CR850, or CR800 from a Dell D600 laptop?
This issue occurs only with the D600 laptop and is solved by updating the D600's Ethernet driver from the Dell website.
Feedback?